nvent

Product DescriptionThe Erico WMX3 CAD WMX3 Tie Wire Hanger is designed for secure cable support. This product features a robust construction suitable for various wiring applications. Its load capacity makes it ideal for static loads in electrical setups. Material: Electrogalvanized Steel Load Capacity: Fifty...

Product Description The ERICO-NVENT-CADDY 12312P is a conduit to Z purlin clip designed for attaching conduit to purlins. Made from spring steel with nVent CADDY Armour finish, it supports 1/2in rigid conduit and accommodates flange thicknesses of 0.0600″ – 0.1000″. It features a bottom...

Product Description The ERICO-NVENT-CADDY 12P16P is a push-in conduit to conduit clamp, ideal as a spacer between same or different size conduits. Installation requires no tools. Note that the top conduit should be used for support only, not as a raceway. It features outer...

Product Description The ERICO-NVENT-CADDY 16P58 EM-P Conduit to Flange Clip is designed for 1" EMT and 3/4" rigid conduits, accommodating outer diameters from 1.181" to 1.378" and flange thicknesses from 5/16" to 1/2". This clip is made from spring steel with nVent CADDY Armour...

Product Description The ERICO-NVENT-CADDY 32M24SM is a conduit/pipe to flange clip designed to support conduit, pipe, or cable from beam flanges. It is made of steel with a Caddy Armour finish and supports a 2 in conduit with a 25 lb load capacity. The...

Product Description The ERICO-NVENT-CADDY 4010125HD clevis hanger is recommended for suspending stationary non-insulated pipe lines. It features flared edges to prevent sharp surfaces from contacting the pipe, suitable for 1/2" to 2" pipe sizes. The clevis bottom pivots, allowing pipe to be fed from...

Product Description The ERICO-NVENT-CADDY 4ACS conduit/box to T-grid support provides a method for attaching above acoustical tee bars. It features a thread impression hole for direct attachment to an outlet box or conduit clips. This support provides an exact alignment when used in combination...

Product Description The ERICO-NVENT-CADDY 4BRT32 threaded bridle ring, with a 2" diameter and 1/4" screw, supports cables from flange, purlin, drop wire, and t-grid when combined with other nVent CADDY fasteners. It is made of electrogalvanized steel with a 50lb load rating. Pack of...

Product Description The ERICO-NVENT-CADDY 512HDFM35 heavy-duty fan or fixture mount kit supports up to 35 lb with a single brace. The 2-1/8 in electrical box is pre-mounted in the center of the brace and features three open knockouts for installation. The installed box position...

Product Description The ERICO-NVENT-CADDY 517A light fixture suspension bar is designed for T-grids, reducing installation time. It requires no tools for installation and features end clips that rotate for mounting horizontal or vertical base plates. The position of the fixture is adjustable, and it's...

Product Description The ERICO-NVENT-CADDY 6TA58 is a rod beam clamp. This clamp is designed for securing rods to beams, providing a reliable and stable connection in various construction and electrical applications. Designed for rod to beam connections Accommodates 1/4-3/8 inch rods Ensures stable and...

Product Description The ERICO-NVENT-CADDY 812M24SM is a locking snap close conduit clip designed for 0.5 - 0.75 in EMT/rigid nominal opening and 0.125 - 0.25 in flange. Constructed from steel with a zinc phosphate finish, it supports a load capacity of 25 lb. This...

Product Description The ERICO-NVENT-CADDY 8P8P Caddy Armor Spring Steel Conduit to Conduit Clamp is a 1/2 Inch EMT clamp. It is ideal as a spacer between same or different size conduit and requires no tools for installation. The top conduit should be used for...

Product Description The ERICO-NVENT-CADDY BC12PSM is a conduit to beam clamp designed for 3/4" EMT conduit with a 0.5" maximum flange thickness. It is constructed from spring steel with nVent CADDY Armour finish. The clamp simplifies installation to beam flanges and eliminates the need...

Product Description The ERICO-NVENT-CADDY CD6B is a bolt close conduit/pipe clamp made of steel, designed for 2 1/2" EMT and 2 1/2" rigid/pipe. It features a 0.313" hole and electrogalvanized finish. The clamp supports static loads of 350lb (F1) and 50lb (F2). It is...

Product Description The ERICO-NVENT-CADDY LCSB12 support box provides a convenient method for supporting an electrical box from a lathers channel. Its one-piece/two-piece construction helps prevent dropping loose parts, and built-in thread impressions eliminate the need for nuts. Designed for use with 3/4in, 1 1/2in,...

Product Description The ERICO-NVENT-CADDY MFA625 is a clip-on strut nut made from spring steel, designed with a 1/4" hole and includes a 0.625" screw. It features nVent CADDY Armour finish and supports a static load of 100lb. The product is supplied in standard packaging...

Product Description The ERICO-NVENT-CADDY PPRPS25H6 pipe support block features a base made of ABS material, with base dimensions of 5.69 inches in length and 4.69 inches in width. It accommodates maximum pipe sizes of 1 inch and minimum pipe sizes of 1/2 inch, with...

Product Description The ERICO-NVENT-CADDY PRA3H12 is a height-adjustable, roller-based support designed for rooftop applications. It allows effective navigation of pipe around obstructions. The foam bottom offers a low abrasion interface for better roof membrane protection and is compatible with single ply, bituminous, metal, and...

Product Description The nVent CADDY Pyramid ST Fixed Strut Support, MPN PSF16D, offers a simple solution for mounting electrical and mechanical services on commercial rooftops. It evenly distributes weight across the base and features a foam pad to protect roof membranes. Constructed with UV-stabilized...