walter

Product Description The WALTER-PROTOTYP 5081178 is a spiral flute pipe tap designed for cutting 1/4-18 NPT internal pipe threads in ferrous materials. Built from M35 cobalt high-speed steel with an oxide finish, it delivers elevated heat resistance and edge retention in demanding tapping applications....

Product DescriptionThe WALTER-PROTOTYP 5081179 is a spiral flute pipe tap designed for cutting 1/8-27 NPT internal pipe threads in a range of ferrous materials. Built from M35 cobalt high-speed steel with an oxide finish, this tap delivers added heat and wear resistance compared to...

Product Description The WALTER-PROTOTYP 5081191 is a spiral flute pipe tap designed for cutting 1/2-14 NPTF internal pipe threads in demanding ferrous materials. Built from M35 cobalt high-speed steel with an oxide finish, this tap handles elevated heat and abrasion in materials that standard...

Product Description The WALTER-PROTOTYP 5082195 is a solid carbide square end mill designed for precision milling in metalworking and machining applications. With a 0.1024-inch cutting diameter, a 0.1181-inch length of cut, and a 3-flute configuration, this tool delivers clean, accurate material removal in tight-tolerance...

Product DescriptionThe WALTER-PROTOTYP 5083995 is a single-flute solid carbide square end mill designed for precision milling of non-ferrous metals. With a cutter diameter of 0.1969 inches (5.00 mm) and a length of cut of 0.3937 inches (10.00 mm), this end mill is built for...

Product Description The WALTER-PROTOTYP 5083996 is a solid carbide square end mill engineered for precision material removal in non-ferrous metal applications. With a cutter diameter of 0.2362 inches (6.00 mm) and a length of cut of 0.3937 inches (10.00 mm), this single-flute tool is...

Product Description The WALTER-PROTOTYP 5101572 is a cobalt (M35 material grade) spiral flute pipe tap designed for cutting 1/8-27 NPT internal pipe threads in both blind and through-hole applications. The 40-degree right-hand helix angle evacuates chips up and out of the hole, reducing clogging...

Product Description The WALTER-PROTOTYP 5115564 is a solid carbide helical flute thread mill designed for cutting internal 1/8-27 NPT threads in a single helical pass. The tool features three right-hand flutes and a TiCN coating that increases surface hardness and wear resistance compared to...

Product Description The WALTER-PROTOTYP 5150510 is a solid carbide corner radius end mill engineered for high-speed cutting applications in steel and non-ferrous metals. The tool features a 0.8 mm cutting diameter with a 0.05 mm corner radius, two right-hand helical flutes at a 30-degree...

Product DescriptionThe WALTER-PROTOTYP 5160615 is a solid carbide internal helical flute thread mill designed for precision thread milling in ferrous and non-ferrous materials. With a 9.90 mm cutting diameter, 18 teeth per inch (TPI), and a TiCN coating for extended tool life and heat...

Product DescriptionThe WALTER-PROTOTYP 5344189 is a spiral flute tap designed for blind hole threading in demanding materials. Built from powdered metal and coated with AlCrN for heat and wear resistance, this tap cuts a 1/4-28 UNJF right-hand thread to a 3B class of fit....

Product Description The WALTER-PROTOTYP 5344190 is a spiral flute tap designed for threading 5/16-24 UNJF holes in high-temperature alloys including cobalt alloys, iron alloys, nickel alloys, titanium, and titanium alloys. Built from powdered metal and coated with AlCrN for heat and wear resistance, this...

Product DescriptionThe WALTER-PROTOTYP 5344191 is a spiral flute tap designed for blind hole threading in high-temperature alloys, including cobalt alloys, iron alloys, nickel alloys, titanium, and titanium alloys. Built from powdered metal and coated with AlCrN for heat and wear resistance, this tap produces...

Product Description The WALTER-PROTOTYP 5543416 is a solid carbide square end mill designed for high-performance milling of steel and stainless steel. It features a 0.5 inch cutting diameter, a 2 inch length of cut, and a 4.5 inch overall length with a 0.5 inch...

Product Description The WALTER-PROTOTYP 5543418 is a solid carbide square end mill designed for high-performance milling in steel and stainless steel applications. With a 0.75 inch cutting diameter, a 2.25 inch length of cut, and a 5 inch overall length, this tool delivers aggressive...

Product Description The WALTER-PROTOTYP 5543809 is a solid carbide chamfer mill engineered for precise chamfering operations in metalworking and machining applications. With a 1.5 mm cutter head diameter and 4-flute geometry, this tool delivers clean, accurate chamfer cuts at high feed rates. The TiAlN...

Product DescriptionThe WALTER-PROTOTYP 5603127 is a metric extension tap designed for threading M10 x 1.5 holes in production and maintenance machining environments. Built from powdered metal with a TiCN (Titanium Carbonitride) coating, it delivers improved wear resistance and tool life compared to standard high-speed...

Product DescriptionThe WALTER-PROTOTYP 5603128 is a metric extension tap designed for threading M12 x 1.75 holes in production and toolroom environments. Built from powdered metal with a TiCN coating, it delivers improved wear resistance and surface hardness compared to standard high-speed steel taps. The...

Product Description The WALTER-PROTOTYP 5603129 is a metric extension tap designed for threading M16x2 holes in production and maintenance machining environments. Built from powdered metal with a TiCN (Titanium Carbonitride) coating, this tap delivers improved wear resistance and surface hardness compared to standard HSS...

Product DescriptionThe WALTER-PROTOTYP 5831977 is a carbide end replaceable milling tip designed for use with the ConeFit modular tooling system. It features an E12 connection type for secure, repeatable mounting on compatible ConeFit bodies. The tip is 0.500 inches (12.7 mm) in diameter, has...