MUELLER STREAMLINE

Product Description The MUELLER STREAMLINE ABSBUSHSPFIP2112 is a 2 inch by 1-1/2 inch ABS DWV female flush adapter designed for drain, waste, and vent piping systems. It connects a 2 inch spigot end to a 1-1/2 inch female iron pipe thread, allowing a threaded...

Product Description The MUELLER STREAMLINE PDWVY32 is a PVC DWV 45-degree wye fitting used in drain, waste, and vent piping systems. It connects a 3-inch main line to a 3-inch run and reduces to a 2-inch branch, all through hub connections on each port....

Product Description Mueller Streamline A 04622 is a 45° flare half-union connector that transitions from a 1/4 in SAE flare (A) to a 1/8 in NPTFI (B). The brass fitting has an overall C dimension of 1.03 in, a 9/16 in hex for wrenching,...

Product DescriptionThe MUELLER STREAMLINE DWV45L2 is a 2-inch wrot copper 45-degree elbow configured with cup-by-cup (C x C) connections, designed for drain, waste, and vent (DWV) piping systems. Wrot copper construction delivers consistent wall thickness and clean internal surfaces that support smooth drainage flow....

Product Description The MUELLER STREAMLINE ABSCOUP3112 is an ABS DWV reducing coupling designed to connect drain, waste, and vent piping where a 3-inch line transitions to a 1.5-inch line. The hub-by-hub (H x H) end configuration accepts standard ABS pipe on both ends, allowing...

Product Description The MUELLER STREAMLINE CO90LLT58 is a long-turn 90-degree copper elbow with sweat (C x C) end connections. It changes flow direction by 90 degrees while the extended radius of the long-turn body reduces turbulence and pressure drop compared to a standard short-radius...

Product Description The MUELLER STREAMLINE PDWV4803-3IN is a 3-inch PVC DWV adapter fitting designed to transition between hub and female iron pipe (FIP) threaded connections in drain, waste, and vent piping systems. This fitting accepts a plain pipe end into its socket hub on...

Product Description The Mueller Streamline W 03330 is a product identified by manufacturer part number W 03330 with an available PDF specification sheet. The listing provides document references for technical lookup and product identification; a specification PDF is hosted by Plumbers Supply Co. and...

Product DescriptionThe MUELLER STREAMLINE PDWV4817-2IN is a 2-inch PVC DWV cap used to terminate the end of a drain, waste, and vent pipe run. Molded from PVC, this cap creates a permanent, leak-resistant closure on pipe ends in drainage systems. It solvent-welds directly onto...

Product DescriptionThe MUELLER STREAMLINE DWVPTRAP112 is a 1-1/2 inch cast copper DWV P-trap configured with copper-to-copper (C x C) sweat connections. P-traps in drain-waste-vent systems create a water seal that blocks sewer gases from entering occupied spaces. This fitting is designed for permanent installation...

Product DescriptionThe MUELLER STREAMLINE CORED11212 is a copper reducing coupling designed to connect two copper pipe sections of different diameters using a sweat (solder) connection on both ends. The fitting reduces from 1-1/2 inches on the larger end to 1/2 inch on the smaller...

Product Description The MUELLER STREAMLINE 10056668 is a 2-1/2 inch nominal brass solder union designed for joining copper tubing in plumbing and hydronic systems. This fitting uses a C (solder cup) end style on both connections, allowing a licensed plumber to sweat the union...

Product Description The MUELLER STREAMLINE ABSTRADAPTSPSJ112 is a 1-1/2 inch ABS DWV trap adapter fitting designed to connect a spigot inlet to a slip joint outlet in residential and light commercial drain, waste, and vent systems. This fitting bridges the transition between a fixed...