KREG

Product DescriptionThe KREG KFS-PUCK is a multi-purpose project block designed to support workpieces during cutting, finishing, painting, and assembly tasks. It holds materials elevated off the work surface, giving installers and woodworkers clear access to edges and faces without disturbing wet coatings or freshly...

Product DescriptionThe KREG PRS3100 is a router table switch designed for use with stationary router table setups. It provides a dedicated power control solution that allows operators to start and stop the router motor without reaching under the table or directly toward the spinning...

Product Description The KREG KHI-XLPULL is a cabinet hardware jig designed to speed up and simplify the installation of pulls on cabinet doors and drawer fronts. The jig positions hardware consistently across multiple installations, reducing layout time and the chance of misaligned holes. At...

Product Description The KREG KPHJ320 is a pocket hole jig guide designed for drilling precise, repeatable pocket holes in wood joinery work. The jig functions as a drilling guide, positioning the bit at the correct angle to produce clean pocket holes used in furniture...

Product DescriptionThe KREG PRS250 is a flush trim router bit designed to trim edge banding, laminates, and solid wood flush with a substrate surface. It mounts in a standard router or router table and follows a bearing guide to produce a clean, flat cut...

Product DescriptionThe KREG SPS-F075-100 is a zinc pocket hole screw designed for use with pocket hole joinery systems. This fastener creates strong, reliable wood-to-wood connections when driven into pre-drilled pocket holes. Zinc construction provides corrosion resistance suitable for interior applications. Woodworkers, cabinet installers, and...

Product DescriptionThe KREG SML-C150B-100 is a Blue-Kote pocket hole screw designed for use in woodworking joinery applications where moisture resistance is a priority. These screws feature a corrosion-resistant coating that makes them suitable for projects exposed to occasional moisture or humidity. Pocket hole screws...

Product DescriptionThe KREG SML-C1 - 100 is a zinc pocket hole screw designed for use with pocket hole joinery systems. Zinc coating provides corrosion resistance suited for interior woodworking applications. This fastener is used to join wood pieces through pre-drilled pocket holes, creating strong,...

Product DescriptionThe KREG KPHA308 is a step drill bit designed specifically for use with pocket-hole jig systems. It produces the stepped pocket-hole profile required for pocket-hole joinery, creating a pilot hole and a counterbore in a single pass. The bit is built to work...

Product DescriptionThe KREG KCS-DFMT-PRO is a drawer front mounting system designed to simplify the alignment and attachment of drawer fronts to drawer boxes. The tool holds the drawer front in precise position while fasteners are driven, eliminating the need for a second set of...

Product DescriptionThe KREG SPS-F125 - 100 is a zinc pocket hole screw designed for use with pocket hole joinery systems. Pocket hole screws draw two workpieces together at the joint, pulling the mating surfaces tight as the screw seats. The zinc coating provides basic...

Product Description The KREG KHI-CDIJ is a cabinet door alignment guide designed to simplify the positioning and installation of cabinet doors during finish carpentry and cabinetry work. It provides a repeatable reference point for aligning inset and overlay doors, reducing the need for trial-and-error...

Product DescriptionThe KREG SML-C2B-50 is a Blue-Kote pocket hole screw designed for wood joinery applications where moisture resistance is a priority. Blue-Kote screws feature a specially formulated coating that provides enhanced corrosion resistance compared to standard zinc-coated fasteners, making them well-suited for exterior, treated...

Product DescriptionThe KREG PRS1000 is a corner routing guide set designed to help woodworkers and tradespeople make accurate, repeatable corner cuts with a handheld router. The set provides a stable guiding system that keeps the router bit aligned along inside and outside corners, reducing...

Product DescriptionThe KREG KDG-6000 is a drill guide designed to help trades professionals and skilled DIYers drill accurate, consistent holes at precise angles and depths. Drill guides of this type serve as a portable jig that keeps the bit aligned during handheld drilling operations,...

Product DescriptionThe KREG KT1024-200-25 is a pack of MortiseMate Loose Tenons designed for use in mortise-and-tenon joinery applications. Loose tenons are inserted into routed or chiseled mortises on mating workpieces to create strong, aligned wood joints without the need to cut a traditional integral...

Product DescriptionThe KREG KMA2900 is a multi-purpose layout tool designed for woodworking, cabinetry, and general carpentry tasks. It allows tradespeople and skilled woodworkers to mark, measure, and transfer measurements with consistent accuracy. Built for repetitive layout work, the KMA2900 reduces setup time and minimizes...

Product DescriptionThe KREG PRS500 is a flush trim router bit designed to trim laminates, veneers, and edge banding flush with a substrate surface. It mounts in a standard router or router table and removes excess material cleanly in a single pass. At 0.393 pounds,...