nVent

Product Description NVENT RPSE1H57 CADDY PYRAMID EZ Rubber-Based Support is designed for 1 inch rigid conduit with an outer diameter of 1.315 inches. It offers a height adjustment range of 5 to 7 inches and supports a maximum load of 170 lbs. Made from...

Product DescriptionThe NVENT RRH592Q Cable to Rebar Mold Copper 115 Weld is designed for reliable connections in grounding applications. This mold produces a low resistance connection that adheres molecularly to ensure enduring performance. Forms a permanent, low resistance connection Requires no external power for...

Product Description The NVENT RVJ1008HW is a fiberglass reinforced plastic (FRP) electrical junction box built for highly corrosive environments where standard metal enclosures would fail. Part of the RVJ series, it features a raised opaque cover with a stainless steel continuous hinge and stainless...

Product Description The NVENT RVJ1008HWPL1 is a NEMA 4X rated fiberglass (FRP) electrical junction box enclosure with a raised opaque hinged cover, designed for use in highly corrosive environments. It measures 11.32 inches high by 9.32 inches wide by 5.43 inches deep and weighs...

Product Description Nvent RVJ1412HWPL2 is a RVJ raised opaque cover fiberglass reinforced polyester (FRP) enclosure for electrical junctions in corrosive environments, listed to UL 508A and rated NEMA 4X with IEC IP66. The hot-compression molded FRP body includes a polyurethane foam-in-place gasket, molded mounting...

Product DescriptionThe NVENT RVJ1614HWPL2 is a fiberglass reinforced polyester (FRP) junction box enclosure from the Hoffman RVJ Series, rated NEMA 3, 3R, 4, 4X, 12, and 13. It features a raised opaque cover secured on one side by two stainless steel padlockable latches and...

Product Description The NVENT RVJ1816HW is a fiberglass junction box enclosure designed for electrical protection in highly corrosive and demanding environments. It features a raised polyester cover secured by a steel hinge and two corner screws, providing reliable access while maintaining enclosure integrity. The...

Product Description The NVENT SC2D CADDY Cable Snap Clip is designed for electrical, datacom, and low voltage applications. It is suitable for use with MC/AC cable and conduit, featuring a flange size of 1/16 to 3/16 inches and an outside diameter of 0.472 to...

Product DescriptionnVent CADDY SC4D is a cable snap clip designed for use with cables having an outer diameter ranging from zero point four seventy-two to zero point five fifty-one inches. This clip is compatible with flanges measuring from three sixteenths to nine thirty-seconds inches....

Product Description The NVENT SC8D Cable Snap Clip is designed for securing MC/AC cable and conduit. This spring steel clip features a Caddy Armor finish and is suitable for outside diameters of 0.472 to 0.551 inches. It attaches to flanges ranging from 5/16 to...

Product Description The NVENT SCH12 is a 1-piece strut clamp designed for securing 1/2 inch and 3/4 inch conduit. It accommodates an outside diameter of 0.57 to 0.92 inches and has a load capacity of 200 lb. Constructed from electro-galvanized steel, this channel-mount clamp...

Product Description The NVENT SCH12B is a single-piece strut clamp designed for cable and conduit applications. This clamp fits into the open side of a strut channel and requires only a screwdriver or nutdriver for installation. It is used for 3/4" EMT and 1/2"...

Product Description The NVENT SCH16B is a strut clamp designed for cable and conduit support. This one-piece clamp fits into the open side of a strut channel and requires only a screwdriver or nut driver for installation. It supports outer diameters from 0.72" to...

Product Description The NVENT SCH20B is a strut clamp designed for cable and conduit applications. This one-piece clamp features a protective boot and fits into the open side of a strut channel. Installation requires only a screwdriver or nutdriver, eliminating the need for screws...

Product Description The NVENT SCH24B is a single-piece strut clamp designed to fasten pipe, conduit, or cable directly to strut channel without loose hardware. The self-contained design keeps all fastening components integrated, eliminating the risk of dropped or misplaced parts during installation. A protective...

Product Description The NVENT SCH32B is a strut clamp designed for cable and conduit support. This one-piece clamp fits into the open side of a strut channel and requires only a screwdriver or nutdriver for installation. It is made of steel with an electrogalvanized...

Product DescriptionThe nVent CADDY SCH40B is a single piece strut clamp designed for use with cable and conduit. This clamp accommodates conduit sizes between two inches and two point three-eight inches. It offers a load capacity of three hundred fifty pounds, making it suitable...

Product DescriptionThe nVent CADDY SCH48B is a single piece strut clamp designed for secure cable and conduit mounting. FM specification tested for EMT conduit sizes from one half to four inches. Easy installation with no screws or bolts required. Suitable for a variety of...

Product DescriptionThe nVent CADDY SCH56B is a single-piece strut clamp designed for use with cable and conduit. This clamp accommodates conduit sizes from two point seventy-two inches to three point five inches and supports loads up to three hundred fifty pounds. The clamp is...

Product Description The Nvent SCH6B is a one-piece strut clamp designed to secure EMT conduit and cable into the open side of strut channel. Constructed from steel with an electro-galvanized finish and a protective boot, it fits outer diameters from 0.100 to 0.63 inches...