Aqualine

Product DescriptionThe AQUALINE BCA-075 is a 3/4-inch threaded brass cap used to seal and terminate open pipe ends in plumbing, HVAC, and pool or spa systems. Machined from brass, it threads directly onto male-threaded pipe fittings to provide a secure, leak-resistant closure. At 0.21...

Product Description The AQUALINE BBV-125S-LF is a 1-1/4 inch full-port brass ball valve designed for sweat (solder) connections in potable water and plumbing systems. Built to lead-free standards, it meets compliance requirements for installations on drinking water lines where lead content restrictions apply. The...

Product Description The AQUALINE BCA-150 is a threaded brass cap designed to close off 1.5-inch threaded pipe ends in plumbing, HVAC, and pool or spa piping systems. Machined from brass for corrosion resistance and durability, this cap threads directly onto a male-threaded fitting or...

Product DescriptionThe AQUALINE ELS90-125 is a 1-1/4-inch threaded brass street 90-degree elbow designed for directional changes in pressurized piping systems. This fitting accepts a male thread on one end and a female thread on the other, allowing it to thread directly into a tee,...

Product DescriptionThe AQUALINE HXB-1210 is a threaded brass bushing designed to reduce a 1-1/4 inch female threaded port down to a 1 inch male threaded connection. Brass bushings of this type serve as transition fittings in piping systems where pipe sizes change at a...

Product DescriptionThe AQUALINE GVF-075IN is a 3/4-inch FIPT brass inverted garden valve designed for residential and light commercial water supply applications. Built with a brass body and fitted with an oval handle, this valve provides dependable manual shutoff control for outdoor hose bibs, irrigation...

Product DescriptionThe AQUALINE EL90-050 is a 1/2-inch threaded brass 90-degree elbow fitting used to change flow direction in pressurized piping systems. Machined from brass for durability and corrosion resistance, this elbow connects two threaded pipe sections at a right angle. It is a standard...

Product DescriptionThe AQUALINE GELS90-100 is a 1-inch threaded galvanized street 90-degree elbow used to make right-angle direction changes in threaded pipe systems. One end accepts a male-threaded pipe or fitting, while the other end is female-threaded, allowing the elbow to fit directly into another...

Product DescriptionThe AQUALINE GPLUG-300 is a 3-inch threaded galvanized plug used to cap off or seal threaded pipe openings in plumbing, HVAC, and general piping systems. The galvanized steel construction provides corrosion resistance in wet or humid environments. This plug threads directly into a...

Product DescriptionThe AQUALINE BT-200 is a 2-inch threaded brass tee fitting designed for joining three-way pipe connections in pressurized plumbing systems. Built from brass, it offers reliable corrosion resistance and durability in both hot and cold water applications. The threaded ends allow for straightforward...

Product Description The AQUALINE SCU-11-LF is a lead-free brass compression coupling designed to join copper tubing or iron pipe in plumbing and water service applications. Rated for 1-1/2 inch CTS (Copper Tube Size) or 1-1/4 inch IPS (Iron Pipe Size) connections, this fitting delivers...

Product Description The AQUALINE GPN-50-80 is a Schedule 40 galvanized steel pipe nipple sized at 1/2 inch nominal diameter by 8 inches in length. It is used to extend or connect threaded pipe runs in water supply, gas distribution, and general plumbing systems. The...

Product Description The AQUALINE GEL90-250 is a 2.5-inch threaded galvanized 90-degree elbow fitting used to make right-angle direction changes in threaded pipe systems. Constructed with a galvanized finish for corrosion resistance, this elbow is suited for water distribution, mechanical piping, and general plumbing installations....

Product Description The AQUALINE GBV-075F is a threaded brass gas cock designed for manual shutoff service on residential and light commercial gas lines. The quarter-turn valve body is machined from brass for durability and reliable sealing. At 0.75 inches (3/4 inch) threaded connections, it...

Product Description The AQUALINE HXB-1050 is a threaded brass bushing designed to reduce a 1-inch female threaded port down to a 1/2-inch male threaded connection. Brass construction provides corrosion resistance and durability in wet service environments. At 0.26 pounds, this compact fitting is a...

Product Description The AQUALINE EL90-075-CMIPT is a cast brass street 90-degree elbow fitting in a 3/4 inch SxT configuration. This fitting connects a sweat (solder) end directly to a threaded female connection, allowing a 90-degree change in direction without requiring a separate coupling or...

Product DescriptionThe AQUALINE BCP-200 is a 2-inch threaded brass plug designed to seal open pipe ends in plumbing, HVAC, pool, and general mechanical systems. Machined from brass, this plug threads directly into a female-threaded fitting or pipe end to block flow, cap off unused...

Product Description The AQUALINE 319-100 is a 1-inch copper street 45-degree elbow fitting used to change flow direction in copper piping systems. Street fittings accept a male sweat connection on one end and a female sweat socket on the other, eliminating the need for...

Product Description The AQUALINE GHXB-2520 is a threaded galvanized steel bushing used to reduce a 2.5-inch female pipe thread to a 2-inch male pipe thread. This hex bushing provides a rigid, corrosion-resistant connection point in pipe assemblies where a size transition is needed. The...

Product DescriptionThe AQUALINE BT-150 is a 1.5-inch threaded brass tee fitting used to split or combine flow in pressurized piping systems. Constructed from brass, this tee provides reliable performance in plumbing, hydronic heating, and light commercial piping applications. The threaded end connections allow for...