EAGLE CUTTING TOOL

Product Description The EAGLE CUTTING TOOL SDS4350-1562-8-D is an SDS-shank masonry drill bit engineered for rotary hammer applications in concrete, block, brick, and stone. The bit measures 5/32 inch in diameter with an overall length of 8-5/8 inches, making it well suited for deeper...

Product Description The EAGLE CUTTING TOOL SDS4350-3750-24-D is an SDS-shank masonry drill bit designed for rotary hammer drilling into concrete, block, brick, and similar masonry substrates. The bit measures 3/8 inch in diameter with a 24-inch overall length, making it well suited for deep...

Product DescriptionThe EAGLE CUTTING TOOL CHD-3125-18-I is a carbon steel hex rethread die designed to restore damaged or corroded external threads on 5/16 inch-18 NC (National Coarse) fasteners and threaded rod. The hexagonal body allows for easy engagement with a standard wrench or die...

Product DescriptionThe EAGLE CUTTING TOOL MT-022-045-B-I is an M2.2x0.45 high-speed steel (HSS) metric bottom tap designed for threading blind holes to their full depth. As a bottom tap, it produces threads closer to the bottom of a hole than taper or plug taps allow,...

Product DescriptionThe EAGLE CUTTING TOOL HT-15000-6-B-I is a high-speed steel (HSS) hand bottom tap designed for cutting internal threads in through-holes and blind holes where full thread depth to the bottom is required. With a 1-1/2 inch nominal diameter and 6 threads per inch...

Product Description The EAGLE CUTTING TOOL SB-WB.875 is a spade bit designed for boring clean, flat-bottomed holes in wood. With a cutting diameter of 7/8 inches and an overall length of 6 inches, this bit provides the reach needed for drilling through framing members,...

Product Description The EAGLE CUTTING TOOL CHD-8750-14-I is a carbon hex rethread die designed to restore damaged or corroded external threads to their original specification. Sized for 7/8-14 NF (National Fine) thread, this hex-body die fits standard die stocks and hand wrenches, making it...

Product DescriptionThe EAGLE CUTTING TOOL MHD-360-400-I is a carbon steel metric hex die designed to cut external M36.0 x 4.00 threads on bolts, studs, rods, and threaded fasteners. The hex-body profile accepts a standard die stock or wrench for controlled torque application during threading...

Product DescriptionThe EAGLE CUTTING TOOL TFZ-27240-ET is a carbide tipped cutter designed for precision material removal in metalworking and fabrication applications. With a 1-1/4 inch cutting diameter and a 2 inch length of cut, this tool delivers the reach and rigidity needed for demanding...

Product Description The EAGLE CUTTING TOOL NHD-7500-14-I is a carbon steel NPT pipe hex die sized for 3/4-14 threads, used to cut external tapered pipe threads on round stock and pipe ends. The hex body design allows the die to be driven with a...

Product Description The EAGLE CUTTING TOOL TAC40-201-I is a high-speed steel (HSS) jobber-length drill bit manufactured for import distribution. HSS jobber drills are general-purpose cutting tools sized and ground to standard jobber-length proportions, making them suitable for a wide range of hole-drilling operations in...

Product DescriptionThe EAGLE CUTTING TOOL C304-126-D is a No. 26 cobalt jobber-length drill bit manufactured in the USA. Cobalt construction gives the bit superior heat resistance compared to standard high-speed steel, making it suitable for drilling harder materials including stainless steel, cast iron, and...

Product DescriptionThe EAGLE CUTTING TOOL MT-390-400-T-I is a high-speed steel (HSS) metric taper tap designed to cut internal threads in metal workpieces. It is sized for an M39.0 thread diameter with a 4.00 mm pitch, making it suitable for large-diameter threading applications in manufacturing,...

Product DescriptionThe EAGLE CUTTING TOOL D250-209-D is a high-speed steel (HSS) split point drill bit manufactured in the USA. The 135-degree split point geometry reduces walking on contact, allowing the bit to start cleanly without a center punch on most metal surfaces. Designed for...

Product DescriptionThe EAGLE CUTTING TOOL HT-640-T-D is a 6-40 high-speed steel taper tap manufactured in the United States. It is designed to cut internal threads in through-holes and blind holes where the tapered lead angle helps guide the tap into the workpiece for accurate...

Product Description The EAGLE CUTTING TOOL HT-832-T-I is a high-speed steel (HSS) hand taper tap designed to cut 8-32 UNC threads in through-holes and blind holes. Taper taps feature a gradual lead angle across the first several threads, distributing cutting forces progressively and making...

Product Description The EAGLE CUTTING TOOL SDS4350-1875-4-D is an SDS-shank masonry drill bit designed for rotary hammer drilling into concrete, block, brick, and other masonry substrates. The bit measures 3/16 inch in diameter with a 4-5/8 inch overall length (OAL) and features a delta-style...

Product DescriptionThe EAGLE CUTTING TOOL HT-1228-T-D is a 12-28 high-speed steel taper tap manufactured in the USA. This hand tap is used to cut internal threads in metal workpieces, starting the threading process with a gradual taper that makes thread engagement easier. The 12-28...

Product Description The EAGLE CUTTING TOOL CDW-27500-1-1/4-7 is a wet core drill bit designed for cutting precise circular holes through masonry, concrete, and similar hard materials. Measuring 2-3/4 inches in cutting diameter, it uses water during the drilling process to cool the bit and...

Product DescriptionThe EAGLE CUTTING TOOL TFZ-25258-ET is a cobalt universal end mill designed for demanding metal removal applications in professional machine shop and industrial environments. Built from high-speed cobalt steel, this end mill offers improved heat and wear resistance compared to standard high-speed steel...