BAPI

Product Description The BAPI BA/2MB is a machined brass thermowell designed for use in HVAC systems, providing a protective housing for immersion sensors. This accessory features a 2.00 inch length, a 1/2 inch NPT external thread for secure installation, and a 1/2 inch NPSM...

Product DescriptionThe BAPI BA/10K-2-H200-R-BW is a room-mount relative humidity transmitter designed for building automation and HVAC control applications. It delivers a 4-20mA analog output signal with 2 percent accuracy, making it suitable for environments where precise humidity monitoring drives comfort and equipment decisions. The...

Product Description The BAPI BA/BBV-COBN is a rough service carbon monoxide sensor designed for demanding environments where standard sensors cannot reliably operate. It communicates readings via BACnet output, making it compatible with modern building automation systems. The sensor monitors CO concentrations across a range...

Product Description The BAPI BA/VOC10-D-BB is a duct-mount volatile organic compound sensor designed to monitor VOC concentrations in HVAC air distribution systems. It outputs a 0 to 10V signal proportional to VOC levels across a measurement range of 0 to 2,000 ppm, giving building...

Product DescriptionThe BAPI BA/H300-D-BB is a duct-mount relative humidity transmitter designed for building automation and HVAC control applications. It delivers an interchangeable analog output of 0 to 5 VDC or 4 to 20 mA, allowing integration with a wide range of building automation systems...

Product Description The BAPI BA/AQX-E is a dual-channel carbon dioxide sensor designed for continuously occupied spaces where reliable CO2 monitoring is essential for indoor air quality (IAQ) management. It outputs a 0 to 5 volt analog signal corresponding to a measurement range of 0...

Product Description The BAPI BA/10K-2-H310-D-BB is a duct-mount combination humidity transmitter and temperature sensor designed for HVAC monitoring and control applications. It delivers a 0 to 10 VDC output signal for humidity with 3% accuracy and uses a 10K Type 2 thermistor for temperature...

Product Description The BAPI BA/H210-RD is a room-mount relative humidity transmitter designed for continuous indoor humidity monitoring and control. It delivers a 0 to 10 VDC output signal with plus or minus 2 percent accuracy, making it suitable for building automation systems, DDC controllers,...

Product Description The BAPI BA/H200-RD is a room-mount relative humidity transmitter designed for building automation and environmental monitoring applications. It delivers 2% accuracy with a selectable output of 0 to 5 VDC or 4 to 20 mA, making it compatible with a wide range...

Product Description The BAPI BA/10K-2-H200-D-BB2 is a combination humidity transmitter and temperature sensor designed for duct-mount installation in commercial and industrial HVAC systems. It pairs a 10K Type 2 thermistor with a 2% accuracy humidity sensing element, delivering dual measurements from a single device....

Product Description The BAPI BA/H200-D-BB is a duct-mount humidity transmitter designed for continuous relative humidity sensing in commercial and industrial HVAC systems. It delivers a selectable analog output of 0 to 5 VDC or 4 to 20 mA, allowing it to integrate with a...

Product Description The BAPI BA/H200-D-BBX is a duct-mount relative humidity transmitter designed for continuous monitoring in HVAC air distribution systems. It delivers 2% accuracy with an interchangeable output selectable between 0 to 5 VDC and 4 to 20 mA, making it compatible with a...

Product Description The BAPI BA/H200-O-BB2 is an outdoor humidity transmitter designed for building automation and HVAC control applications. It delivers a 2% accuracy reading and provides an interchangeable analog output of 0 to 5 VDC or 4 to 20 mA, making it compatible with...

Product Description The BAPI BA/10K-2-H210-O-BB2 is an outdoor air humidity transmitter designed for building automation and HVAC control applications. It outputs a 0 to 10 VDC signal proportional to relative humidity and integrates a 10K Type 2 thermistor for simultaneous temperature sensing. Accuracy is...

Product Description The BAPI BA/10K-2-H300-D-BB2 is a combination humidity and temperature transmitter designed for duct-mount installation in commercial and industrial HVAC systems. It uses a 10K Type 2 thermistor for temperature sensing and delivers humidity readings at 3 percent accuracy. The output is field-selectable...

Product Description The BAPI BA/H200OBB series humidity transmitters are designed for HVAC systems. Room sensors are available in the traditional Delta style enclosure or the new BAPI STAT 4. All Duct Units feature medical-grade closed cell foam to seal the probe insertion hole and...

Product Description The BAPI BA/BBV-CO is a carbon monoxide rough service sensor that offers enhanced electrochemical sensing with accuracy at low concentrations. It features a ventilated BAPI-Box and is suited for parking ramps, equipment rooms, and warehouses. The sensor has a CO range of...

Product Description The BAPI BA/10K-2-H200-O-WP is a ±2% humidity transmitter with an interchangeable output of 0 to 5 V or 4 to 20 mA. It features a 10K-2 thermistor and is designed for outside air applications with a weatherproof enclosure. Ideal for economizer control,...

Product Description The BAPI BA/LLV-20-FC0TO875 outdoor light level sensor conserves energy by allowing lights to be shut off when the ambient light level exceeds a specified level. The sensor can also help ensure safety by allowing lights to be turned on when the ambient...