nvent

Product Description nVent 4BRT32WS is a threaded bridle ring designed to support cable and wiring in datacom, low-voltage, and electrical installations. The steel ring features an electro-galvanized finish, a 2 in diameter, and mounts with a #14 x 3/4 in wood screw. It has...

Product DescriptionThe NVENT 4BRT32WS is a two-inch threaded bridle ring made for cable tying applications. It is built from steel and has an electrogalvanized finish. The product comes with a fourteen gauge wood screw that is three-quarters of an inch long. This bridle ring...

Product Description The NVENT 4brt64 is a threaded bridle ring designed to support and route cables in commercial and industrial electrical installations. With a 4-inch diameter ring and a 1/4-inch threaded screw for attachment, this metal bridle ring provides a secure anchor point for...

Product DescriptionThe NVENT 4EBN is a 1/4 inch rod push nut fastener used to secure threaded rod in mechanical, electrical, and plumbing support assemblies. It presses onto the end of a 1/4 inch threaded rod and locks in place without tools, creating a positive...

Product Description The Nvent 4G16 is a twist-on clip from nVent CADDY designed for 15/16 in T-grid installations, providing a static load capacity of 50 lb and including a wing nut for fastening. It installs without special tools by twisting onto the T-bar and...

Product DescriptionThe NVENT 4G16 is a twist clip designed for securely supporting electrical fixtures from acoustical T-grids. This product requires no special tools for installation, allowing for quick and secure mounting with a twist-on mechanism. A wing nut is included for added security.Key Features...

Product DescriptionThe NVENT 4G16H is a twist-to-install clip designed to create a secure mounting point for wire and chain on acoustical T-grid ceiling systems. The clip features a 1/4 inch plain hole and mounts to 15/16 inch T-grid without tools, using a simple 90-degree...

Product Description The NVENT 4G16LN is a T-Grid twist clip with stud designed for securing electrical components and fixtures to suspended ceiling grid systems. Built from spring steel with the nVent Caddy Armour finish, this clip provides durable, corrosion-resistant attachment in both electrical fixing...

Product Description The NVENT 4G8 twist clip is designed for track lighting applications. It features a fast, easy, and secure twist-on installation, requiring no special tools. This clip is suitable for 15/16" T-grids and utilizes a #8 screw with a 5/8" length. It is...

Product DescriptionThe NVENT 4G8WH is a twist clip designed for track lighting installations. This clip helps secure track lighting systems to T-grid ceilings. It fits into a fifteen-sixteenth inch T-grid and uses a 8 x 5/8 inch screw. Designed for track lighting applications Easy...

Product Description The NVENT 4h24 is a hammer-on flange clip designed for fast, tool-free attachment points on flanges and structural profiles. Fabricated from spring steel, the clip seats firmly onto flanges ranging from 1/8 inch to 1/4 inch thick using a side-mount configuration. Once...

Product Description The NVENT 4h58 is a hammer-on flange clip designed for fast, tool-light attachment to structural steel beam flanges. It mounts to the side of the flange, giving installers a flexible and accessible attachment point for supporting wire, chain, or Speed Link applications....

Product Description The NVENT 4TI Thread Install Rod Hanger is designed to support wire or rod from block or concrete walls. Constructed from Spring Steel with an nVent CADDY Armour finish, it features a 1/4 inch threaded hole and a 1/4 inch plain hole....

Product Description The NVENT 4TI24 is a beam clamp designed to attach 1/4 inch threaded rod to structural steel beams and flanges. It provides a secure, tool-friendly connection point for hanging threaded rod used in pipe, conduit, duct, and equipment support applications. The clamp...

Product Description The NVENT 4TI58 H-Ti/T Rod to Flange Clip suspends threaded rods from beam flanges. The threaded rod hanger can swivel to provide a vertical dropdown and requires only a hammer to install. It is made of spring steel with nVent CADDY Armour...

Product Description The NVENT 4TI912 is a 1/4-inch rod beam clamp designed to secure threaded rod to structural steel beams in mechanical, electrical, and plumbing support systems. It provides a rigid attachment point for hanging pipe, conduit, duct, and equipment from beam flanges without...

Product DescriptionThe NVENT 4TIB is a quarter-inch angle bracket support designed for securing conduit, pipe, and related mechanical systems to structural surfaces. This type of bracket provides a rigid mounting point at a fixed angle, allowing trades to anchor runs cleanly against walls, beams,...

Product Description The NVENT 4TIB is a threaded rod hanger with angle bracket designed to support threaded rod installations from concrete ceilings and decks. The hanger features two 0.25-inch holes: one plain and one threaded, allowing attachment of a 1/4-inch threaded rod. This hardware...

Product Description The NVENT 4tibsf is a threaded rod hanger designed to suspend 1/4-inch threaded rod directly from concrete, steel, or composite metal decking without requiring additional fastening hardware. The assembly arrives pre-configured with a shot-fire bracket and a pre-assembled drive pin sourced from...

Product Description The Nvent 4TIO is a thread-install rod hanger with an offset bracket designed to suspend plain rod, threaded rod, or wire drops from vertical structures. It is constructed of spring steel/steel with a pre-galvanized finish, features a 1/4 in threaded hole, and...