Potter 4050-001T-201 Single Action Manual Pull Station

Product Description

The POTTER 4050-001T-201 is a single action manual pull station designed for use in fire alarm systems. It provides a straightforward means for building occupants to manually trigger a fire alarm signal with a single downward pull motion. This device is a standard component in commercial and residential fire alarm installations, typically wired into the building's fire alarm control panel. Licensed fire alarm technicians and electricians install and commission this device as part of a code-compliant fire detection and notification system.

This pull station is suited for commercial buildings, schools, healthcare facilities, and other occupancies where manual fire alarm initiation points are required by code. It is installed at accessible locations throughout a facility, typically at exit doors and along egress paths, per applicable fire codes. The single action design means only one motion is required to activate the alarm, making it simple to operate during an emergency.

Key Features

• Single action operation requires only one pull motion to initiate alarm signal
• Manual pull station provides a dedicated human-initiated fire alarm trigger point
• Designed for integration into standard fire alarm control panel wiring
• Suitable for wall-mount installation at code-required initiating device locations

Compatibility

Designed as an OEM-style replacement or new-installation manual pull station for use in single action fire alarm initiating device applications.

Installation Notes

Installation must be performed by a licensed fire alarm technician or electrician in accordance with NFPA 72 and applicable local fire codes. De-energize the fire alarm control panel circuit before making wiring connections. Pull stations are typically mounted at 48 inches above finished floor per ADA and code guidelines. Always verify system compatibility and perform a full system test after installation.