RCD

Product DescriptionThe RCD hk42fz018 is a furnace control board designed to monitor and manage safety-critical functions in residential gas furnace systems. It continuously tracks signals from safety sensors and switches, and initiates an automatic shutdown when a dangerous condition is detected. This board serves...

Product Description The RCD hy10kb300 is a 30-amp, 600-volt melamine fuse designed to protect HVAC circuits from overloads and short-circuit faults. It limits fault current before damage reaches downstream components such as contactors, control boards, and compressors. The melamine body provides thermal stability and...

Product DescriptionThe RCD hd52se124 is an ECM blower motor rated at 1 HP, designed to deliver variable-speed air movement in forced-air HVAC systems. ECM technology allows the motor to modulate speed in response to system demand, reducing energy consumption compared to single-speed PSC motors....

Product Description The RCD hr54za008 is a blower door switch designed for use in HVAC systems where a safety interlock is required to shut down blower or burner operation when the equipment access panel is opened. This type of switch is a mechanical safety...

Product Description The RCD hd44mm130 is a variable-speed ECM-style blower motor with an integrated control module, designed for forced-air HVAC systems. Rated at 1/2 HP and 115 volts single-phase, it operates at a base speed of 1050 RPM with variable-speed capability for precise airflow...

Product Description The RCD hd56fe652 is a three-phase AC induction motor rated at 2.4 horsepower, designed for commercial and industrial HVAC and pump applications. Operating at 208-230/460 volts, 60 Hz, it delivers 1725 RPM output speed, making it suitable for fan, blower, and pump-drive...

Product DescriptionThe RCD p291-4514r is a dual run capacitor designed to stabilize motor performance in residential and light commercial HVAC systems. Rated at 45+10 microfarads (MFD) with a 440-volt AC rating, it maintains proper electrical balance across both the compressor and fan motor circuits...

Product Description The RCD p110-1045 is an OEM-style replacement humidifier pad designed for whole-house bypass and flow-through humidifier systems installed on forced-air HVAC equipment. Measuring 9.5 inches x 10 inches, this evaporator pad allows water to wick across its surface while conditioned air passes...

Product Description The RCD hk06mc058 is a pressure switch designed for use in HVAC systems. Pressure switches are safety and control components that monitor system pressure conditions and open or close an electrical circuit in response to pressure changes. This switch is a direct-replacement...

Product DescriptionThe RCD hc43tq115 is a blower motor designed for use in forced-air HVAC systems. Blower motors drive the indoor air handler fan, moving conditioned air through the duct system and across the heat exchanger or evaporator coil. This motor serves as a direct...

Product Description The RCD lh33zg001 is a hot surface ignitor designed as a direct replacement for gas furnace ignition systems. The ignitor generates the high surface temperature needed to light the burner, replacing the function of a standing pilot and eliminating the unreliability associated...

Product Description The RCD hh18ha507 is an auto-reset high-limit switch rated for a temperature range of 145 to 185 degrees F. It monitors supply air or heat exchanger temperatures inside a forced-air furnace, opening the circuit when temperatures exceed the set threshold and automatically...

Product DescriptionThe RCD p282-0421 is a 2-pole definite-purpose contactor designed to control electrical loads in heat pump systems and residential HVAC equipment. Rated at 25 amps with a 24-volt coil operating at 50/60 Hz, it acts as the primary switching device between the thermostat...

Product DescriptionThe RCD hd46mq134 is an ECM blower motor designed for forced-air HVAC systems requiring consistent, controlled airflow. Rated at 3/4 HP and 1050 RPM, it operates on 115/120 volts at 50/60 Hz in single-phase configurations. The counterclockwise rotation direction is factory-set and must...

Product DescriptionThe RCD zp104kce-tfd-950 is a scroll compressor designed for refrigerant compression in commercial and residential HVAC cooling systems. It operates on 460 volts, 3-phase, 60 Hz power and uses R-410A refrigerant, making it suited for high-capacity split and packaged cooling equipment. Scroll compressors...

Product DescriptionThe RCD la22ja006 is a direct-replacement blower wheel designed for use in residential and light-commercial forced-air HVAC systems. This wheel measures 12 inches in diameter by 12 inches in width with a 1/2-inch bore and turns in a clockwise direction. It moves conditioned...

Product DescriptionThe RCD p291-1004 is a single-section oval run capacitor rated at 10 microfarads (MFD) and 370/440 volts AC, designed as an OEM-style replacement for residential and light commercial HVAC equipment. Run capacitors maintain a continuous phase-shifted current to motor windings, keeping compressor and...

Product Description The RCD hk02za439 is a high pressure switch designed for use in HVAC refrigeration circuits. It monitors system refrigerant pressure and interrupts the control circuit when pressure exceeds a safe operating threshold, protecting compressors and refrigerant-side components from damage caused by abnormal...

Product DescriptionThe RCD hn53cd024 is a 3-pole compressor contactor designed for use in residential and light commercial HVAC systems. It operates on a 24-volt control coil and is rated for 40 amps of load current. Compatible with both 50 Hz and 60 Hz electrical...

Product Description The RCD p257-8728 is a PSC (Permanent Split Capacitor) condenser fan motor designed as an OEM-style replacement for residential and light commercial HVAC condensing units. Operating on 208-230 VAC, this motor runs at 1,075 RPM and drives the condenser fan blade to...