Boneham AM00000830 Slip-fixed Bushing Sfm 17mm Id

Product Description

The BONEHAM AM00000830 is a slip-fixed drill bushing conforming to the SFM industry standard. It is designed to guide cutting tools accurately through jig plates during drilling, reaming, or boring operations in metalworking and machining environments. The bushing features a 17 mm inside diameter for tool guidance, a 26 mm body outside diameter for secure seating in the jig plate, and a 20 mm length under the head. This type of bushing is installed and removed without tools, making it well suited for production jigs where bushings are changed frequently between operations. Machinists, tool-and-die makers, and fixture builders are the primary installers.

Slip-fixed bushings of this type are used in drill jig assemblies found in general machining shops, manufacturing production lines, and maintenance repair operations. The slip-fixed design allows the bushing to be rotated into a locked position within a liner bushing, then rotated out when a different operation requires a different bushing in the same location. This part is sold individually and is suited for both new jig builds and replacement of worn bushings in existing fixtures.

Key Features

• SFM industry code conformance for interchangeability with standard jig bushing systems
• 17 mm inside diameter guides cutting tools with close tolerances
• 26 mm body outside diameter for precise fit within compatible liner bushings
• 20 mm length under head provides adequate tool guidance depth for typical jig plate thicknesses
• Renewable bushing design allows removal and replacement without disturbing the jig plate
• Sold as a single unit for flexible ordering

Compatibility

Designed as an OEM-style replacement or new-build component for drill jig assemblies requiring an SFM slip-fixed bushing with a 17 mm inside diameter and a 26 mm body outside diameter.

Installation Notes

Installation is performed by machinists or toolmakers during jig assembly or bushing replacement. The bushing is inserted into a compatible liner bushing and rotated to the locked position; no press or adhesive is required. Before replacing a bushing in an active jig, ensure the associated machine is powered down and all cutting tools are clear of the work area. Verify the liner bushing bore and the replacement bushing outside diameter conform to SFM tolerance standards before installation.