Devcon 14285 Adhesive Mixing Nozzle 6 Inches

Product Description

The DEVCON 14285 is a replacement mixing nozzle designed for use with two-part adhesive dispensing systems. It attaches to compatible manual guns and static-mixes two-component adhesives as they are dispensed, ensuring a consistent blend ratio at the point of application. At 6 inches in length, it provides adequate reach for most bonding and repair applications. Installation and replacement require no special tools and take only seconds on a properly matched gun. Trade professionals and maintenance technicians working with structural adhesives, epoxies, or repair compounds use these nozzles as single-use consumables that are swapped out between applications or when clogged.

The DEVCON 14285 mixing nozzle is suited for use in maintenance, repair, and operations (MRO) environments, industrial facilities, and field service applications where two-component adhesives are dispensed from a manual cartridge gun. It is a direct-fit consumable for the applications described below. Each package contains one nozzle, making it straightforward to stock multiples for ongoing service needs.

Key Features

• Static mixing design blends two-part adhesive components in a single pass
• 6-inch length provides reach and control during dispensing
• Single-use consumable design prevents cross-contamination between applications
• Compatible with 74001 Manual Gun and ITW Devcon 14280
• Lightweight at 0.04 pounds, adding minimal weight to the dispensing assembly

Compatibility

Designed for use with the 74001 Manual Gun and ITW Devcon 14280 adhesive cartridge system.

Installation Notes

Mixing nozzles for two-part adhesive guns are typically replaced by MRO technicians, maintenance professionals, or trade workers as part of routine adhesive dispensing procedures. Before attaching or removing a nozzle, ensure the cartridge is not under pressure and the gun trigger is locked or released. Thread or snap the nozzle onto the cartridge outlet according to the gun manufacturer's attachment method, and purge a small amount of adhesive before use to confirm complete mixing. Dispose of used nozzles according to local regulations for cured or uncured adhesive waste.