RCD

Product DescriptionThe RCD SEALANT 1 GALLON is a fiber-reinforced, water-borne mastic duct sealant formulated for permanently sealing joints and seams across a wide range of air distribution components. Supplied in a 1-gallon container, this white, flexible compound carries a UL listing and is engineered...

Product Description The RCD zp25lxe-pfv-800 is a scroll compressor designed for residential and light-commercial split-system air conditioning and heat pump applications. Operating on 208/230 volt single-phase power at 60 Hz, it delivers 25,000 BTU/h of cooling capacity using R410A refrigerant. Scroll compressors use two...

Product DescriptionThe RCD 11002015002521 is a brushless DC motor designed for use in HVAC and related mechanical systems. Brushless DC motors eliminate the carbon brushes found in conventional motors, reducing wear and maintenance intervals while delivering consistent torque and speed control. This motor is...

Product DescriptionThe RCD p291-7014r is a dual run capacitor designed for residential and light commercial HVAC systems. It provides the continuous capacitance needed to keep compressor and fan motors running efficiently after startup. Rated at 70/10 MFD with a 370/440V AC dual-voltage design and...

Product Description The RCD p902-39001 is a gel-based odor eliminator formulated for use in HVAC systems. It works by neutralizing airborne odors that circulate through residential and light commercial air handling equipment. The Original Tropical scent provides a fresh, consistent fragrance output over the...

Product DescriptionThe RCD la22ja006 is a direct-replacement blower wheel designed for use in residential and light-commercial forced-air HVAC systems. This wheel measures 12 inches in diameter by 12 inches in width with a 1/2-inch bore and turns in a clockwise direction. It moves conditioned...

Product Description The RCD 12100105a00150 is a propeller fan blade designed for use in HVAC equipment. Propeller fan blades move air across condenser and evaporator coils, maintaining airflow through outdoor and indoor units. This component is installed by licensed HVAC technicians during routine maintenance...

Product Description RCD HH22HA191 is an auto-reset, temperature-actuated switch with a single-pole single-throw (SPST) contact configuration designed for temperature control and safety in HVAC/R systems. The device senses temperature changes and actuates a contact to open or close control circuits, returning to its normal...

Product Description RCD LA01EW034 is a propeller fan blade for HVAC/R blower applications. The 30 in diameter propeller features a 5/8 in bore, 20.5 deg blade pitch, and a three-blade design with clockwise (CW) rotation. The assembly includes a steel hub and is intended...

Product Description The Rcd 319819-203 gasket is a Factory Authorized Parts replacement gasket designed for use with compatible Carrier equipment. It is CSA listed and produced in the USA. The gasket measures 2.9 x 2.3 x 0.5 inches and is supplied as an individual...

Product Description The Rcd LA22RA100 blower wheel is a genuine OEM Carrier replacement part designed for compatible domestic HVAC blower assemblies. The wheel measures 11-1/8 inches in diameter and 7-1/8 inches in width, with a 1/2 inch bore and clockwise (CW) rotation to match...

Product Description RCD KA56GR561 is a motor grommet for HVAC/R furnaces used for motor mounting and vibration isolation. It is identified by vendor part number and item ID KA56GR561 and serves as a replacement part for compatible furnace motor assemblies. The grommet is compatible...

Product Description Rcd 331709-753 is a TXV replacement assembly kit for 5 ton HVAC systems configured for R-22 refrigerant and designed for use with Carrier models CARMP6021ACAABAA and CARMP6024ACAABAA. The kit replaces thermal expansion valve components to service TXV-equipped systems and is supplied as...

Product Description Rcd HB32GQ230 is a 1/12 hp fan motor designed as a direct replacement to meet original equipment specifications. The motor provides an exact drop-in replacement for compatible HVAC applications, maintains agency listings and safety standards, and meets original design life testing. It...

Product Description RCD 20X25X5-1/4-M11 is a media replacement air filter corresponding to the Totaline P102-2025 cartridge filter. It is designed for use in compatible cartridge air cleaner systems and fits 20 x 25 x 5-1/4 installations. Recommended replacement frequency is one to two times...

Product Description The RCD HK06NB017 pressure switch kit (model 355B) is a factory-authorized replacement part intended for HVAC/R controls and pressure switch applications. Sold under vendor part HK06NB017, this Carrier RCD kit supplies the components needed to replace or service the 355B pressure switch...

Product Description The Rcd 17122000051266 is a main board for ductless HVAC systems provided as a direct drop-in replacement that meets original design specifications and agency safety listings. It is designed and tested to meet part design life testing for durability and consistent system...

Product Description RCD 322592-701 is an inducer blower wheel designed as a replacement for single- or two-stage ECM X-13 inducer motors. The part is factory authorized for HVAC/R applications and intended for the domestic market. It serves as a direct replacement wheel to restore...

Product Description The Rcd HN52TC040 is a 2-pole contactor with a 24V control coil and a 40 Amp load rating, used for HVAC repair and replacement applications. The unit measures 2 x 3.25 x 2.5 inches and weighs 0.6 pounds, providing a compact switching...