Accupro 07074305 High-feed Face Mill 2 Inch 4 Flute

Product Description

The ACCUPRO 07074305 is a 2-inch indexable high-feed face mill designed for aggressive material removal at shallow depths of cut. It accepts four XOLT-style inserts held by screw clamping and is built for right-hand cutting direction. With a maximum depth of cut of 0.0787 inches and a maximum spindle speed of 18,800 RPM, this cutter is optimized for high-feed milling strategies that keep chip loads high while axial engagement stays low. It mounts on a 0.7500-inch arbor with a 0.3210-inch keyway width for positive drive. Machinists and CNC operators working in job shops or production environments will find this cutter well-suited to face milling and light ramping operations.

The 07074305 is intended for use on CNC machining centers and manual mills where a 0.7500-inch arbor mount is available. Its CI-series designation and ASSM cutter style indicate a design suited to face milling on ferrous and non-ferrous workpieces. The maximum ramping angle of 1.3 degrees supports shallow helical or linear ramping entry moves. With four insert pockets and a compact 2-inch cutting diameter, this mill is a practical choice for smaller spindles and tight-clearance workholding setups.

Key Features

• 2-inch cutting diameter with four indexable XOLT insert pockets
• Maximum depth of cut of 0.0787 inches supports high-feed, low-engagement strategies
• Maximum spindle speed of 18,800 RPM for high-productivity applications
• Screw-clamp insert holding method for secure, repeatable seating
• Right-hand cutting direction with 1.3-degree maximum ramping angle
• 0.7500-inch arbor hole with 0.3210-inch keyway for positive drive engagement

Compatibility

Compatible with XOLT-style inserts using insert size code 13. Designed as an arbor-mount face mill for machining centers and milling machines with a 0.7500-inch arbor diameter.

Installation Notes

Installation should be performed by a qualified machinist or CNC operator. Power down and lock out the machine spindle before mounting or changing inserts. Ensure the arbor and keyway are clean and free of chips before seating the cutter. Follow the machine tool manufacturer's torque specifications for the arbor draw bolt and insert screws.