NVENT

Product Description The NVENT CS812D is a cable and conduit stud attachment designed to secure EMT conduit and MC/AC cable to wall studs during electrical rough-in work. It positions the fastener directly on the stud, aligning conduit with box knockouts and reducing the need...

Product Description The NVENT CADDY CS812D is a screw-on conduit support that attaches 1/2" and 3/4" EMT conduit to metal or wood studs for 2 1/8 deep box. It accommodates EMT conduit and MC/AC cable. It is compliant with NEC Article 358.30(A) and CEC...

Product DescriptionThe nVent CADDY CS812D is a cable and conduit attachment designed to connect EMT conduit or MC/AC cable to wooden or metal studs. This product simplifies the installation of electrical conduits by eliminating the need for offset bends. Accommodates EMT conduit and MC/AC...

Product Description The NVENT CSD161210SS is a stainless steel wall-mount enclosure designed to house and protect electrical components, controls, or instrumentation in demanding environments. Wall-mount enclosures of this type provide a secure, weather-resistant housing for terminal blocks, circuit breakers, PLCs, and similar equipment. The...

Product DescriptionThe nVent HOFFMAN CSD16126SS Enclosure is a one-door unit designed for both indoor and outdoor applications. It measures sixteen inches long, twelve inches wide, and six inches deep. This enclosure features a NEMA 4X rating for corrosion protection, making it suitable for environments...

Product Description The NVENT csd16168ss is a NEMA Type 4X wall-mount enclosure built from 304 stainless steel for reliable protection in corrosive, wet, and washdown environments. It measures 16 inches high by 16 inches wide by 8 inches deep and features a quarter-turn latch...

Product Description The Nvent CSD20168 is a Concept single-door steel wall-mount enclosure measuring 20 x 16 x 8 inches. It is constructed with welded seams, a foam-in-place gasket and a powder-coated ANSI 61 finish, and provides NEMA 4 and 12 protection with IP66 ingress...

Product Description The NVENT CSD30308 is a steel electrical enclosure designed to house and protect electrical components, control panels, and wiring in demanding trade environments. Built for durability, this enclosure provides a secure, weather-resistant housing solution suited for electrical and industrial applications. Weighing 73.5...

Product Description The NVENT CSD363012SS is a stainless steel floor-standing or wall-mount enclosure designed to house electrical controls, instrumentation, and industrial components in demanding environments. Measuring 36 inches high by 30 inches wide by 12 inches deep, this enclosure provides substantial interior volume for...

Product Description The NVENT CSD36368 is a heavy-duty steel enclosure designed to house and protect electrical components, control equipment, and related hardware in industrial and commercial environments. At 91 pounds, this is a substantial, full-size cabinet built for applications where structural integrity and secure...

Product DescriptionThe NVENT CSP2420 is a swing-out panel designed for use inside electrical enclosures. It provides a mountable interior surface that pivots outward, giving technicians clear access to wiring, terminal blocks, DIN rails, and control components without removing the enclosure door. This type of...

Product Description The NVENT CSP3024 is a swing-out panel designed for use inside electrical enclosures, providing a mountable interior surface for organizing and securing control components, terminal blocks, DIN rail, and related hardware. Weighing 22.8 pounds, this panel swings outward on hinges to allow...

Product Description The NVENT CWHPTO is a die cast zinc padlocking handle designed for use with CONCEPT wall mount enclosures rated NEMA 3, 4, and 12. It provides a secure, tool-accessible locking point on enclosure doors, allowing a padlock to be used to restrict...

Product Description The NVENT DAH101 is a compact panel heater rated at 10 watts and 120 volts, designed to prevent condensation and moisture buildup inside electrical enclosures, control panels, and junction boxes. At 0.4 pounds, it installs easily in tight cabinet spaces without adding...

Product Description The NVENT DAH101TS is a thermostat designed for use in enclosure heating and temperature control applications. It provides reliable on/off switching to maintain setpoint temperatures within electrical enclosures, control panels, and similar industrial or commercial housings. Licensed technicians and electricians install this...

Product DescriptionThe nVent DAH2002A Electric Heater is part of the D85 series. This heater operates at two hundred watts and supports a voltage of two hundred thirty VAC. It is designed to protect mechanical and electrical equipment from low temperatures and condensation. The unit...

Product DescriptionThe NVENT dh4ti is a cellular floor deck hanger designed for suspending threaded rod from cellular steel floor decking. It features a positive locking through-deck tab that locks the hanger securely in place once installed, preventing rotation and loosening caused by vibration or...

Product DescriptionThe NVENT dh6ti is a cellular floor deck hanger clip designed to suspend threaded rod from cellular floor deck systems. Manufactured from spring steel with a Caddy Armour finish for corrosion resistance, this clip accepts a 3/8-inch threaded rod and carries a 160-pound...