All-source 018032 Pvc Cpvc Abs Multipurpose Clear Cement

Product Description

The ALL-SOURCE 018032 is a medium-bodied, medium-set, multipurpose clear solvent cement formulated for use on PVC, CPVC, and ABS pipe and fittings. It bonds Schedule 40 and Schedule 80 pipe in sizes up to 6 inches in diameter. The medium body provides good gap-filling on slightly out-of-round or larger-diameter pipe while the medium set time gives installers a reasonable working window before the joint cures. Licensed plumbers and pipefitters working on residential and commercial systems reach for this cement when a single product needs to cover multiple plastic pipe materials across one job.

This cement is suited for pressure pipe, gas service piping, electrical conduit, and drain-waste-vent installations where PVC, CPVC, or ABS plastic pipe and fittings are specified. It handles Schedule 40 and Schedule 80 wall thicknesses and is rated for pipe diameters up to 6 inches, making it appropriate for both branch lines and larger mains on commercial projects. Plumbers, pipefitters, and licensed electrical conduit installers all use this product in their standard joining workflow.

Key Features

• Compatible with PVC, CPVC, and ABS pipe and fittings - one cement covers multiple plastic materials
• Medium body formula fills gaps on Schedule 40 and Schedule 80 pipe up to 6 inches in diameter
• Medium set time provides adequate working window for joint alignment before cure
• Clear formulation leaves a clean, low-visibility bead at the joint
• Rated for pressure pipe, gas, conduit, and drain-waste applications
• Meets ASTM D-2564, D-2235, and F-493 standards

Compatibility

Designed for use on PVC, CPVC, and ABS pipe and fittings, Schedule 40 and Schedule 80, Types I and II, in diameters up to 6 inches, across pressure pipe, gas, conduit, and drain-waste-vent applications.

Installation Notes

This cement is typically applied by licensed plumbers, pipefitters, or electrical conduit installers in accordance with the International Plumbing Code or applicable local codes. Before cementing, ensure pipe ends are cut square, deburred, and cleaned with the appropriate primer where required by code or manufacturer guidance. Apply cement in a light, even coat and assemble the joint with a quarter-turn while pushing to full socket depth. Allow adequate cure time before pressure-testing or returning the system to service.