Beckett G210A Submersible Water Pump 210 Gph 7.1 Ft

Product Description

The BECKETT G210A is a direct-drive submersible water pump designed for continuous-duty operation in ponds, fountains, and light industrial water-circulation applications. Running on 115 volts at 60 Hz and drawing 30 watts, it delivers 210 gallons per hour at 1 foot of head with a maximum lift of 7.1 feet. The epoxy-encapsulated motor is not oil-filled, making it environmentally safe for use in water features where contamination is a concern. An impedance-protected motor adds a layer of electrical safety, and the unit is UL listed. Licensed trade professionals and experienced DIYers install this pump in low-voltage, continuously submerged environments where reliable flow and low maintenance are required.

The G210A is suited for residential and light commercial pond circulation, fountain features, waterfall systems, and similar continuous-flow water applications. Its compact footprint and 1/4-inch male NPT discharge fitting with compatibility for 1/2-inch ID tubing make it adaptable to a range of plumbing configurations. The 6-foot cord with a grounded plug allows straightforward connection to a standard grounded outlet near the installation site, reducing the need for additional wiring work in most typical pond or fountain setups.

Key Features

• Epoxy-encapsulated motor - not oil-filled - for environmentally safe submerged operation
• 210 GPH flow rate at 1 foot of head with 7.1-foot maximum lift
• Impedance-protected motor for added electrical safety
• UL listed for electrical safety compliance
• 1/4-inch MNPT discharge fitting accepts 1/2-inch ID tubing
• 6-foot grounded power cord for direct plug-in installation

Compatibility

Designed as an OEM-style replacement or upgrade for residential and light commercial submersible pump applications requiring 210 GPH flow capacity and up to 7.1 feet of lift.

Installation Notes

Installation should be performed by a qualified technician or knowledgeable installer familiar with low-voltage submersible pump systems. Always disconnect power at the outlet or circuit breaker before handling the pump or servicing plumbing connections. The pump must remain fully submerged during operation to prevent motor damage. Confirm that the outlet used is GFCI-protected in accordance with NEC requirements for wet and aquatic locations.