nvent

Product DescriptionThe NVENT 615860 is a copper-bonded ground rod designed for grounding and bonding applications. This pointed ground rod measures 5/8 inch in diameter and is 6 feet long. It features a 10 mil copper plating for conductivity and durability.Key Features Pointed type for...

Product DescriptionThe NVENT 615880 is a copper-bonded ground rod with a diameter of five-eighths of an inch and a length of eight feet. This product is designed for effective grounding and bonding in various electrical applications.Key Features Diameter: 5/8 inches Connection Type: Exothermic Material...

Product Description The NVENT 65PLUS is a premeasured, self-contained exothermic welding material cup used in the Cadweld Plus system. Each cup contains a pre-loaded charge of welding material that is placed directly into a compatible mold and ignited using the ERICO Cadweld Plus Impulse...

Product Description The NVENT 6M is a 3/8-inch conduit clip designed to secure conduit runs to structural surfaces in electrical installations. This clip provides a fast, reliable method for anchoring conduit without the need for additional hardware, keeping runs tight and organized. It is...

Product DescriptionThe nVent CADDY 6M24 EM-M Conduit/Pipe to Flange Clip offers a strong solution for securing conduit or pipe from beam flanges. This clip is engineered from durable spring steel and is designed for effective installation with minimal effort. Supports conduit/pipe or cable from...

Product Description The NVENT 6M24SM H-MSM Conduit/Pipe to Flange Clip is designed to secure conduit, pipe, or cable to beam flanges. It features a snap close clip that pivots 360 degrees and can be installed with just a hammer. It is suitable for 3/8"...

Product Description The NVENT 6M58 is a 3/8-inch conduit hanger clamp designed to secure conduit runs to structural supports in electrical installations. This type of clamp provides a reliable mechanical attachment point, keeping conduit in place along walls, ceilings, and framing members. Licensed electricians...

Product DescriptionThe NVENT 6MB18A combination box/conduit hanger supports electrical installations. This hanger holds three-eighths inch flexible conduit and fourteen-two to twelve-three MC/AC cable. A quarter inch plain hole is designed for mounting.Key Features Holds three-eighths inch flexible conduit and fourteen-two to twelve-three MC/AC cable....

Product Description The NVENT 6TI24 rod to flange clip suspends threaded rods from beam flanges. The threaded rod hanger can swivel to provide a vertical dropdown. It requires only a hammer to install. It is made of spring steel with nVent CADDY Armour finish....

Product Description The NVENT 6ti58 is an H-Ti/T Rod to Flange Clip designed to suspend threaded rod from structural flanges in commercial and industrial installations. Constructed from electro-galvanized spring steel, it handles a rated load capacity of 200 pounds and accepts flanges ranging from...

Product Description The NVENT 6TI912 H-Ti/T Rod to Flange Clip suspends threaded rods from beam flanges. The threaded rod hanger can swivel to provide a vertical dropdown. It requires only a hammer to install. It is made of spring steel with nVent CADDY Armour...

Product Description The NVENT 6TIB Thread Install Rod Hanger with Angle Bracket suspends threaded rod from horizontal structures such as laminated wood or concrete beams, joists, ceilings, and walls. It features a 0.25" plain hole and a 0.375" threaded hole. It is suitable for...

Product Description The NVENT 6tio is a thread-install rod hanger with an offset bracket, designed for suspending threaded rod from structural steel, beam flanges, or similar overhead surfaces in mechanical and electrical installations. Built from pre-galvanized steel, it accepts a 3/8-inch threaded hole and...

Product DescriptionThe NVENT 6to is a thread-install rod hanger with an offset bracket designed for securing threaded rod in mechanical, electrical, and plumbing support applications. Constructed from spring steel and steel with a pre-galvanized finish, this hanger delivers a 160 lb static load capacity...

Product Description The NVENT 6Z34 is a multi-functional clip designed for securing and supporting conduit, cable, pipe, or other trade materials during installation. This type of fastening hardware is a staple in electrical, plumbing, and mechanical rough-in work, allowing tradespeople to anchor runs to...

Product Description Nvent 6Z3412P is a Caddy conduit-to-rod/wire clip designed for attachment of conduit and electrical boxes. It fits 3/4 in EMT and 1/2 in rigid conduit with an outer diameter range of 0.866 to 1.181 in, accepts 3/8 in rod, and is compatible...

Product Description The NVENT 708 is a rod hanger designed to support and secure 8 AWG wire or 1/4-inch threaded rod in electrical and mechanical installations. This type of hanger is commonly used to suspend conduit, cable trays, pipe, and other trade components from...

Product Description The Nvent 740 Pipe Sleeve Positioner is a hammer-installed spring steel device used to position pipe sleeves and prevent movement during concrete pours. It fits Schedule 40 pipe with sleeve diameters from 2" to 6" and accommodates wall thicknesses of 5/16" and...

Product Description The NVENT 760 is an adjustable far-side box support designed for retrofit electrical and low-voltage installations. It secures junction boxes and outlet boxes from the far side of a wall cavity, providing a stable mount without requiring access to the stud bay...