Mueller Streamline TUB14384 Copper Tubing 3/8 in Od 50 Ft

Product Description

The MUELLER STREAMLINE TUB14384 is a refrigeration-grade copper tubing coil used in HVAC and refrigeration systems for refrigerant line sets, suction and liquid lines, and related piping applications. The coil measures 3/8 inch outer diameter with a 0.032 inch wall thickness and supplies 50 feet of working length per coil. Refrigeration-grade copper tubing is manufactured to tighter cleanliness and temper standards than plumbing-grade alternatives, making it suitable for use with modern refrigerants where moisture and contamination control are critical. Licensed HVAC technicians and refrigeration mechanics are the primary installers of this product.

This tubing coil is well suited for residential and light commercial HVAC and refrigeration installations. The 3/8 inch OD size is commonly used for suction lines on smaller split systems, refrigerant interconnecting tubing, and condensate or process lines where copper is specified. The 50-foot coil length provides enough run for most standard residential line set installations without requiring additional joints. It is compatible with standard swage, flare, and solder fittings designed for 3/8 inch OD copper refrigeration tubing.

Key Features

• Refrigeration-grade copper construction meets cleanliness and temper requirements for refrigerant service
• 3/8 inch OD with 0.032 inch wall thickness provides reliable pressure integrity for typical refrigerant operating pressures
• 50-foot coil length reduces the need for mid-run joints, lowering leak potential
• Coil format allows flexible routing through walls, ceilings, and chases
• Compatible with standard flare, swage, and solder fittings for 3/8 inch OD copper tubing

Compatibility

Designed as a refrigeration-grade replacement or new-installation copper tubing coil for use with standard 3/8 inch OD swage, flare, and solder-type fittings in HVAC and refrigeration piping systems.

Installation Notes

Installation should be performed by a licensed HVAC technician or refrigeration mechanic familiar with EPA Section 608 refrigerant handling requirements. Evacuate and recover refrigerant from any existing system before cutting into refrigerant lines. Use a tubing cutter sized for copper to produce clean, burr-free cuts, and ream cut ends before flaring or soldering to prevent contamination and restriction. Follow local mechanical codes and manufacturer line set specifications for minimum bend radius and support spacing when routing the coil.

Technical Specifications

• Outer Diameter (OD): 0.38 inches
• Wall Thickness: 0.032 inches
• Length: 50 feet
• Shipping Weight: 6.70 pounds
• Grade: Refrigeration Grade

Standard Information

• Brand: MUELLER STREAMLINE
• Manufacturer Part Number: TUB14384