Allen Bradley 800H2HAM7 Push Button Station Class I Div 1

Product Description

The ALLEN BRADLEY 800H2HAM7 is a Type 7-N-9 push button station designed for industrial control applications in hazardous environments. It features a lever-type actuator and a two-position selector switch with maintained contacts. The station is factory-marked with Green START and Red STOP legends, making it ready for direct panel installation without additional labeling. This unit is rated for Class I Division 1 locations, making it suitable for areas with flammable gases or vapors under normal operating conditions. Licensed electricians and industrial control technicians are the typical installers for this type of device.

This push button station is intended for use in Class I Division 1 hazardous locations, including industrial facilities such as refineries, chemical processing plants, and other environments where flammable gas or vapor concentrations may be present during normal operations. The maintained-contact, two-position selector switch configuration suits applications requiring a latching START and STOP control scheme. The Type 7-N-9 enclosure classification confirms suitability for both explosion-proof and dust-ignitionproof environments where applicable.

Key Features

• Type 7-N-9 enclosure rating for Class I Division 1 hazardous locations
• Lever-type actuator for positive, tactile selector operation
• Two-position selector switch with maintained contacts
• Factory-applied Green START and Red STOP legend markings
• Designed for direct panel or enclosure surface mounting in industrial control circuits

Compatibility

Designed as an OEM-style replacement or new-installation component for 800H series push button station assemblies used in hazardous-location industrial control panels.

Installation Notes

Installation should be performed by a licensed electrician familiar with NEC Article 500 requirements for Class I Division 1 locations. De-energize and lockout the control circuit completely before servicing or wiring the station. Verify that all conduit seals and fittings are rated for the hazardous location classification before completing the installation. Do not modify the enclosure or actuator assembly, as doing so may void the hazardous location rating.