RAINDRIP

Product Description The RAINDRIP INC R326CT is a pipe thread tubing adapter designed to connect 1/4 inch drip irrigation tubing to a 3/4 inch male pipe thread fitting. Each adapter includes a washer for a secure, leak-resistant seal. This fitting is a standard component...

Product DescriptionThe RAINDRIP INC R333CT is a 3/4-inch pipe thread swivel by 1/2-inch compression tee fitting designed to connect a threaded pipe fitting to 1/2-inch poly or irrigation tubing at a tee junction. The swivel inlet allows for easy hand-tightening without twisting the supply...

Product Description The RAINDRIP INC R334CT is a swivel tee fitting designed for use with 0.5-inch risers in drip and low-volume irrigation systems. The swivel design allows for easy angle adjustment during installation, reducing stress on tubing connections and simplifying alignment in the field....

Product Description The RAINDRIP INC R337CT is a drip irrigation swivel tee designed to connect drip tubing to a threaded sprinkler riser. It features a 3/4 inch Female Hose Thread (FHT) inlet on one end and a 5/8 inch compression fitting on the other....

Product DescriptionThe RAINDRIP INC R338CT is a 1/4-inch drip line tap-off fitting designed to connect 1/4-inch tubing to the existing 1/2-inch male pipe thread of an underground sprinkler riser. Each unit includes a filter cone to help prevent debris from entering the drip line....

Product Description The RAINDRIP INC R380CT is a pack of 10 support stakes designed to anchor 1/4 inch drip irrigation tubing securely in place. Each stake measures 4 inches in length, providing enough ground penetration to hold tubing flat along garden beds, landscaping borders,...

Product Description The RAINDRIP INC R381CT is a pack of 10 plastic support stakes designed to hold on-line drippers securely in place next to plants in a drip irrigation system. These stakes anchor drip emitters and tubing close to the root zone, keeping drippers...

Product DescriptionThe RAINDRIP INC R382CT is an 8-inch sprinkler support stake designed to hold low-volume sprinklers and sprayers securely in place during irrigation operation. Each stake includes a 4-inch riser, allowing for proper head height positioning in drip and micro-irrigation layouts. Sold in a...

Product Description The RAINDRIP INC R385CB is a galvanized wire stake designed to secure drip irrigation supply lines firmly in place along the soil surface. Constructed from 11 gauge steel with a galvanized finish for corrosion resistance, each stake measures 12 inches in length...

Product Description The RAINDRIP INC R390CT is a pack of 15 support clamps designed to secure 1/4-inch drip irrigation tubing to fixed surfaces. These clamps hold tubing firmly in place along posts, beams, and stucco walls, keeping irrigation lines routed cleanly and preventing sagging...

Product Description The RAINDRIP INC R396CT is a galvanized wire U-shaped support stake designed to secure 0.25-inch drip irrigation tubing at the soil surface next to plants. Each stake is formed from galvanized wire, giving it corrosion resistance in wet soil conditions. At 3.5...

Product Description The RAINDRIP INC R460CB is a pre-set hose pressure regulator designed to reduce incoming water pressure to a consistent 15-20 psi range at a 3/4-inch hose connection. This type of regulator protects drip irrigation emitters, micro-spray heads, and soaker hose systems from...

Product Description The RAINDRIP INC R462CT is a pre-set pipe pressure regulator designed to reduce and stabilize incoming water pressure to a fixed range of 15 to 20 psi. It installs inline on 3/4-inch pipe connections and is built for use in drip irrigation...

Product DescriptionThe RAINDRIP INC R560DP is a complete automatic drip irrigation kit designed to water up to 20 containers or hanging baskets from a single faucet connection. The kit includes a universal faucet timer, supply tubing, drippers, and all necessary fittings to build a...

Product DescriptionThe RAINDRIP INC R567DT is a complete drip irrigation kit designed for watering vegetable gardens. It ships with all the fittings and emitters needed to set up a low-flow drip system at a standard garden hose bib. The kit centers on 25 half-GPH...

Product DescriptionThe RAINDRIP INC R612CT is a 2-pack of 1/4 inch barbed valves designed to adjust, balance, or shut off water flow in low-volume drip and micro-irrigation systems. Each valve connects to 1/4 inch rigid poly risers with an outer diameter range of 0.160...

Product DescriptionThe RAINDRIP INC R616CT is a dual shut off Y connector designed for use in drip irrigation systems. This fitting splits a single supply line into two outlets, with each outlet featuring an independent shut off valve. Technicians and irrigation installers can isolate...

Product Description The RAINDRIP INC R620CT is a 3/4-inch hose-to-hose anti-siphon vacuum breaker designed to prevent backflow and protect potable water supplies from contamination. This type of device installs between a hose bib and a garden hose or irrigation line, breaking any siphon that...

Product Description The RAINDRIP INC R622CT is a 3/4-inch hose and pipe anti-syphon vacuum breaker designed to prevent backflow contamination in irrigation and hose-bib applications. This device protects potable water supplies by stopping siphoning action that could draw non-potable water or chemicals back into...

Product DescriptionThe RAINDRIP INC R630CT is a hole punch tool packaged with hole plugs, designed for use in drip irrigation tubing installation and maintenance. The tool creates clean, uniform holes in poly drip line tubing, allowing technicians to add emitters, barbed fittings, or lateral...