DUC-PAC

Product DescriptionThe DUC-PAC 97550 is a 26-gauge round smoke pipe section measuring 7 inches in diameter and 24 inches in length. Built for venting applications in forced-air heating systems, this pipe section connects appliance flue outlets to chimney or vent connectors in residential and...

Product Description DUC-PAC 90530 is a round steel pipe designed for various industrial and commercial applications. This 8-inch diameter, 5-foot long pipe is constructed from 26 gauge steel, ensuring durability and structural integrity for ventilation, exhaust, and general ductwork systems. Its robust material makes...

Product Description The DUC-PAC 90020 is a 90-degree round elbow fabricated for smoke pipe duct systems in forced air heating applications. Formed from 30-gauge sheet metal, this fitting provides a sharp directional change in single-wall smoke pipe runs. At 4 inches in diameter, it...

Product DescriptionThe DUC-PAC DP10020.24.36 is a prefabricated sheet metal plenum section constructed from 26 gauge steel, measuring 20 inches by 24 inches by 36 inches. Plenums serve as the primary air distribution chamber connecting the air handler or furnace to the duct system, directing...

Product DescriptionThe DUC-PAC 97540 is a 26-gauge round smoke pipe section measuring 6 inches in diameter by 24 inches in length. It is used in single-wall venting systems that connect gas-fired or oil-fired appliances to chimneys or vent connectors. The 26-gauge steel construction provides...

Product DescriptionThe DUC-PAC DP1001912.1912.36 is a prefabricated 26-gauge sheet metal plenum section sized at 19.5 inches x 19.5 inches x 36 inches, sold in a pack of 100 units. Plenums form the central air distribution chamber in forced-air HVAC systems, connecting the air handler...

Product Description The DUC-PAC 90520 is a 5-inch diameter, 26-gauge round smoke pipe 90-degree elbow designed for connecting sections of single-wall flue pipe in residential and light commercial heating applications. Fabricated from 26-gauge steel, this elbow provides a rigid, reliable directional change in B-vent...

Product Description The DUC-PAC DP100141316.1578.36 is a prefabricated sheet metal plenum designed for forced-air HVAC systems. Measuring 14-13/16 inches by 15-7/8 inches by 36 inches and fabricated from 26-gauge steel, this plenum provides a rigid, dimensionally consistent transition point between the air handler or...

Product Description The DUC-PAC 180020 is a prefabricated duct panning sheet designed for use in forced air HVAC systems. Measuring 17 inches by 36 inches per sheet, it serves as a return air panning solution typically installed along joist bays to form low-profile return...

Product Description The DUC-PAC 78600 is a 6-inch, 26-gauge round tee fitting designed for smoke pipe and venting applications in forced air heating systems. This tee connects sections of single-wall smoke pipe, allowing branch takeoffs in a venting run. At 26 gauge, the sheet...

Product Description The DUC-PAC DP1001912.2312.36 is a prefabricated sheet metal gauge plenum measuring 19.5 inches by 23.5 inches by 36 inches. Plenums serve as the central air distribution chamber in forced-air HVAC systems, connecting the air handler or furnace to the supply duct network....

Product DescriptionThe DUC-PAC 90540 is a round 90-degree elbow fitting for smoke pipe duct applications in forced-air heating systems. Fabricated from 26-gauge steel, this fitting measures 7 inches in diameter and is designed to redirect flue or exhaust duct runs at a right angle....

Product DescriptionThe DUC-PAC 370105 is a prefabricated sheet metal duct section featuring an S lock connection profile, sized at 60 inches in length. S lock joints are a standard mechanical fastening method used throughout residential and light commercial forced air systems, allowing duct sections...

Product Description The DUC-PAC DP1001612.1912.36 is a prefabricated sheet metal gauge plenum sized at 16.5 inches x 19.5 inches x 36 inches, sold in a quantity of 100 units. Plenums connect the air handler or furnace to the main duct trunk, forming the pressurized...

Product Description The DUC-PAC DP10020.22.36 is a prefabricated sheet metal plenum designed for use in forced-air HVAC systems. Constructed from 26-gauge galvanized steel, this plenum measures 20 inches by 22 inches by 36 inches and serves as a central air distribution chamber connecting the...

Product Description The DUC-PAC 90510 is a round duct elbow with a 4-inch diameter and a 90-degree angle, constructed from 26-gauge galvanized steel. This elbow is designed for use in ductwork systems to facilitate directional changes. It is not a reducing elbow. Features a...

Product DescriptionThe DUC-PAC 97520 is a 26-gauge round smoke pipe section measuring 4 inches in diameter and 2 feet in length, designed for venting applications in forced-air heating systems. Fabricated from steel sheet stock at 26 gauge, this pipe section provides a rigid, durable...