allen-bradley

Product Description The ALLEN BRADLEY 509DOD is a three-pole, non-reversing across-the-line motor starter rated for 90 amps at 120 volts (60 Hz) and 110 volts (50 Hz). Built to NEMA Size 3 specifications, it uses an open-type, non-combustible enclosure design suited for panel or...

Product Description The ALLEN BRADLEY 700HF32A134 is a general purpose AC-operated relay designed for industrial control applications. Part of the 700-HF model series, it features a double-pole double-throw (DPDT) contact configuration with silver cadmium oxide contacts for reliable switching performance. The relay supports quick...

Product Description The ALLEN BRADLEY 700HR52TA17 is a tube base dial timing relay designed for industrial control applications requiring precise, adjustable time delay switching. This relay operates on 100-240 volts AC at 50/60 Hz or 100-125 volts DC, making it compatible with a wide...

Product DescriptionThe Allen Bradley 700HT22AU120 is a tube base timing relay designed for industrial control applications requiring precise off-delay timing. Rated for 120 volts AC/DC operation, it features a double-pole double-throw (DPDT) contact arrangement that provides two switched circuits in a single device. The...

Product DescriptionThe ALLEN BRADLEY 800H-JP2KB7AXXX is a 3-position manual selector switch designed for industrial control panel applications. Built to the 800H series specification with Type 7-N-9 ratings, this unit features a standard maintained-knob operator with KB7 cam action. The switch ships with 1 normally...

Product Description The ALLEN BRADLEY 800H1HVX7 is a push button enclosure base designed for use with 800H series push button operators in hazardous-duty industrial environments. This 1-gang deep enclosure base features a 3/4-inch dead-end conduit entry and is rated Type 7 and Type 9,...

Product Description The ALLEN BRADLEY 800H2HA7 is a hazardous-location push button station designed for industrial control applications requiring reliable operator interface in classified environments. This unit features two momentary-contact push buttons with a lever-type actuator, factory-marked with Green START and Red STOP legends. The...

Product Description The ALLEN BRADLEY 800H2HAM7 is a Type 7-N-9 push button station designed for industrial control applications in hazardous environments. It features a lever-type actuator and a two-position selector switch with maintained contacts. The station is factory-marked with Green START and Red STOP...

Product Description The ALLEN BRADLEY 800HBP6 is an extended head push button operator from the 800H series, designed for industrial control panel applications. This unit ships without a contact block, making it suitable for installations where the operator head and legend plate are sourced...

Product Description The ALLEN BRADLEY 800HFPX6D4 is a heavy-duty push-pull push button operator designed for industrial control panel applications. This unit features a red mushroom head actuator and operates in a 2-position push-pull configuration, making it well suited for machine control, emergency stop circuits,...

Product Description The ALLEN BRADLEY 800HN5H is a protective boot designed for 30mm non-illuminated push buttons. Made from chlorosulfonated polyethylene (Hypalon), this boot provides a sealed, durable cover that shields push button operator heads from contamination, moisture, and mechanical wear. It is installed over...

Product Description The ALLEN BRADLEY 800HNP15 is a pushbutton enclosure cover designed for use with the 800H series pushbutton station. It features a double lever momentary actuator configuration and is rated for Type 7 and Type 9 enclosures, making it suitable for hazardous location...

Product DescriptionThe ALLEN BRADLEY 800HNP31 is a two-hole pushbutton cover designed for use with NEMA Type 7 and NEMA Type 9 enclosures. This cover provides a protective interface layer for operator control stations in hazardous-location environments where flammable gases or combustible dust may be...

Product DescriptionThe ALLEN BRADLEY 800HNP33 is a pushbutton enclosure cover designed for use with 800H series pushbutton stations in hazardous location installations. This two-hole special cover is rated for Type 7 and Type 9 enclosures, making it suitable for environments classified as Class I,...

Product DescriptionThe ALLEN BRADLEY 800HUP13 is a single-turn potentiometer rated at 1000 ohms (1 KOhm) resistance, designed for use in industrial control panel applications. Part of the 800H pushbutton series, this component fits a standard barrel length and is rated for Class I Division...

Product DescriptionThe ALLEN BRADLEY 800R1HZ4 is a 30mm push button station housed in a stainless steel enclosure rated for NEMA Type 4, 4X, and 13 environments. It features a single-hole mounting configuration and is designed for use in Class I Division 2 hazardous locations....

Product Description The ALLEN BRADLEY CC236 is a replacement contactor coil designed for use in NEMA-rated electromechanical contactors. Operating at 115-120 volts, 60 Hz, this coil energizes the contactor's electromagnetic core, pulling in the armature to close power contacts and complete the load circuit....

Product DescriptionThe ALLEN BRADLEY CD236 is a replacement contactor coil rated for 120 volts at 60 Hz (110 volts at 50 Hz), designed for use with NEMA Bulletin 500 Line contactors. It fits NEMA Size 3 contactor frames and provides the electromagnetic drive needed...

Product Description The Allen-Bradley 100-C12B10 is a 3-pole IEC contactor rated for motor loads with a 12 A rated operating current and a coil rated 440 V 50 Hz / 480 V 60 Hz AC. It provides three normally open power poles and one...