IDEAL INDUSTRIES

Product DescriptionThe IDEAL L-4421 is a replacement blade designed for wire strippers that handle 22 to 10 AWG conductors. The blade provides clean, precise stripping cuts across a wide range of wire gauges commonly found in residential and commercial electrical work. When the cutting...

Product Description The IDEAL 83-9991 is a fully insulated male wire disconnect designed for reliable, tool-free termination in electrical wiring applications. The yellow vinyl insulation sleeve covers the full length of the terminal, protecting against accidental contact and short circuits. Rated for 12-10 AWG...

Product DescriptionThe IDEAL 30-410 is a crimp-style electrical wire ferrule sold in a pack of 100. Ferrules are used to terminate stranded conductors before insertion into terminal blocks, control panels, or equipment with screw-clamp connections. The crimp connection type creates a solid, uniform conductor...

Product Description The IDEAL 34-012 is a fuse puller designed for safe removal and insertion of cartridge-style fuses without direct hand contact. It accommodates fuses ranging from 9/16 inch to 1 inch in diameter, making it suitable for two common cartridge fuse ratings: 60...

Product Description The IDEAL 30-1034 is a 4-port push-in wire connector rated for 18 to 12 AWG conductors, designed for fast, tool-free termination in residential and light commercial electrical work. The yellow housing identifies its AWG range at a glance, helping technicians sort connectors...

Product Description The IDEAL 83-9421 is a female wire disconnect terminal designed for quick, tool-free electrical connections in residential and commercial wiring applications. Rated for 16-14 AWG wire, this slip-on disconnect features silver-colored insulation for straightforward identification during installation and termination work. The terminal...

Product DescriptionThe IDEAL 85-057 is a straight, F-Type coaxial connector designed for terminating RG6 coaxial cable in signal distribution and low-voltage wiring applications. F-Type connectors of this style are used to terminate coaxial runs at devices such as cable boxes, satellite receivers, splitters, amplifiers,...

Product DescriptionThe IDEAL WT41-B is a wing-style twist-on wire connector rated for 600 volts and a maximum operating temperature of 221 degrees F. It features a flame-retardant housing and is designed for making secure, reliable splices in copper conductors. The tan color coding identifies...

Product Description The IDEAL 83-2361 is a partially insulated circular ring terminal designed for crimp-style wire terminations on 12 to 10 AWG conductors. The terminal body measures 1.339 inches long and 0.512 inches wide, with a brass contact plated with titanium nitride (TiN) for...

Product Description The IDEAL 83-9981 is a male wire disconnect terminal designed for quick, tool-free electrical connections in residential and commercial wiring applications. This fully insulated disconnect features a blue vinyl sleeve covering the entire metal barrel, providing reliable insulation protection during and after...

Product DescriptionThe IDEAL 33-866 is a visual wire tracer kit designed for locating and identifying cables in walls, ceilings, and conduit runs without energizing the circuit. The unit uses an LCD display and an amplifier probe with volume control to help technicians trace wire...

Product Description The IDEAL WT4-1 is a standard twist-on wire connector rated for 600 volts and a maximum operating temperature of 221 degrees F. It features a flame-retardant insulating shell in a yellow color coding that identifies it for use with 2 AWG minimum...

Product Description The IDEAL 74-019 is a replacement handle designed for hand conduit benders used in electrical conduit work. Constructed from steel, this handle provides the leverage and durability needed to make clean, accurate bends in 0.5 inch EMT and IMC conduit. It is...

Product DescriptionThe IDEAL 30-171 is a standard twist-on wire connector designed for making secure, insulated splices in copper conductors. The gray, flame-retardant shell handles wires as large as 2 AWG and is rated for 300 volts with a maximum operating temperature of 221 degrees...

Product DescriptionThe IDEAL 83-2351 is a partially insulated circular ring terminal designed for crimp connections on 12 to 10 AWG copper conductors. The terminal body measures 1.167 inches long and 0.512 inches wide, with a 1/4 inch stud size for secure mechanical attachment. The...

Product Description The IDEAL 31-344 is a polyline pulling line rated for a 500-pound breaking strength and spooled to 2,200 feet in length. Pulling line of this type is a standard tool in electrical rough-in work, used to fish wire and cable through conduit...

Product Description The IDEAL 83-2151 is a partially insulated circular ring terminal designed for crimp connections on 22 to 18 AWG conductors. The terminal features a brass contact with TiN (titanium nitride) plating and a red vinyl insulation sleeve that provides partial coverage at...

Product Description The IDEAL 30-144 is a wing-style twist-on wire connector rated for 600 volts and a maximum operating temperature of 221 degrees F. Built with a flame-retardant shell, this connector is designed for making reliable wire-to-wire terminations in electrical panels, junction boxes, and...

Product DescriptionThe IDEAL 45-091 is an automatic wire stripper designed for stripping insulated copper conductors from 18 AWG to 10 AWG. Knife-type blades produce a clean, accurate strip in a single operation, reducing prep time on wiring tasks. The tool measures 7 inches overall...

Product DescriptionThe IDEAL 83-2131 is a partially insulated circular ring terminal designed for secure crimp connections on 22 to 18 AWG copper wire. The red vinyl sleeve identifies it as a 22-to-18 AWG terminal at a glance, following standard color-coding used across trade applications....