RCD

Product DescriptionThe RCD hk42fz086 is a replacement control board designed for residential HVAC systems. It manages core electrical functions within a central air conditioning or heat pump unit, coordinating signals between system components to maintain proper operation. Licensed HVAC technicians install and replace this...

Product Description The RCD p251-0083h is a head pressure and low ambient control kit designed for use in residential and light commercial air conditioning and heat pump systems. This control kit regulates head pressure under low ambient temperature conditions, allowing the system to operate...

Product DescriptionThe RCD hd52mm120 is a 1 HP ECM blower motor with an integrated control module, designed as a direct OEM-replacement unit for residential gas furnace and air handler applications. Operating on 115 volts at 50/60 Hz, single phase, the motor delivers variable-speed airflow...

Product DescriptionThe RCD p291-3504r is a single-section run capacitor rated at 35 microfarads (MFD) and 440 volts AC, designed to stabilize motor operation in HVAC equipment. Run capacitors maintain a continuous phase shift in motor windings, allowing the motor to sustain efficient torque during...

Product Description The RCD p461-3708 is a motor pulley designed for use in HVAC blower and air handler assemblies. It features a 4.25-inch outer diameter and a 0.875-inch shaft bore, making it a direct-fit replacement for systems that rely on belt-driven blower motors. This...

Product DescriptionThe RCD ya21k1e-pfv-8a1 is a hermetic refrigerant compressor designed for residential and light-commercial split-system air conditioning applications. It operates on R454B refrigerant, runs at 208-230 volts, 60 Hz, single-phase power, and delivers 21000 BTU/h of cooling capacity. The compressor maintains stable refrigerant compression...

Product DescriptionThe RCD p291-7554r is a dual run capacitor designed to regulate power and provide motor support in residential and light commercial HVAC systems. Rated at 75/5 microfarads (MFD) with a 440-volt AC rating and 50/60 Hz compatibility, this round aluminum capacitor serves both...

Product Description The RCD kh43lg093 is a liquid line filter drier designed to remove moisture and contaminants from the refrigerant circuit in heat pump and air conditioning systems. Sized with a 3/8 inch ODF inlet and a 3/8 inch ODF outlet, it installs in...

Product Description The RCD p461-3505 is a replacement belt-drive pulley designed for use in HVAC air handling and blower applications. With a 4-inch outer diameter and a 5/8-inch bore, this pulley is sized for standard belt-drive blower assemblies found in residential and light commercial...

Product DescriptionThe RCD p110-0050 is a current sensing relay designed for use in HVAC systems where circuits must switch on or off in response to a control signal. Operating at 24 volts and rated for both 50 and 60 Hz applications, this relay serves...

Product DescriptionThe RCD hc52er230 is a direct-drive blower motor rated at 1 horsepower and designed for operation on 208-230 volt single-phase power systems. Running at 1620 RPM with a 48 frame configuration and clockwise rotation, this motor delivers consistent airflow performance in forced-air HVAC...

Product Description The RCD pgapxcar2025-a02 is a germicidal air purifier replacement cartridge designed for residential and light-commercial HVAC air purification systems. Measuring 20 inches x 25 inches x 3 inches, this cartridge slots into compatible whole-home air purifier units to maintain indoor air quality...

Product Description The RCD p291-0774 is a dual run capacitor rated at 7.5+7.5 microfarads (MFD) and 370-440 volts AC, designed to maintain efficient motor operation in residential and light commercial HVAC systems. Run capacitors provide a continuous phase-shifted current to keep compressor and fan...

Product Description The RCD hn51jd026 is a single-pole contactor designed for electrical load switching in residential and light commercial HVAC equipment. It operates on a 24-volt coil rated for 50/60 Hz and handles up to 40 amps full load amperage (FLA) and 50 amps...

Product Description The RCD kr11az406 is a blower pulley designed for use in forced-air HVAC systems. It works with a drive belt to transfer rotational force from the motor to the blower wheel, maintaining correct belt routing and tension within the air handler or...

Product Description The RCD p461-3503 is a motor pulley designed for use in HVAC belt-drive systems. It regulates airflow and system pressure by transferring rotational force from the motor to the blower via a drive belt, allowing the driven component to operate at the...

Product Description The RCD ht680054 is a low-voltage control transformer designed for residential and light commercial HVAC systems. It steps down primary voltage from 120 volts to a 24-volt secondary output, supplying the low-voltage control circuit that drives thermostats, contactors, and control boards. Rated...

Product DescriptionThe RCD p291-7014r is a dual run capacitor designed for residential and light commercial HVAC systems. It provides the continuous capacitance needed to keep compressor and fan motors running efficiently after startup. Rated at 70/10 MFD with a 370/440V AC dual-voltage design and...

Product Description The RCD p902-39001 is a gel-based odor eliminator formulated for use in HVAC systems. It works by neutralizing airborne odors that circulate through residential and light commercial air handling equipment. The Original Tropical scent provides a fresh, consistent fragrance output over the...

Product Description The RCD p291-5574rs is a dual run capacitor designed to support reliable motor starting torque and stable continuous operation in residential and commercial HVAC systems. Rated at 55+7.5 microfarads (MFD) and 440 volts AC, it handles both the compressor and fan motor...