ruud

Product DescriptionThe RUUD 42-106209-01 is a two-stage gas furnace pressure switch assembly designed to monitor and verify inducer draft pressure during furnace operation. This assembly serves as a safety control: it confirms that the draft inducer has established proper negative pressure before allowing the...

Product DescriptionThe RUUD 42-106209-01k is a dual pressure switch assembly used in HVAC systems. This component acts as a safety mechanism by monitoring pressure levels closely. If pressures deviate from the specified limits, it triggers a response to maintain system integrity. Part Number: 42-106209-01k...

Product DescriptionThe RUUD 42-106257-01K is a pressure switch used in gas furnaces. This switch is essential for monitoring air pressure in various Rheem-Ruud gas furnace models. It comes with a mounting bracket that simplifies installation. This component is an OEM (Original Equipment Manufacturer) part,...

Product DescriptionThe RUUD 42-107430-03k is a reliable 2-pole circuit breaker made for electrical safety. This breaker is rated for 60 amps and functions at a voltage of 120/240V. It automatically interrupts electricity flow when an electrical fault occurs. This action not only protects your...

Product Description The RUUD 42-107430-03K is a 120/240V, 60A, 2-pole circuit breaker. This circuit breaker is designed to protect electrical circuits from overloads or short circuits. It is a genuine replacement part for electrical systems. It is suitable for use in various residential and...

Product DescriptionThe RUUD 42-109499-06K contactor operates at twenty-four volts with a current rating of thirty amps and features a single pole. This contactor is suitable for a range of electrical applications, particularly in HVAC systems. It allows for reliable switching in various equipment. The...

Product Description The RUUD 42-109499-10K is a contactor designed for HVAC applications, operating at 24 volts and rated for 40 amps. This single-pole contactor receives low voltage signals from the furnace control board, closing the circuit to facilitate voltage supply to the condensing unit...

Product Description The RUUD 42-21268-04 is a door switch suitable for various appliances such as air conditioners and refrigerators. It is a single pole, single throw, normally open (SPST-NO) switch. When activated by a push button, it provides a reliable connection through a 1/4...

Product Description The RUUD 42-21571-08 is a Single Pole Single Throw (SPST) Relay with a 24 Volt Coil. This relay is used to control electrical loads based on low-voltage control signals in HVAC systems. It closes its contact when energized, allowing current to pass...

Product DescriptionThe RUUD 42-21593-02 is a sequencing relay with a single pole double throw (SPDT) contact design. This relay supports normally open and normally closed options and is intended for flush mount installations using a mounting plate with a hole and tab. It operates...

Product DescriptionThe RUUD 42-22692-06 is a door safety switch suitable for HVAC systems like air conditioners and refrigerators. It is a normally open, single pole, single throw switch, featuring a push-button design. This switch has a mounting hole size of one and one-eighth inches...

Product DescriptionThe RUUD 42-22692-09 is a push button door switch intended for door switch applications. It features a single pole single throw normally open (SPST-NO) switch action which allows for easy operation. The switch is connected using one quarter-inch quick connects, simplifying installation. The...

Product Description The Ruud 42-22692-10 is a genuine OEM replacement door switch, R92 (All). This door switch is used on R92PA0401317MSA/R92PA0601317MSA/R92PA0701317MSA/R92PA0851521MSA/R92PA1001521MSA/R92PA1151524MSA gas furnaces. This switch is essential for the safe and efficient operation of compatible gas furnaces. Genuine OEM replacement part Type: Door Switch...

Product DescriptionThe RUUD 42-23114-06 is a SPDT relay with a 24V coil. This product is used primarily as an electric heater fan relay and is compatible with various Rheem and RUUD models. SPDT (Single Pole Double Throw) Relay Features a 24V coil Designed for...

Product DescriptionThe RUUD 42-23116-06k is a 24V angle bracket sequencer designed for efficient operation in various systems. This component features a 2-pole configuration and DPST-NO switching, making it ideal for timed activation and deactivation processes. 2-pole configuration for reliable performance DPST-NO switching for versatile...

Product DescriptionThe RUUD 42-23116-07 is a sequencing relay used for controlling operational sequences effectively. This relay features a three-pole, TPST-NO contact configuration and is built for reliable performance in various applications. Three-pole, TPST-NO contact configuration Operates on 24V AC with a maximum current of...