HALEX

Product Description The HALEX/SCOTT FETZER 14607 is a 3/4 inch Electrical Metallic Tubing (EMT) inside corner pull elbow designed to facilitate pulling conductors through a sharp bend in a conduit run. Constructed from die cast zinc, this fitting is rated for use in dry...

Product Description The HALEX 46213 is a 1-hole cable strap designed to secure service entrance (SE) and service entrance with uninsulated neutral (SEU) cable to structural surfaces. This strap accommodates No. 3 or No. 2 gauge SE or SEU cable and installs with a...

Product Description The HALEX/SCOTT FETZER 99105 is a 1/2 inch electrical metallic tubing (EMT) set screw connector designed for secure, code-compliant conduit terminations. Built from die cast zinc, this connector features an insulated throat that protects wire insulation from abrasion at the point of...

Product Description The HALEX/SCOTT FETZER 04405B is a 1/2 inch screw-in connector designed to terminate flexible metal conduit (FMC) to a knockout opening in a dry location electrical box or enclosure. This fitting threads directly into the knockout without additional hardware, securing the conduit...

Product DescriptionThe HALEX/SCOTT FETZER 2410 is a 1-inch electrical metallic tubing (EMT) compression coupling rated for rain-tight and concrete-tight installations. Constructed from die cast zinc, this coupling joins two lengths of thinwall EMT conduit with a compression-style connection that forms a secure, moisture-resistant seal....

Product Description The HALEX/SCOTT FETZER 26351 is a 1/2 inch rigid compression connector used to join threadless rigid or IMC conduit to a steel outlet box or other metal enclosure. Rated concrete tight, this connector delivers a secure mechanical connection without requiring threaded conduit...

Product Description The HALEX/SCOTT FETZER 91631 is a 1/2 inch watertight zinc conduit hub designed to create a secure, sealed connection between rigid or IMC conduit and a load center or other metal enclosure. Engineered for use at knockouts or slip-fit holes, this hub...

Product Description The HALEX/SCOTT FETZER 8212 is a watertight service entrance cable connector designed to seal and terminate oval-type SE or SEU cable to a threaded entry on a watertight enclosure. Constructed from die cast zinc, this flat-style connector accommodates cables with two insulating...

Product Description The HALEX SCOTT FETZER 4410 is a 1-inch flex screw-in connector designed to terminate flexible metal conduit at a knockout opening in a dry-location box or enclosure. This fitting threads directly into the knockout, securing the conduit end with a screw-type fastening...

Product DescriptionThe HALEX/SCOTT FETZER 22105 is a universal one-hole strap designed to secure conduit, pipe, or cable to walls, studs, joists, and other structural surfaces. This strap fits 1/2 inch conduit or tubing and is sold in a pack of 4. It is a...

Product Description The HALEX/SCOTT FETZER 14405 is a 0.5-inch corner pull elbow designed for use with Electrical Metallic Tubing (EMT) in dry location conduit installations. Constructed from die cast zinc with a set screw connection, this fitting is built to facilitate conductor pulling through...

Product Description The HALEX/SCOTT FETZER 96843 is a zinc plated steel reducing washer sold in a 2-pack, designed to reduce the size of a knockout opening in sheet metal boxes, enclosures, and cabinets. Each washer steps down a 1.25-inch knockout to accept a 1-inch...

Product Description The HALEX/SCOTT FETZER 91530 is a combination coupling designed to connect 1/2 inch electrical metallic tubing (EMT) to 3/8 inch flexible steel conduit in a single fitting. The set screw design provides a secure mechanical connection without the need for special tooling...

Product Description The HALEX/SCOTT FETZER 60222 is a heavy duty porcelain wire holder designed to secure and support electrical wiring along exterior building surfaces, poles, and structural framing. The holder features a galvanized steel saddle with a solid rivet through the head for added...

Product Description The HALEX/SCOTT FETZER 26780 is a conduit hanger with carriage bolt and nut, sold in a 5-pack, designed to secure and suspend conduit from overhead supports. It fits 3/8-inch to 1/2-inch rigid conduit and 1/2-inch electrical metallic tubing (EMT). The slotted carriage...

Product Description The HALEX/SCOTT FETZER 91407 is a stamped steel drive strap designed to secure 3/4-inch electrical metallic tubing (EMT) conduit to wood framing, joists, and studs. The strap is driven into place with a hammer, eliminating the need for screws or anchors in...

Product Description The HALEX/SCOTT FETZER 27259 is a universal plastic snap-in stud bushing designed to protect non-metallic (NM) cable where it passes through metal framing members. Supplied in a 25-pack, each bushing snaps directly into pre-punched openings in metal studs, creating a smooth plastic...