MUELLER STREAMLINE

Product DescriptionThe MUELLER STREAMLINE 20KMR6 is a large-diameter flexible HVAC duct designed for commercial air distribution systems that demand high airflow capacity and effective thermal performance. Built with a foil jacket and R-6 insulation, this duct helps minimize heat gain and loss across major...

Product Description The Mueller Streamline 61230250C is a standard preassembled refrigeration/air conditioning line set constructed of C12200 copper with Duraguard UV coated elastomeric insulation. The 25 ft assembly pairs a 3/8" liquid line with a 3/4" suction line and a 1" insulation wall thickness,...

Product DescriptionThe MUELLER STREAMLINE w 01023 is a reducing coupling fitting with a C x C (copper-to-copper) solder-joint connection, sized at 1/2 inch by 3/8 inch. It is used in pressurized copper supply systems where a line reduction between two different tube diameters is...

Product Description The MUELLER STREAMLINE w 03030 is a 45-degree solder-joint copper elbow designed for pressurized supply systems. It connects copper tubing at a 45-degree angle using a sweat (C x C) end style, making it a standard fitting in residential and commercial plumbing...

Product Description The MUELLER STREAMLINE w 02834 is a long-radius street 90-degree elbow copper fitting designed for solder-joint supply and pressurized piping systems. It features a fitting-end (FTG) inlet and a cup-end (C) outlet, allowing it to fit directly into another fitting socket without...

Product DescriptionThe MUELLER STREAMLINE 6KMR6 is a flexible HVAC duct designed for branch runs and takeoff connections in forced-air distribution systems. It features a foil jacket with R-6 insulation, which limits heat gain and loss along the duct run and improves system efficiency. The...

Product Description The MUELLER STREAMLINE w 02828 is a 90-degree long radius street elbow fitting designed for copper solder-joint plumbing systems. It connects in a fitting-to-copper (FTG x C) configuration, allowing one end to insert directly into another fitting socket without an additional coupling....

Product Description The MUELLER STREAMLINE 12KMR6 is a foil-jacketed flexible HVAC duct designed for air distribution in systems that require higher insulation performance. With an R-6 insulation rating and a 12-inch diameter, this flex duct limits heat gain and loss across the duct run,...

Product Description The MUELLER INDUSTRIES MH14010 is a Type M copper water tube manufactured from Grade C12200 phosphorus deoxidized copper. It measures 1-5/8 inches outside diameter with a 1.527-inch inside diameter and a 0.049-inch wall thickness, yielding a 10-foot straight length. At 0.94 pounds...

Product DescriptionThe MUELLER STREAMLINE ABSDBLSANT112 is a 1-1/2 inch ABS double sanitary tee hub fitting designed for drain, waste, and vent (DWV) piping systems. This hub-end fitting accepts standard 1-1/2 inch ABS pipe on all ports and allows two branch lines to tie into...

Product Description The MUELLER STREAMLINE W 01743 is a copper flush bushing designed for solder-joint pressure piping systems. It transitions from a 1-1/4 inch sweat (C) connection on the fitting end to a 1 inch female NPT (FNPT) thread on the outlet end. Rated...

Product Description The MUELLER STREAMLINE K270770 is a reducing double sanitary tee designed for drain, waste, and vent (DWV) piping systems. This fitting features a 3 x 2 x 3 x 2 inch nominal configuration with hub end connections and is manufactured from Schedule...

Product DescriptionThe MUELLER STREAMLINE COADCFIPRED3814 is a copper female reducing adapter configured in a C x FIP end pattern, designed to transition from a 3/8-inch copper sweat connection to a 1/4-inch female iron pipe thread. This fitting is used in plumbing and hydronic systems...

Product Description The MUELLER STREAMLINE 436-012 is a 1-1/4 inch PVC Schedule 40 socket by male threaded adapter designed for drain, waste, and vent (DWV) piping systems. It transitions from a hub (socket) connection on one end to a male threaded connection on the...

Product Description The MUELLER STREAMLINE W 02701 is a 90-degree long radius elbow fitting manufactured from wrot copper for use in solder-joint supply and pressurized plumbing systems. The long radius geometry reduces turbulence and pressure drop compared to standard short-radius elbows, making it a...

Product DescriptionThe MUELLER STREAMLINE PDWVBEND143 is a 3-inch PVC drain, waste, and vent (DWV) quarter bend fitting with a hub-by-hub (HxH) connection configuration. It redirects drain or vent piping at a 90-degree angle and is manufactured from PVC for lightweight handling and corrosion resistance....