Devcon 14415 Two-part Epoxy Cartridge 400 Ml HP250

Product Description

The DEVCON 14415 is a two-part epoxy cartridge adhesive in the HP250 series, formulated for high-performance structural bonding in demanding trade and industrial applications. Packaged in a 400 mL cartridge with a 2:1 mixing ratio, this adhesive delivers a working time of 65 minutes, giving technicians sufficient open time for complex assemblies. It achieves a lap shear strength of 3,200 psi per ASTM D-1002 and a peel strength of 35 to 40 pli. Full cure is reached in 24 hours. The tan-colored compound is rated for service from -67 degrees F to 250 degrees F, making it suitable for environments with thermal cycling or wide temperature swings.

The DEVCON 14415 is used in mechanical, HVAC, plumbing, and general industrial maintenance applications where a durable, load-bearing adhesive bond is required. Its chemical-resistant and impact-resistant properties make it appropriate for bonding structural components, mounting brackets, and repair work in areas exposed to solvents, vibration, or mechanical stress. Typical installers include maintenance technicians, pipefitters, millwrights, and HVAC service professionals working on metal frameworks, plastic housings, vinyl components, and wood substrates.

Key Features

• 65-minute working time allows extended open time for complex or large-area bonds
• Lap shear strength of 3,200 psi tested to ASTM D-1002
• Peel strength of 35 to 40 pli for resilient, flexible bond performance
• Rated from -67 degrees F to 250 degrees F for thermal cycling environments
• Chemical-resistant and impact-resistant formulation
• Bonds to metal, plastic, vinyl, and wood substrates
• Ready-to-dispense 400 mL cartridge with 2:1 mix ratio

Compatibility

Designed for bonding to metal, plastic, vinyl, and wood substrates across a range of industrial and trade maintenance applications. Part of the DEVCON HP250 series of high-performance epoxy adhesives.

Installation Notes

This adhesive is installed by maintenance technicians, HVAC professionals, and industrial tradespeople using a compatible dual-cartridge dispensing gun sized for 400 mL cartridges with a 2:1 ratio. Surfaces must be clean, dry, and free of oil or oxidation before dispensing. Dispense and discard a small amount of mixed epoxy before applying to the work surface to ensure the two components are fully combined. Allow the full 24-hour cure time before applying load or stress to the bonded assembly.