MUELLER STREAMLINE

Product Description The Mueller Streamline UR3-64 is a brass flare female-to-male adapter that connects 3/8 in. flare fittings to 1/4 in. flare fittings. It includes a copper gasket for sealing and weighs approximately 0.078 lbs. The compact fitting is intended for plumbing, hydronics, and...

Product Description The MUELLER STREAMLINE D5050 is a dehydrated, dead-soft temper copper refrigeration coil designed for HVACR and mechanical refrigeration service applications. Manufactured from C12200 phosphorus deoxidized copper and produced to ASTM B280 standards, this 50-foot coil measures 5/16 inches outer diameter and arrives...

Product Description The MUELLER STREAMLINE D6050 is a dehydrated refrigeration service tube coil designed for HVACR and mechanical refrigeration applications. Manufactured to a consistent dead soft temper, the tubing is bright-finished and thoroughly dried to eliminate moisture contamination — a critical requirement when working...

Product Description The MUELLER STREAMLINE 5KMR8 is a flexible insulated HVAC air distribution duct built for small-diameter branch runs in unconditioned spaces such as attics, crawlspaces, and mechanical rooms. It ships in a 25-foot length at 5 inches in diameter and carries an R-8...

Product DescriptionThe MUELLER STREAMLINE 7KMR6 is a flexible insulated HVAC air distribution duct built for mid-size supply and return branch runs. It features a foil jacket outer wrap with R-6 insulation to reduce heat gain and loss, making it well-suited for applications where energy...

Product DescriptionThe MUELLER STREAMLINE 16KMR6 is a large-diameter foil-jacket flexible duct rated at R-6 insulation, supplied in a 25-foot length. It is built for high-volume air distribution in ducted HVAC systems where flexible routing around structural obstacles is required. The foil outer jacket protects...

Product DescriptionThe MUELLER STREAMLINE w 01047 is a 1-inch rolled stop coupling with a C x C (copper-to-copper) solder joint end configuration, designed for use in pressurized potable water supply systems. Manufactured from wrot copper to meet applicable ASME standards, this fitting delivers consistent,...

Product Description The MUELLER STREAMLINE w 01049 is a wrot copper reducing coupling with a C x C (sweat) connection, sized at 1 inch by 3/4 inch. It is designed for solder-joint assembly in pressurized water supply lines, transitioning pipe from a 1-inch run...

Product DescriptionThe MUELLER STREAMLINE w 02722 is a long-radius 90-degree elbow fitting designed for copper solder-joint (sweat) connections in supply and pressurized plumbing systems. Configured with a C x C (copper by copper) connection on both ends, this fitting accepts standard 1/2-inch copper tube...

Product Description The MUELLER STREAMLINE 14KMR6 is a 14-inch diameter flexible HVAC duct with R-6 insulation and a foil outer jacket, supplied in a 25-foot length. It is designed for larger airflow applications where thermal control and duct efficiency are critical. The R-6 insulation...

Product Description The MUELLER STREAMLINE 10KMR8 is a foil-jacketed flexible insulated duct designed for residential and commercial HVAC air distribution systems. It ships in a 25-foot length with a 10-inch diameter and carries an R-8 insulation value, making it well-suited for runs where minimizing...

Product DescriptionThe MUELLER STREAMLINE 61420350 is a standard refrigerant line set designed for residential and light commercial HVAC installations. It includes a 3/8-inch liquid line and a 7/8-inch suction line, with the suction line wrapped in 1/2-inch black insulation to minimize heat gain and...

Product Description The MUELLER STREAMLINE 6KMR8 is a foil-jacketed flexible duct designed for residential and commercial HVAC air distribution. It measures 6 inches in diameter and comes in a 25-foot length with an R-8 insulation value. The foil outer jacket resists tearing and moisture,...

Product DescriptionThe MUELLER STREAMLINE 8KMR6 is a flexible HVAC duct designed for branch runs and smaller trunk extensions that demand higher insulation performance. Built with R-6 insulation and a foil jacket exterior, this 8-inch diameter duct supports energy efficiency goals in both supply and...

Product Description The MUELLER STREAMLINE 488-007 is a 3/4-inch PVC Schedule 40 run-trap pressure fitting designed for condensate drain line applications in HVAC systems. Manufactured from polyvinyl chloride (PVC), this Schedule 40 fitting meets the wall-thickness and pressure ratings required for standard condensate management...

Product Description The Mueller Streamline 61230500C is a 50 ft standard line set that includes a 3/8 in liquid line, a 3/4 in suction line, and 3/4 in coated elastomeric Duraguard UV insulation. The assembly is made and assembled in the United States, is...

Product Description The MUELLER STREAMLINE w 02728 is a 90-degree long-radius copper elbow designed for sweat-connect (C x C) copper tubing systems. It accepts 3/4-inch copper pipe on both ends and is used to change flow direction with reduced turbulence compared to a standard...

Product Description The MUELLER STREAMLINE 10KMR6 is a flexible insulated HVAC duct designed for residential and light commercial air distribution systems. It features a foil jacket exterior and R-6 insulation to limit heat gain and heat loss across supply and return runs. At 10...

Product DescriptionThe MUELLER STREAMLINE 4KMR6 is a flexible insulated HVAC duct designed for small-diameter branch runs where thermal performance and routing flexibility are both priorities. Built with R-6 insulation and a foil jacket exterior, it reduces heat gain and loss along the duct run...