Associated Spring Raymond 103-614 Die Spring Blue

Product Description

The ASSOCIATED SPRING RAYMOND 103-614 is a medium-duty die spring engineered for use in stamping dies, press tooling, and industrial machinery applications. It features a trapezoidal wire cross-section that increases load capacity and service life compared to round-wire springs of equivalent size. The spring has a 1-1/4 inch hole diameter, a 5/8 inch rod diameter, and a 3-1/2 inch free length. It carries a maximum deflection load of 350 pounds and a maximum deflection of 1.75 inches, with a spring rate of 200 pounds per inch. The blue color coding indicates medium-duty load classification per standard die spring conventions. Manufactured from chromium alloy steel for durability under cyclic compressive loading.

This die spring is suited for installation in stamping and forming dies, injection mold tooling, and general industrial press applications requiring consistent, repeatable spring force. It is appropriate for both OEM tooling builds and replacement maintenance in manufacturing and fabrication environments. The rod and hole dimensions allow it to be guided over a 5/8 inch rod or inside a 1-1/4 inch bore for stable, aligned operation during press cycles.

Key Features

• Trapezoidal wire shape increases load capacity and fatigue life over round-wire alternatives
• Maximum deflection load of 350 pounds with a spring rate of 200 pounds per inch
• Maximum deflection of 1.75 inches at 3-1/2 inches free length
• Blue color coding denotes medium-duty classification for quick field identification
• Chromium alloy steel construction for resistance to cyclic stress and wear
• Certified to ISO 9001:2008, ISO/TS 16949:2009, and TUV Rheinland quality standards

Compatibility

Designed as an OEM-style replacement or direct tooling component for industrial die and press applications requiring a medium-duty spring with a 1-1/4 inch hole diameter, 5/8 inch rod diameter, and 3-1/2 inch free length.

Installation Notes

Die springs are installed by trained tooling and maintenance technicians familiar with press and stamping die systems. Always relieve all stored energy and lock out the press before removing or installing spring components. Ensure the guide rod and bore are clean and within specified tolerances before seating the spring. Never stack die springs or compress them beyond the rated maximum deflection to avoid permanent set or failure.