Aqualine

Product Description The AQUALINE GPLUG-150 is a 1.5-inch threaded galvanized plug used to cap or seal threaded pipe openings in plumbing, HVAC, and related mechanical systems. Galvanized steel construction provides corrosion resistance in standard service conditions. The threaded design allows for a secure, leak-resistant...

Product DescriptionThe AQUALINE GPN-150-C is a 1.5-inch close-pattern Schedule 40 galvanized steel nipple used to make threaded pipe connections in water supply, plumbing, and industrial piping systems. The close length means the fitting has no unthreaded center section, allowing two threaded fittings to mate...

Product Description The AQUALINE GPN-150-30 is a Schedule 40 galvanized steel pipe nipple sized at 1.5 inches nominal diameter by 3 inches in length. Galvanized pipe nipples are short threaded pipe sections used to connect fittings, valves, and equipment in water supply, gas distribution,...

Product Description The AQUALINE GPN-50-12 is a Schedule 40 galvanized steel pipe nipple sized at 0.5 inches nominal diameter by 12 inches in length. It delivers a threaded, corrosion-resistant connection point in water supply, gas distribution, and general plumbing systems. The hot-dip galvanized coating...

Product DescriptionThe AQUALINE GEL45-125 is a 1.25-inch threaded galvanized steel 45-degree elbow fitting designed for directional changes in threaded pipe systems. This malleable iron or steel elbow redirects flow at a 45-degree angle, reducing turbulence compared to a sharper 90-degree turn. It is used...

Product Description The AQUALINE GHXB-7514 is a threaded galvanized bushing designed to reduce a 3/4-inch fitting down to a 1/4-inch connection. Galvanized steel construction provides corrosion resistance in wet and exposed piping environments. This type of reducing bushing is a standard fitting used to...

Product Description The AQUALINE GHXB-2010 is a threaded galvanized steel bushing designed to reduce a 2-inch female threaded fitting down to a 1-inch male threaded connection. Galvanized construction provides corrosion resistance for use in wet or exposed service environments. At 0.88 pounds, this bushing...

Product Description The AQUALINE GPN-40-80 is a Schedule 40 galvanized steel pipe nipple measuring 4 inches in diameter by 8 inches in length. It is designed for use in threaded pipe assemblies where corrosion resistance and pressure-rated strength are required. The hot-dip galvanized coating...

Product DescriptionThe AQUALINE GHXB-1275 is a threaded galvanized bushing designed to reduce a 1.25-inch female threaded opening to a 0.75-inch male threaded connection. Galvanized steel construction provides corrosion resistance for use in water supply, irrigation, and general plumbing piping systems. This fitting is a...

Product Description The AQUALINE SS-50Z is a metal hose spike fitting designed to connect a garden hose or supply line to a threaded pipe outlet. It features a 3/4 inch female hose thread (FHT) inlet and a 1/2 inch female iron pipe thread (FIPT)...

Product DescriptionThe AQUALINE GCAP-250 is a 2.5-inch threaded galvanized steel pipe cap used to close off the end of a threaded pipe run in plumbing, irrigation, or industrial piping systems. The galvanized finish provides corrosion resistance, making it suitable for both indoor and outdoor...

Product Description The AQUALINE PBVL-050S is a heavy-duty PVC ball valve designed for reliable manual flow control in piping systems. Built with a solvent weld socket (SxS) connection on both ends, this half-inch valve creates a permanent, leak-resistant joint using standard PVC solvent cement....

Product DescriptionThe AQUALINE GCPLR-1512 is a threaded galvanized bell reducer designed to connect pipes of two different diameters in a single inline fitting. It transitions from a 1.5-inch female thread on the larger end to a 1.25-inch female thread on the smaller end. The...

Product Description The AQUALINE GPN-20-40 is a Schedule 40 galvanized steel pipe nipple sized at 2 inches by 4 inches. Pipe nipples are short threaded pipe sections used to connect two female-threaded fittings or valves in a piping run. The galvanized coating provides corrosion...

Product Description The AQUALINE ELS90-100 is a 1-inch threaded brass street 90-degree elbow designed to redirect flow in pressurized plumbing systems. As a street fitting, one end features a male thread and the other a female thread, allowing it to connect directly to a...

Product DescriptionThe AQUALINE GHXB-3025 is a threaded galvanized steel bushing designed to reduce a 3-inch female threaded connection down to a 2.5-inch male threaded pipe fitting. Galvanized construction provides corrosion resistance in wet and exposed environments. This type of reducing bushing is commonly installed...

Product DescriptionThe AQUALINE BGV-200S is a 2-inch sweat-connection brass gate valve designed for full-flow shutoff in plumbing and hydronic piping systems. Gate valves of this type use a rising-stem wedge design to provide a straight-through flow path with minimal pressure drop when fully open....

Product DescriptionThe AQUALINE FP-CAP15 is a 1.5-inch female national standard thread (FNST) brass cap with attached chain, designed to protect threaded hose connections from debris, damage, and unauthorized use. The cap threads onto standard FNST fittings and is commonly installed on pool and spa...

Product DescriptionThe AQUALINE BT-125 is a 1-1/4-inch threaded brass tee fitting used to create branch connections in pressurized piping systems. Machined from brass, this tee provides three threaded ports in a standard tee configuration, allowing a single supply line to split or a branch...