STORM

Product Description The STORM ASVU10Y is a 1-inch brass anti-siphon valve supplied complete with a union connection, designed for irrigation and water supply systems where backflow prevention is required. The anti-siphon design stops contaminated water from flowing back into the potable supply line when...

Product DescriptionThe STORM 2000100 is a mini brass actuator sized at 1 inch, designed for automated valve control in plumbing, HVAC, and fluid management systems. Actuators of this type convert an electrical or mechanical signal into precise valve movement, allowing for remote or automated...

Product DescriptionThe STORM 15046 is a 3/4 inch seat washer designed as a replacement sealing component for compatible valve assemblies. Seat washers create the water-tight seal between the valve stem and seat, preventing flow when the valve is closed. This part is installed by...

Product DescriptionThe STORM BSBV025 is a 0.25-inch threaded brass ball valve rated as lead free, designed for precise on/off flow control in plumbing and HVAC systems. The full-port ball design delivers low pressure drop across the valve seat when fully open, making it well...

Product DescriptionThe STORM ASB07Y is a 3/4-inch brass anti-siphon body designed to prevent backflow and protect potable water supplies from contamination caused by reverse pressure conditions. This fitting serves as the main body component of an anti-siphon valve assembly, excluding the union connection. Constructed...

Product DescriptionThe STORM 16009 is a solenoid frame designed as a structural component within solenoid valve assemblies. The solenoid frame houses and supports the electromagnetic coil and core, maintaining alignment and mechanical integrity during valve operation. This type of component is found in HVAC,...

Product Description The STORM 16215 is a 2-inch diaphragm assembly designed as a replacement component for gas pressure regulators in the 950 Series product line. Diaphragm assemblies serve as the primary pressure-sensing and flow-control element inside a regulator, flexing in response to downstream pressure...

Product Description The STORM 17310 is a repair kit designed to restore proper function to 1.25-inch Superior 950 series fittings or valves. Repair kits like this one contain the internal replacement components needed to bring worn or leaking assemblies back to serviceable condition without...

Product Description The STORM ASBU07Y is a 3/4-inch brass anti-siphon body with union, designed to prevent backflow and protect potable water supplies from contamination caused by backsiphonage. This fitting is installed on irrigation systems, hose bibbs, and outdoor water supply lines where a physical...

Product DescriptionThe STORM 16214 is a diaphragm assembly designed for use in 950 Series gas pressure regulators and control valves. The diaphragm is a critical internal component that responds to pressure differentials to regulate gas flow through the valve body. When the diaphragm wears,...

Product DescriptionThe STORM 600100CH00 is a 1-inch plastic actuator designed for use in fluid control and valve automation applications. Actuators of this type convert a control signal into mechanical motion to open, close, or modulate a valve body. The plastic construction keeps weight low...

Product DescriptionThe STORM ASBU10Y is a 1-inch brass anti-siphon body with union, designed to prevent backflow and protect potable water supplies from contamination caused by back-siphonage. This fitting incorporates a union connection for easier in-line installation and serviceability without cutting pipe. Built from brass...

Product DescriptionThe STORM SPV100 is a 1-inch plastic in-line valve designed for flow control in piped systems. This valve installs directly into a pipeline to start, stop, or regulate fluid flow. Its plastic construction makes it suitable for applications where corrosion resistance or chemical...

Product DescriptionThe STORM 850DIAS100 is a 1-inch brass anti-siphon drip valve designed to prevent backflow and siphoning in irrigation and drip distribution systems. Built from brass construction, this valve provides reliable shutoff and backflow protection at the point of connection, keeping downstream drip lines...

Product Description The STORM 15013 is a stainless steel bleed screw with an O-ring, designed for use with brass valve bodies. Bleed screws serve as manual vent points that allow trapped air or pressure to be relieved from a valve or line without fully...

Product Description The STORM 950100 is a 1-inch threaded electric globe valve designed for precise flow control in hydronic, HVAC, and plumbing systems. Built from brass, this valve features a globe-style body that delivers reliable shutoff and throttling performance. The threaded end connections allow...

Product DescriptionThe STORM 950150 is a 1.5-inch brass ball valve from the 950 Series, designed for reliable flow control in plumbing and mechanical systems. Built from brass construction, this valve delivers durable shutoff performance in a compact, quarter-turn format. The red handle finish provides...

Product Description The STORM 3100100 is a normally open master valve that provides dirty and recycled water protection along with pressure regulation. It features a two-piece upper diaphragm and lower seat assembly that maximizes flow through the valve and protects the diaphragm from harmful...

Product Description The STORM SPV150 is a Superior 1 1/2" SPV100 Series Electric In-Line Plastic Valve. This valve is designed for in-line applications. Product Highlights Electric in-line plastic valve for various applications. Product Information Standard Information Brand: STORM Manufacturer Part Number: SPV150 Technical Specifications...

Product Description The STORM 3100200 is a normally open master valve that provides dirty and recycled water protection along with pressure regulation. It features a two-piece upper diaphragm and lower seat assembly that maximizes flow through the valve and protects the diaphragm from harmful...