EAGLE CUTTING TOOL

Product DescriptionThe EAGLE CUTTING TOOL T500-018-I is a 9/32-inch high-speed steel jobber-length drill bit with a titanium nitride (TiN) coating. The TiN coating increases surface hardness and reduces friction, extending tool life compared to uncoated HSS bits. Jobber-length geometry provides a balanced combination of...

Product Description The EAGLE CUTTING TOOL 1090D-063-I is a 63/64-inch diameter drill bit with a 1/2-inch shank, designed for use in standard drill chucks across a range of drilling applications. The DYNO B G designation indicates a bright-ground finish, which reduces friction and aids...

Product Description The EAGLE CUTTING TOOL TFZ-25292-ET is a cobalt annular cutter designed for cutting clean, accurate holes in steel and other ferrous metals. With a 2.875-inch cutting diameter and a 2-inch depth of cut, this cutter is built for demanding hole-making applications on...

Product Description The EAGLE CUTTING TOOL S304-121-I is a size 21 cobalt jobber-length drill bit built for drilling through hard and abrasion-resistant materials. Cobalt construction gives the bit higher heat resistance than standard high-speed steel, making it suitable for demanding applications where bit temperatures...

Product DescriptionThe EAGLE CUTTING TOOL AC712-028-I is a cobalt aircraft extension drill bit designed for drilling through metal in tight or deep-reach applications. With a 7/16-inch diameter and a 12-inch overall length (OAL), this bit provides the extended reach required for structural and mechanical...

Product Description The EAGLE CUTTING TOOL PT-25000-8-I is a 2-1/2-inch, 8 TPI high-speed steel (HSS) NPT pipe tap designed for cutting tapered pipe threads in ferrous and non-ferrous materials. Built to National Pipe Taper (NPT) standards, this tap produces leak-resistant threaded connections in pipe...

Product DescriptionThe EAGLE CUTTING TOOL SC400-014-I is a 7/32 inch cobalt stub drill designed for drilling through hard metals, stainless steel, and other tough materials where standard high-speed steel bits fall short. The cobalt construction provides increased heat resistance and edge retention, making it...

Product Description The EAGLE CUTTING TOOL HT-6250-11-B-D is a 5/8-11 high-speed steel (HSS) hand bottom tap manufactured in the USA. Bottom taps are ground with minimal chamfer on the leading threads, allowing the tap to cut threads as close to the bottom of a...

Product Description The EAGLE CUTTING TOOL MHD-030-050-I is a carbon steel metric hex die sized for M3.00 threads with a 0.50 mm pitch. Hex dies are held in a die stock handle and turned by hand to cut external threads onto rod, bolt blanks,...

Product DescriptionThe EAGLE CUTTING TOOL TDD50-4036S-ALT-D is a 9/16 inch diameter solid carbide end mill designed for precision metal removal in demanding machining applications. It features a 4-flute geometry with a corner chamfer profile and a single-end configuration. The cutting edges are coated with...

Product DescriptionThe EAGLE CUTTING TOOL 1080-060-D is a 15/16-inch high-speed steel (HSS) slow-spiral drill bit with a 1/2-inch straight shank, manufactured in the USA. Slow-spiral (SD) geometry reduces cutting speed to improve chip evacuation and heat control when drilling softer materials such as wood,...

Product DescriptionThe EAGLE CUTTING TOOL 1090D-104-I is a Dyno-series brad point drill bit designed for clean, accurate boring in wood and wood-composite materials. With a 1-1/16 inch cutting diameter and a 1/2 inch shank, this bit seats securely in standard half-inch chucks on corded...

Product Description The EAGLE CUTTING TOOL MT-160-200-B-I is an M16.0 x 2.00 high-speed steel (HSS) metric bottom tap designed for threading blind holes to their full depth. Bottom taps carry minimal lead threads, allowing the cutting edge to reach the bottom of a hole...

Product Description The EAGLE CUTTING TOOL CDW-40000-1-1/4-7 is a 4 inch wet core drill bit designed for cutting clean, precise holes through concrete, masonry, and similar hard materials. Wet core drilling uses water as a coolant and cutting aid, extending bit life and reducing...

Product Description The EAGLE CUTTING TOOL 1212XL-024-I is a high-speed steel (HSS) long-series drill bit, commonly known as a Longboy, designed for drilling applications that require extended reach beyond the capacity of standard-length bits. With a 3/8 inch diameter and a 12 inch overall...

Product Description The EAGLE CUTTING TOOL S304-107-I is a size 7 cobalt jobber-length drill bit designed for general-purpose drilling in metal and other hard materials. Cobalt construction provides heat resistance and edge retention when cutting through ferrous metals, stainless steel, and other tough workpiece...

Product DescriptionThe EAGLE CUTTING TOOL TFZ-24264-ET is a high-speed steel (HSS) universal cutter designed for milling and profiling operations in metalworking and machining applications. With a 2-inch cutting diameter and a 2-inch length of cut (LOC), this cutter handles a range of material removal...

Product DescriptionThe EAGLE CUTTING TOOL 1080-106-D is a high speed steel (HSS) slow death (SD) drill bit built for professional cutting applications in metal, wood, and composite materials. At 1-3/32 inches in diameter with a 1/2-inch reduced shank, this bit seats securely in standard...

Product Description The EAGLE CUTTING TOOL HT-5000-13-P-I is a 1/2-13 high-speed steel hand plug tap designed for cutting internal threads in metal workpieces. The plug chamfer geometry — typically 3-5 threads of lead — makes this tap suited for through-holes and moderately deep blind...

Product DescriptionThe EAGLE CUTTING TOOL TFZ-25218-ET is a cobalt universal cutter designed for demanding material removal in industrial and trade cutting applications. Built from cobalt high-speed steel, this cutter delivers increased heat and wear resistance compared to standard HSS tooling, making it well suited...