EAGLE CUTTING TOOL

Product Description The EAGLE CUTTING TOOL SDSM-6250-23-D is a 5/8-inch diameter SDS Max rotary hammer drill bit with a 23-inch working length, manufactured in the USA. SDS Max shank tooling is the standard for heavy-duty rotary hammer applications where high torque and impact energy...

Product DescriptionThe EAGLE CUTTING TOOL C1090-061-I is a 61/64-inch cobalt stub drill bit with a 1/2-inch reduced shank, built for demanding metal drilling applications in industrial and trade environments. The cobalt construction provides heat resistance and edge retention when drilling through hard materials such...

Product DescriptionThe EAGLE CUTTING TOOL DT-3125-24-I is a combination tap and drill tool ground from high-speed steel (HSS) for 5/16-24 NF (National Fine) threaded hole applications. This import-grade combo tool performs the drilling and tapping operation in a single pass, reducing setup time and...

Product DescriptionThe EAGLE CUTTING TOOL HT-836-T-D is a high-speed steel (HSS) taper tap ground to cut 8-36 UNF threads. Taper taps feature a gradual chamfer across the first 8 to 10 threads, distributing cutting load progressively and making thread entry easier in through-holes or...

Product DescriptionThe EAGLE CUTTING TOOL 1090D-047-I is a 47/64-inch split point drill bit with a 1/2-inch shank, finished in a black and gold coating designed for extended tool life and reduced friction during drilling. The split point tip eliminates walking on contact, allowing for...

Product Description The EAGLE CUTTING TOOL MT-270-300-B-I is an M27.0x3.00 high-speed steel (HSS) metric bottom tap designed to cut full threads to the bottom of a blind hole. The bottom tap geometry features minimal chamfer on the leading threads, allowing thread cutting to proceed...

Product Description The EAGLE CUTTING TOOL M100-900-I is a 9mm high-speed steel metric jobber drill designed for general-purpose drilling in metal, wood, plastic, and composite materials. Built to jobber-length standards, this drill provides the reach and rigidity needed for production and maintenance drilling tasks....

Product DescriptionThe EAGLE CUTTING TOOL RBCS-3750-OP is an SDS Plus shank rebar cutter bit designed for cutting through rebar embedded in concrete and masonry. With a 3/8-inch cutting diameter and an 8-inch overall length, this bit fits SDS Plus rotary hammer drills and delivers...

Product Description The EAGLE CUTTING TOOL TFZ-27250-ET is a carbide tipped annular cutter designed for metal fabrication and structural drilling applications. With a 1-9/16 inch cutting diameter and a 2 inch depth of cut, this cutter removes material in a ring pattern rather than...

Product Description The EAGLE CUTTING TOOL CB-SC-1L-D is a single-cut cylindrical radius end carbide burr designed for metal removal, deburring, shaping, and surface finishing in fabrication and maintenance applications. The cylindrical radius end profile allows the tool to work on flat surfaces, contoured edges,...

Product Description The EAGLE CUTTING TOOL HT-6250-18-P-I is a 5/8-18 UNF high-speed steel hand plug tap designed for cutting internal threads by hand in metal workpieces. The plug chamfer — typically 3 to 5 threads of taper — makes it the most versatile tap...

Product Description The EAGLE CUTTING TOOL SDS4350-7500-36-D is an SDS-shank masonry drill bit engineered for rotary hammer applications in concrete, block, brick, and similar masonry substrates. The bit measures 0.75 inches in diameter and 36 inches in length, making it well suited for deep...

Product DescriptionThe EAGLE CUTTING TOOL MT-240-300-T-I is an M24.0x3.00 high-speed steel (HSS) metric taper tap designed for cutting internal threads in metal workpieces. The taper chamfer on the leading threads distributes cutting force gradually, making it well suited for starting threads in through-holes and...

Product DescriptionThe EAGLE CUTTING TOOL TFZ-25288-ET is a cob cutter designed for material removal applications requiring a 2-3/4 inch outer diameter and a 2 inch length of cut (LOC). Cob cutters, also known as corncob or roughing end mills, feature a serrated or wavy...

Product Description The EAGLE CUTTING TOOL CB-SJ-6-D is a carbide rotary burr designed for material removal, deburring, and shaping in metalworking and fabrication applications. This SJ-6 style burr features a 60-degree included angle and is offered in both single cut and double cut configurations,...

Product DescriptionThe EAGLE CUTTING TOOL HT-3750-16-B-D is a 3/8-16 bottoming hand tap ground from high-speed steel (HSS) and manufactured in the USA. Bottoming taps are designed to cut threads to the bottom of a blind hole, making them essential when full thread depth is...

Product DescriptionThe EAGLE CUTTING TOOL TSE500-SP1-I is a Size 1 spiral screw extractor designed to remove broken, stripped, or seized fasteners from metal, wood, and plastic workpieces. The spiral flute design bites into the damaged fastener as it is turned counterclockwise, drawing the extractor...

Product DescriptionThe EAGLE CUTTING TOOL C300-020-D is a 5/16-inch cobalt jobber-length drill bit manufactured in the USA. Cobalt construction provides superior heat resistance and hardness compared to standard high-speed steel, making this bit well-suited for drilling through tough materials such as stainless steel, cast...

Product Description The EAGLE CUTTING TOOL A712-014-I is a high-speed steel (HSS) aircraft extension drill bit designed for drilling in tight or deep-reach applications where a standard-length bit cannot access the work area. With a diameter of 7/32 inches and an overall length (OAL)...

Product Description The EAGLE CUTTING TOOL SDS4350-12500-23-D is a heavy-duty SDS Plus shank rotary hammer drill bit designed for high-impact masonry and concrete drilling applications. With a 1-1/4 inch cutting diameter and an overall length of 23-1/2 inches, this bit handles deep anchor holes,...