SNAPPY

Product DescriptionThe SNAPPY 213-30s is a galvanized set-in cap with cleat designed for rectangular sheet metal ductwork. It fits a 3.25-inch by 10-inch duct opening and provides a secure, finished termination point at the end of a duct run. The integrated cleat allows for...

Product Description The SNAPPY 209-30 is a galvanized sheet metal longway 45-degree stack elbow designed for rectangular duct transitions in residential and light commercial HVAC systems. Measuring 3.25 inches by 10 inches, this fitting redirects airflow at a 45-degree angle along the long dimension...

Product Description The SNAPPY 82-081208 is a galvanized funnel floor register pan designed for residential and light commercial HVAC duct installations. This fitting connects a rectangular duct opening to a floor register, providing a clean transition that directs conditioned air up through the floor...

Product DescriptionThe SNAPPY t7-8 is an 8-inch galvanized adjustable round takeoff fitting designed for sheet metal ductwork systems in residential and light commercial HVAC installations. This fitting connects a round branch duct to a main rectangular or flat-oval trunk duct, allowing airflow to be...

Product Description The SNAPPY 1-07026 is a 26-gauge galvanized sheet metal pipe section used in residential and light commercial HVAC duct systems. Measuring 7 inches in diameter and 2 feet in length, it connects to standard round duct fittings for supply and return air...

Product Description The SNAPPY 65-10 is a 10-inch galvanized crimp cap designed for use in sheet metal duct systems. Fabricated from 26-gauge galvanized steel, this crimped tee cap provides a secure, snug fit over the end of a duct run or branch takeoff. The...

Product Description The SNAPPY 89-12 is a 12-inch galvanized round ductboard tab collar starting takeoff designed for use in low-pressure sheet metal and ductboard duct systems. This fitting connects round flex or rigid duct branches to ductboard trunk lines, providing a secure, airtight starting...

Product Description The SNAPPY 206-32 is a galvanized steel shortway 45-degree stack elbow designed for rectangular HVAC ductwork fabrication and installation. Measuring 3.25 inches by 12 inches, this fitting redirects airflow at a 45-degree angle within low-profile duct runs where a long-radius turn is...

Product DescriptionThe SNAPPY 907249 is a 7-inch, 24-gauge black adjustable 90-degree elbow fitting designed for sheet metal ductwork installations. This fitting allows field adjustment of the elbow angle to accommodate layout variations without cutting or fabricating custom transitions. It is commonly installed in residential...

Product Description The SNAPPY p13-427 is a galvanized steel 90-degree register boot designed for residential and light commercial forced-air duct systems. The fitting transitions a 7-inch round duct collar to a 4 x 12 inch rectangular register face, making a 90-degree turn in the...

Product Description The SNAPPY 2s-2060 is a galvanized steel baseboard short stackhead designed for residential and light commercial HVAC duct systems. It transitions from a 2.25 x 10 inch duct opening to a 6 x 10 inch baseboard register boot, allowing installers to connect...

Product Description The SNAPPY 1-06026 is a 26-gauge galvanized sheet metal pipe section used in residential and light commercial HVAC ductwork systems. Measuring 6 inches in diameter and 2 feet in length, this straight pipe section serves as a standard trunk or branch run...

Product Description The SNAPPY 908242 is a 24-gauge black steel smoke pipe section designed for use in single-wall venting applications on solid-fuel and oil-fired heating appliances. Measuring 8 inches in diameter and 24 inches in length, this pipe section connects appliance flue collars to...

Product Description The SNAPPY p17c-406 is a galvanized steel center end register boot designed to connect round ductwork to a floor, wall, or ceiling register opening. The boot transitions a 6-inch round collar to a 4-inch by 10-inch rectangular register face, making it a...

Product Description The SNAPPY 80-061006 is a galvanized blind floor register pan designed for residential and light commercial HVAC duct systems. It provides a finished transition point at the floor level where a boot connects to a floor register opening. The pan measures 6...

Product DescriptionThe SNAPPY 1-10056 is a 26-gauge galvanized sheet metal pipe section used in residential and light commercial HVAC duct systems. Measuring 10 inches in diameter and 5 feet in length, it provides a rigid, corrosion-resistant airflow passage for supply and return trunk lines....

Product Description The SNAPPY 65-03 is a 3-inch galvanized sheet metal crimp cap designed for use in low-pressure residential and light commercial HVAC duct systems. Fabricated from 26-gauge galvanized steel, this tee cap provides a secure termination point on crimped round duct runs. Its...

Product Description The SNAPPY 82-081008 is a galvanized steel funnel floor register pan designed for use in residential and light commercial HVAC duct systems. This fitting connects supply ductwork to a floor register opening, directing conditioned air from the duct into the occupied space....

Product Description The SNAPPY 200-304 is a galvanized steel wallstack duct section measuring 3.25 inches wide by 10 inches tall by 48 inches long. Wallstack ducts are used to route conditioned air through wall cavities in residential and light commercial HVAC systems, connecting the...

Product DescriptionThe SNAPPY 200-325 is a galvanized steel wallstack duct fitting designed for flat-oval duct runs in residential and light commercial HVAC installations. Measuring 3.25 inches by 12 inches by 60 inches, this five-foot section provides a low-profile solution for routing conditioned air through...