mars

Product Description The MARS mars-80315 is a 60-amp non-fused disconnect switch designed for use in HVAC and related electrical service applications. A non-fused disconnect provides a manual means of isolating electrical equipment from its power source without incorporating an internal fuse element, relying on...

Product Description The MARS mars-83221 is a 20-amp, 2-pole ITE-style circuit breaker designed for use in residential and light commercial electrical panels. It provides overcurrent protection by interrupting the circuit when current exceeds the rated amperage. Licensed electricians install this breaker as a direct...

Product DescriptionThe MARS mars-83222 is a plug-in style circuit breaker rated for 120/240 volts AC and 25 amps across two poles. It is designed to provide overcurrent protection in residential and light commercial electrical panels. The breaker follows the ITE plug-in footprint, making it...

Product Description The MARS mars-83225 is a 40-amp, 2-pole circuit breaker compatible with ITE-style loadcenters, supplied in a box of 50 units. It is designed to provide overcurrent protection in residential and light commercial electrical panels. The double-pole configuration handles 240-volt branch circuits, making...

Product Description The MARS mars-83227 is a plug-in I-T-E style circuit breaker rated for 120/240 VAC operation at 50 amps across 2 poles. It is designed to provide overcurrent protection in residential and light commercial electrical panels, interrupting fault current up to 10,000 kA...

Product Description The MARS mars-83228 is a 60-amp, 2-pole ITE-style circuit breaker designed for use in residential and light commercial electrical panels. It provides overcurrent protection by automatically interrupting the circuit when current exceeds its rated threshold, protecting wiring and connected equipment from damage....

Product Description The MARS mars-83232 is a plug-in style I-T-E circuit breaker rated for 120/240 VAC service at 100 amps across 2 poles. It is designed to provide overcurrent protection in residential and light commercial load centers and panel boards. The breaker carries an...

Product DescriptionThe MARS mars-83321 is a 60-amp, non-fused, 3-pole disconnect switch designed for safe isolation of electrical loads in commercial and industrial applications. Rated up to 600 volts, it provides a reliable means of de-energizing equipment during service, maintenance, or emergency shutoff. The 833...

Product Description The MARS mars-83915 is a Type 1/2 surge protection device rated for 120/240 VAC single-phase systems operating at 50 or 60 Hz. Surge protection devices in this class are installed at the service entrance or distribution panel to clamp transient voltage spikes...

Product Description The MARS mars-83925 is a 60-amp non-fused air conditioning disconnect with a built-in surge protective device (SPD) integrated directly into the pull-out block. Rated at 240 volts, this unit eliminates the need for a separate surge protection module by combining both functions...

Product DescriptionThe MARS mars-84118 is a 1/2-inch liquid-tight non-metallic conduit fitting designed for use in wet or damp electrical installations where moisture ingress must be prevented at conduit connection points. This type of fitting creates a watertight seal between flexible non-metallic conduit and an...

Product Description The MARS mars-84119 is a 3/4-inch non-metallic liquid-tight conduit connector designed to provide a secure, moisture-resistant termination point for liquid-tight flexible non-metallic conduit (LFNC). This fitting seals the conduit entry at junction boxes, enclosures, and equipment knockouts, keeping moisture and contaminants out...

Product Description The MARS mars-84139 is a non-metallic, liquid-tight flexible conduit whip rated for 1/2 inch diameter service at 8 feet in length. It ships pre-assembled with 3 conductors of 10 AWG wire, making it a ready-to-connect solution for final wiring connections on HVAC...

Product DescriptionThe MARS mars-84143 is a non-metallic, liquid-tight flexible conduit whip designed for final connections on HVAC equipment. It provides a moisture-resistant, flexible electrical pathway between a disconnect box and an air conditioning or heat pump unit. The conduit body is non-metallic, making it...

Product Description The MARS mars-85017 is a 3/4-inch liquid-tight connector used to terminate flexible liquid-tight conduit at enclosures, junction boxes, and electrical equipment. It provides a secure, moisture-resistant connection between the conduit end and the knockout opening, maintaining the integrity of the raceway system....

Product Description The MARS mars-85018 is a straight liquid tight non-metallic conduit connector designed for use with 1-inch trade size liquid tight flexible non-metallic conduit. Constructed from PVC, this connector provides a secure, watertight termination point where flexible conduit meets an enclosure, junction box,...

Product DescriptionThe MARS mars-85020 is a non-metallic, liquid-tight 90-degree conduit connector manufactured from PVC. It is designed to terminate liquid-tight flexible non-metallic conduit (LFNC) at junction boxes, equipment enclosures, and panel knockouts where a right-angle entry is required. The 90-degree elbow body reduces stress...

Product Description The MARS mars-85021 is a liquid-tight 3/4 inch 90-degree elbow fitting designed for use in conduit raceway systems where moisture, oil, or coolant exposure is a concern. This elbow provides a protected, watertight bend in flexible liquid-tight conduit runs, maintaining the integrity...

Product Description The MARS mars-85022 is a 1-inch trade size, 90-degree liquid tight non-metallic connector made from PVC. It is designed to terminate liquid tight flexible non-metallic conduit at electrical enclosures, junction boxes, and control panels. The 90-degree angle allows routing conduit runs in...