AIR FLOW PRODUCTS

Product Description The AIR FLOW PRODUCTS 86F14 is a full flow tee fitting designed for duct and air distribution systems. This tee maintains consistent airflow through all three openings, reducing turbulence and pressure drop compared to standard tee configurations. Measuring 14 x 14 x...

Product Description The AIR FLOW PRODUCTS 84DB1514 is a duct board tab takeoff designed for connecting branch ducts to duct board trunk lines. This fitting allows HVAC technicians to create secure, low-leakage branch connections in duct board duct systems. The 84DB1514 measures 14 inches...

Product Description The Air Flow Products RE1412 is a round duct reducer-increaser fitting designed to transition between 14-inch and 12-inch duct diameters in forced-air HVAC systems. This type of fitting is used to step duct size up or down at branch connections, air handler...

Product Description The AIR FLOW PRODUCTS 84ATD-2-16 is an airtight stick-on takeoff with an integrated damper, designed for use with flat duct systems. This fitting allows HVAC technicians to branch supply air from a flat duct run without cutting through the duct wall for...

Product DescriptionThe AIR FLOW PRODUCTS MTD106 is a metal duct conical spin-in takeoff fitting with an integrated damper, sized at 10 x 6 inches. It connects a round main trunk duct to a 6-inch branch run, allowing airflow to be directed and controlled at...

Product Description The AIR FLOW PRODUCTS AVLRIF2424 is a louvered filter return grille with a fiberglass back, sized at 24x24 inches. It is designed to draw return air through the filter media before it re-enters the HVAC system, helping to keep the air handler...

Product Description The AIR FLOW PRODUCTS 77F122320 is a straight transition boot with flange designed to connect square or rectangular ductwork to round collar openings in forced-air HVAC distribution systems. The boot measures 12x23 inches at the rectangular end and features a 20-inch collar....

Product DescriptionThe AIR FLOW PRODUCTS PI04SL is a snap-lock galvanized steel pipe section used in residential and light commercial HVAC duct systems. Fabricated from 30-gauge galvanized steel, this round pipe section measures 4 inches in diameter and 5 feet in length. The snap-lock seam...

Product Description The AIR FLOW PRODUCTS 84DBD204 is a 4-inch duct board tab takeoff fitting with an integrated damper, designed for use in fibrous glass duct board HVAC distribution systems. The tab-style design allows the fitting to lock securely into duct board without requiring...

Product DescriptionThe AIR FLOW PRODUCTS 7741408 is a straight register boot designed to connect ductwork to a floor, wall, or ceiling register opening. It provides a clean, direct transition from round duct to a rectangular register face, maintaining airflow direction without offset. The boot...

Product Description The AIR FLOW PRODUCTS 84AT07 is an airtight stick-on takeoff fitting designed for use with flat duct systems. This fitting provides a sealed branch connection point, allowing conditioned air to be tapped off a flat duct run without cutting into the main...

Product DescriptionThe AIR FLOW PRODUCTS EC04 is a tee end cap designed to terminate or close off the open end of a tee fitting in a duct or piping distribution system. At 4 inches, it provides a clean, sealed closure that prevents airflow bypass...

Product Description The AIR FLOW PRODUCTS 5241207 is a straight ceiling diffuser boot designed to connect sheet metal ductwork to a ceiling diffuser or register in residential and light commercial HVAC systems. The boot transitions airflow from the supply duct branch to the diffuser...

Product Description The AIR FLOW PRODUCTS RE087 is a duct reducer-increaser fitting designed to transition between an 8-inch and a 7-inch round duct section. This type of fitting is used to connect two duct runs of different diameters, maintaining airflow continuity through the transition....

Product Description The AIR FLOW PRODUCTS 77F182020 is a straight transition boot with flange, designed to connect square or rectangular duct openings to round collars in forced-air HVAC systems. The 77F series boot transitions an 18x20 inch rectangular opening down to a 20-inch round...

Product Description The AIR FLOW PRODUCTS 109026 is a 26-gauge sheet metal elbow fitting designed for use in residential and light commercial ductwork systems. This elbow provides a directional change in an air distribution run, redirecting conditioned airflow where straight duct cannot be routed....

Product Description The AIR FLOW PRODUCTS 7341007 is a 90-degree register boot designed to connect supply air ductwork to a floor, wall, or ceiling register opening. This sheet metal boot transitions airflow from the duct run and turns it 90 degrees to direct conditioned...

Product Description The AIR FLOW PRODUCTS RE108 is a round duct reducer-increaser fitting designed to transition between 10-inch and 8-inch duct diameters in forced-air HVAC systems. This type of fitting is used to step duct size up or down along a supply or return...

Product DescriptionThe AIR FLOW PRODUCTS 84DB218 is an 18-inch duct board tab takeoff designed for connecting branch ducts to duct board trunk systems. Tab takeoffs create a secure, low-leakage connection point where a branch run splits from the main duct. This fitting is part...

Product Description The AIR FLOW PRODUCTS 7340805 is a 90-degree register boot designed to transition ductwork to a wall, floor, or ceiling register opening. This fitting connects round or rectangular duct runs to a standard register face and redirects airflow at a right angle...