AIR FLOW PRODUCTS

Product Description The AIR FLOW PRODUCTS PREGRILL2424 is a lay-in perforated grill diffuser designed for use in suspended ceiling T-bar grid systems. It fits a standard 24x24 inch ceiling grid opening and includes R6 insulation, making it suitable for both supply and return air...

Product Description The AIR FLOW PRODUCTS 84RATD10 is an airtight stick-on takeoff fitting designed for 10-inch round ductwork and equipped with a built-in damper. This fitting connects branch runs directly to a main trunk line, allowing the installer to tap into an existing duct...

Product Description The AIR FLOW PRODUCTS 84AT18 is an airtight stick-on takeoff fitting designed for flat duct systems. It provides a secure, sealed branch connection point directly on flat duct without requiring cutting or sheet metal fabrication beyond the takeoff opening. The adhesive-backed design...

Product DescriptionThe AIR FLOW PRODUCTS FB03INS000212224 is an air handler unit filter box insulation panel designed to line or wrap AHU filter box assemblies in forced-air HVAC systems. This insulation component reduces heat transfer and limits condensation on filter box surfaces, helping maintain system...

Product DescriptionThe AIR FLOW PRODUCTS 84ATD05 is an airtight stick-on takeoff fitting with an integrated damper, designed for use with flat duct systems. This fitting allows an HVAC technician to branch airflow from a flat trunk duct to a branch run without cutting into...

Product DescriptionThe AIR FLOW PRODUCTS FB03INS000142224 is an air handler unit filter box insulation panel sized at 14.3125 inches x 22.167 inches x 24 inches. It is designed to line the interior of AHU filter boxes, reducing heat transfer and limiting condensation on cabinet...

Product DescriptionThe AIR FLOW PRODUCTS LT45 is a long-turn 45-degree dryer elbow designed for use in residential and light commercial dryer exhaust systems. This fitting redirects airflow at a gradual 45-degree angle, reducing airflow restriction compared to short-turn alternatives. The long-turn radius helps maintain...

Product Description The AIR FLOW PRODUCTS 7261207 is a center end register boot designed for residential and light commercial duct systems. This 90-degree boot transitions from round or rectangular duct runs to a flat register or grille opening, directing conditioned air into the occupied...

Product DescriptionThe AIR FLOW PRODUCTS 77202320 is a straight transition boot with flange designed to connect square or rectangular ductwork to a round collar in low-pressure residential and light commercial HVAC systems. Built to the 77F configuration, it provides a square-to-round transition measuring 20x23...

Product DescriptionThe AIR FLOW PRODUCTS 86F3 is a full flow tee fitting designed for fluid or air distribution systems requiring a 3-inch by 3-inch by 3-inch configuration. Full flow tees maintain consistent bore diameter through all three ports, minimizing pressure drop and turbulence at...

Product Description The AIR FLOW PRODUCTS 84RAT18 is an airtight stick-on takeoff fitting designed for round duct pipe connections in forced-air HVAC systems. This 18-inch fitting uses an adhesive mounting method that bonds directly to the main duct surface, eliminating the need for sheet...

Product Description The AIR FLOW PRODUCTS 84DBD07 is a duct board tab takeoff fitting with an integrated damper, designed for use in low-pressure residential and light commercial duct systems built from duct board (fibrous glass duct board) panels. The tab-style collar allows the fitting...

Product Description The AIR FLOW PRODUCTS 7361207 is a 90-degree register boot designed to transition ductwork to a floor, wall, or ceiling register opening. This sheet metal fitting connects the supply duct to the register face, redirecting conditioned airflow at a right angle into...

Product DescriptionThe AIR FLOW PRODUCTS 5261006 is a straight ceiling diffuser boot designed to connect ductwork to a ceiling diffuser or register in residential and light commercial HVAC installations. The boot provides a straight-configuration transition from the supply duct to the ceiling opening, directing...

Product Description The AIR FLOW PRODUCTS 5361006 is a ceiling diffuser boot with an integrated rail, designed to connect ductwork to a ceiling diffuser in residential and light commercial HVAC systems. The boot features a 6x10 inch face opening and a 6 inch round...

Product Description The AIR FLOW PRODUCTS 7241006 is a center end register boot designed to transition ductwork to a floor, wall, or ceiling register opening. This 90-degree boot connects a round or rectangular duct run to a 4x10-inch register face, with a 6-inch collar...

Product DescriptionThe AIR FLOW PRODUCTS 7761207 is a straight register boot designed to connect supply air ductwork to a floor, wall, or ceiling register opening. The boot features a 7-inch round collar on the duct end and accepts a 6x12 inch register face opening....

Product Description The AIR FLOW PRODUCTS 84RAT14 is an airtight stick-on takeoff fitting designed for round duct pipe. It provides a branch connection point on a main duct run without the need for cutting or specialized tools beyond standard sheet metal work. The adhesive-backed...

Product DescriptionThe AIR FLOW PRODUCTS 59061006 is a short top insulated boot with flange, designed for use in residential and light commercial HVAC duct systems. This 59F-style boot connects ductwork to floor, wall, or ceiling registers and transitions airflow from the main trunk or...

Product Description The AIR FLOW PRODUCTS 840-3-RATD20-000010 is an airtight stick-on takeoff designed for round duct pipe and equipped with a built-in damper. It provides a direct branch connection from a main round trunk line, with a 2-inch standoff that positions the takeoff away...