taco

Product DescriptionThe TACO TACO-1615-001SRP is a stainless steel impeller assembly designed for use in hydronic circulation pump systems. The impeller is the rotating component responsible for moving water through the system, and this assembly covers a diameter range of 4.70 to 6.35 inches. Weighing...

Product DescriptionThe TACO TACO-1616D3E20138119 is a stainless steel centrifugal pump rated at 1 horsepower and designed for single-phase operation. It runs on a 115-volt, 60 Hz ODP motor at 1,750 RPM with standard efficiency. The pump features a stainless steel casing, stainless steel impeller,...

Product Description Taco TACO-1634-001RP is a cast iron replacement part for Taco circulator pumps. It is intended for use with Taco models 1620, 1622, 1624, 1630, 1632, 1634, 1635, and 1935, and with Series 1600 and 1900 circulators. The component provides a direct-fit replacement...

Product Description Taco TACO-193-025RP is a replacement motor kit for Taco circulator pumps, listed as OEM part 193-025RP. It fits Taco radiant heat pump applications and is supplied as an individual motor kit. The kit replaces the motor assembly for circulator pump maintenance and...

Product Description Taco TACO-194-1540SF is a stainless steel Freedom Flange Set with flanged x FNPT ends for use with 1-1/4 in pipe. The set includes two flanges, nuts, and bolts and is rated for typical system pressures. It fits circulators 0012-SF4 and 2400-30S/40S and...

Product Description The TACO TACO-2400-003RP Seal Kit is designed for specific sealing applications. This kit, identified as an RP Sealide-C type, provides essential components for maintaining system integrity. It is suitable for replacement or maintenance tasks requiring a reliable seal, ensuring compatibility and performance...

Product Description The TACO TACO-2400-20-3P is a Cast Iron 2400 Series Circulator Pump designed for hydronic heating, chilled water cooling, and hot water recirculation applications. This 1/6 HP pump operates at 115V, 1.9 Amps, and 3450 RPM, providing a maximum flow of 32 GPM...

Product Description The TACO TACO-2400-40-3P is a Cast Iron 2400 Series Circulator Pump designed for efficient operation in medium to high flow/head hydronic heating, chilled water cooling, and hot water recirculation systems. This 1/6 HP pump features a compact, close-coupled design with a durable...

Product Description Taco TACO-2400-60S-3P is a stainless steel 2400 Series circulator pump rated 1/6 HP and 115 V for medium to high flow hydronic heating, chilled water cooling, and hot water recirculation. The close-coupled motor uses permanently lubricated, sealed-for-life bearings and a Noryl impeller;...

Product Description The Taco TACO-431-6 air scoop is a cast iron device that slows water velocity to separate and remove air in hydronic heating or radiant systems. It features engineered internal baffles and threaded FNPT connections for integration with expansion tanks and air vents....

Product Description The TACO TACO-49-125T-1 is a bronze air separator from the 4900 Series, designed to remove entrained air and dirt from closed-loop hydronic heating systems. By continuously purging air from the system, it prevents reduced heat transfer, pipe corrosion, pump cavitation, increased energy...

Product Description The Taco TACO-820-1039RP is a front ball bearing designed as a replacement component for Taco H bearing frame assemblies. Ball bearings in circulator and inline pump frames support the rotor shaft, reduce friction, and maintain alignment under continuous load. This part is...

Product Description The TACO TACO-9300-2774RP is a wire harness, specifically designed as a replacement part for Lochinvar 4-Pin systems. This essential component facilitates electrical connections within compatible heating or water heating equipment. It ensures reliable power and signal transmission, maintaining the operational integrity of...

Product Description The Taco TACO-950-519RP is a lead-free bronze shaft sleeve with an O-ring designed as a direct replacement component for Taco pump rebuild kits. The sleeve has nominal dimensions of 1.000 x 1.125 x 2.650 inches and fits kit numbers 950-664, 950-667, and...

Product Description The Taco TACO-951-2405RP is an end cap bearing for Taco equipment, listed under part number 951-2405RP. The item is marked "END CAP BRNG" and functions as the bearing element for end cap assemblies in compatible Taco mechanical systems. It provides axial and...

Product Description The TACO TACO-951-2491RP is a rear ball bearing designed as a direct replacement component for TACO Series FE pumps. Ball bearings in hydronic circulation pumps support the motor shaft, reduce rotational friction, and allow the pump to maintain consistent flow rates over...

Product Description The Taco TACO-951-3038BRP is a lead free bronze shaft sleeve supplied with an O-ring. The sleeve protects pump shafts and provides a sealing surface for mechanical seals or packing and is referenced for use with Taco service kits. Dimensional specification: 1.750 x...

Product Description Taco TACO-953-2216RP is a replacement ball bearing equivalent to model 6205-2NSEC3. It is supplied as an OEM Taco replacement part with item number 953-2216RP and SKU 953-2216RP. The bearing functions as a direct-fit replacement in compatible pumps, motors, and rotating equipment that...

Product Description The TACO TACO-953-2433RP is a motor coupler half, a critical component in mechanical power transmission systems. This part is engineered to connect a motor shaft to another rotating shaft or driven component, enabling efficient torque transfer. It plays a role in maintaining...

Product Description The TACO TACO-MOT-D-104S is a Pro-Fit replacement motor rated at 1/2 HP and designed for hydronic circulators and inline pump applications. Running on 115/230V single-phase power at 60 Hz, it spins at 1725 RPM with clockwise rotation on a 4-pole configuration. The...