devcon

Product DescriptionThe DEVCON 14285 is a replacement mixing nozzle designed for use with two-part adhesive dispensing systems. It attaches to compatible manual guns and static-mixes two-component adhesives as they are dispensed, ensuring a consistent blend ratio at the point of application. At 6 inches...

Product DescriptionThe DEVCON 14300 is a two-part acrylic adhesive plastic welder packaged in a 25 mL Dev-Tube dispenser. It bonds rigid and semi-rigid plastics by chemically fusing surfaces for a durable, load-bearing joint. The straw-colored formula is designed for structural repair and assembly work...

Product DescriptionThe DEVCON 14355 is a two-part structural epoxy adhesive packaged in a 400 mL cartridge with a 1:1 mixing ratio. It delivers a working time of 8 to 12 minutes and reaches fixture in 30 to 35 minutes, with full cure achieved in...

Product Description The DEVCON 14415 is a two-part, room-temperature-cure epoxy adhesive designed for high-performance structural bonding applications. Part of the HP 250 Series, this amber-colored paste adhesive delivers exceptional chemical resistance and mechanical durability once fully cured. It mixes at a 2:1 ratio and...

Product DescriptionThe DEVCON 14415 is a two-part epoxy cartridge adhesive in the HP250 series, formulated for high-performance structural bonding in demanding trade and industrial applications. Packaged in a 400 mL cartridge with a 2:1 mixing ratio, this adhesive delivers a working time of 65...

Product DescriptionThe DEVCON 14630 is a fast-curing, two-part epoxy adhesive and encapsulant designed for professional bonding and potting applications. It is 100% reactive and contains no solvents, producing a light amber cure. With a working time of approximately 5 minutes, it allows for efficient...

Product Description The DEVCON 15250 is a pourable urethane structural adhesive designed for general-purpose bonding applications where flexibility is critical. Sold as a 1 lb can of Flexane 94 Liquid, it ships as a two-component resin and hardener system that is ready to mix...

Product Description Devcon 15260 Flexane 94 Liquid is a castable, nonshrinking low-viscosity urethane compound supplied as a 10 lb kit that cures to a rigid rubber with a hardness of 97 Shore A. Viscosity (uncured) is about 6,000 cP with an open working time...

Product Description Devcon 15330 Flexane High Performance Putty is a two-component urethane putty supplied as a paste for repairs and protective linings. It is packaged as a 1 lb unit and formulated for high tensile strength (4,500 psi) and nominal hardness of 78 Shore...

Product Description The DEVCON 15850 Flexane 80 Putty is a trowelable urethane compound designed to repair and reline process equipment subjected to wear, impact, abrasion, vibration, and cyclical expansion and contraction. It mixes easily and applies smoothly with a trowel, then cures to a...

Product DescriptionThe DEVCON 18245 is an all-purpose household cement adhesive designed to bond a wide range of materials quickly and reliably. Sold in a 1 oz unit, it forms a flexible bond that resists moisture and provides electrical insulation without hardening or becoming brittle...

Product Description The DEVCON 19510 is a ready-to-use liquid metal cleaner formulated to prepare metal surfaces before bonding, coating, or repair work. Part of the Devcon 300 series, it ships in a 1-pint bottle with no mixing or dilution required. With a VOC content...

Product Description The DEVCON 19600 is a clear, silicone-based release agent formulated to prevent adhesion between mold surfaces and cast or formed materials. It applies as a liquid from a standard pint bottle and cures or dries to a clear film, leaving no visible...

Product Description The DEVCON 20445 is a fast-setting, two-part epoxy adhesive packaged in a 0.5 oz flow-mix syringe designed for quick structural bonds on a wide range of surfaces. The flow-mix applicator dispenses pre-mixed epoxy directly from the syringe, reducing waste and eliminating the...

Product DescriptionThe DEVCON 20545 is a fast-setting, two-part epoxy adhesive that cures clear and delivers strong structural bonds in 4 to 7 minutes. Weighing 0.135 pounds per unit, this 1-ounce package is sized for field repairs and service-call use where a quick, reliable bond...

Product Description Devcon 20845 is a two-part epoxy supplied in a 1 oz dual-syringe format that provides a five-minute working/fixture time for bonding, sealing and general repairs. The dual-chamber syringe meters and mixes the components automatically for controlled application. The formulation is designed for...

Product DescriptionThe DEVCON 20945 is a fast-setting, two-part epoxy adhesive formulated for structural bonding and repair work across a wide range of materials. It sets in 4 to 7 minutes and cures to a clear finish, making it well suited for visible repairs where...

Product Description Devcon 21045 is a two-part, rapid-curing epoxy gel supplied in a 1 oz package that provides a five-minute handling time for quick bonding and repairs. The gel formula resists dripping and sagging for vertical and overhead applications and fills gaps effectively. The...

Product DescriptionThe DEVCON 21445 is a fast-setting, two-part epoxy adhesive packaged in a 0.5 oz syringe-style dispenser with a flow-mix nozzle system. The flow-mix applicator delivers pre-mixed epoxy directly to the bonding surface, eliminating the need for separate mixing tools. Cure begins within 60...

Product DescriptionThe DEVCON 22045 is a high-strength plastic bonding adhesive designed to join plastic to plastic, plastic to metal, and metal to metal in a single formulation. It delivers a rated bond strength of 3,500 psi and sets in approximately 15 minutes, making it...