potter

Product DescriptionThe POTTER ELECTRIC SIGNAL CO. US 1000137-1 (CR-135C-MP) is a closed position heat detector designed to sense elevated temperatures in protected spaces and trigger an alarm response. This thermal detector is a fixed-temperature device that activates when the surrounding air reaches its rated...

Product Description Potter 1000143 is a CF-200W fixed indoor heat detector that actuates at 200°F for conventional fire detection. It features a low-profile white plastic housing and is available in open or closed contact configurations and in single- or multiple-circuit versions. Contact ratings are...

Product Description The POTTER 1010-000 is a reflective long range prism kit designed for beam-type smoke detection systems. It enables detection over distances up to 394 feet (120 meters) by reflecting the projected beam back to the detector head, allowing a single-ended installation where...

Product Description The POTTER 1019200 is a standard power cord and plug assembly designed to supply power to compatible supervisory switch equipment. Measuring 16 feet in length, this assembly provides a ready-to-use connection between a power source and the supported device. It is built...

Product Description Potter 1144408 is a VSR-8 vane-type waterflow switch for wet sprinkler systems that detects flow with an 8-inch vane and provides electrical signaling via two SPDT snap-action switches. The unit includes an adjustable pneumatic retard, a NEMA 4 / IP54 die-cast enclosure,...

Product Description The POTTER ELECTRIC SIGNAL CO. US 1430271 (DH-1224-RPC) is a duct smoke detector housing designed for use in fire detection and alarm systems. This housing assembly provides a protective enclosure for a duct-mounted smoke sensing head, allowing it to sample airflow within...

Product Description The POTTER ELECTRIC SIGNAL CO. US 1430504/FSEX-24PMA-MOD is an explosion proof strobe designed for use in hazardous-location notification systems operating at 24 volts DC. Built to function safely in environments where flammable gases, vapors, or combustible dust may be present, this strobe...

Product Description Potter 2020441 is a high security contact supplied as a wired contact sensor with a 3 ft cord. The device provides a hardwired contact interface for security systems and includes a product data sheet for detailed specifications. It is recorded under JMAC...

Product Description The POTTER 4050-001T-201 is a single action manual pull station designed for use in fire alarm systems. It provides a straightforward means for building occupants to manually trigger a fire alarm signal with a single downward pull motion. This device is a...

Product Description The POTTER 4871170 is a weatherproof horn strobe from the PE Series, designed for fire alarm notification in commercial and light industrial environments. It features an LED-based strobe with a clear lens and white housing, with FIRE lettering visible on the unit....

Product Description The POTTER ELECTRIC SIGNAL CO. US AFC-1000V is an integrated voice evacuation system designed for life-safety applications in commercial and institutional buildings. It combines fire alarm signaling with intelligible voice messaging to direct occupants during emergency conditions. Licensed fire alarm technicians and...

Product Description Potter AMS-38BW is a mechanical surface-mount magnetic contact by Potter Electric Signal (MPN AMS-38BW) used for door and window security and closed-loop burglar alarm systems. The device is AC rated, supports DC power, and provides a 5/8" (0.6") operating gap with an...

Product Description The Potter CA2Z is a Class A initiating module that converts two Class B initiating device circuits into two Class A circuits for use with the PFC-4410RC fire control releasing panel. The PCB assembly mounts in the upper right-hand corner of the...

Product Description The Potter CF-200-MP is a fixed-temperature THERMOFLEX single-circuit heat detector that activates at 200F (93C). It features a metal alloy casing with factory-installed pigtail leads sealed through a corrosion-resistant mounting plate for moisture protection and interfaces with most fire alarm control panels....

Product Description The POTTER CHS-24RR-WP is a wall-mount combination horn and strobe unit with a red lens, designed for fire alarm and life safety notification systems. It delivers both audible and visible alert signals simultaneously, making it suitable for commercial and industrial environments where...

Product Description The Potter CS-24W is a ceiling-mounted selectable-candela fire alarm strobe designed for nominal 24 VDC operation. It provides tamperproof field-selectable candela settings (15, 30, 75, 95, 115, 150 cd), a minimum 1 Hz flash rate, and measured current draw values at 24...

Product Description Potter CSS-10 is the Coilkeeper supervisory switch that monitors the position and condition of a solenoid coil for preaction and deluge fire systems as required by NFPA 13 (8.3.1.2.1). The unit determines whether the coil is installed on the valve stem, detects...