ABB INSTALLATION PRODUCTS

Product DescriptionThe ABB INSTALLATION PRODUCTS 12007-100 is a 3/4-inch Electrical Non-Metallic Tubing (ENT) sold per foot. Known in the trade as Flex Plus Blue or smurf tube, this highly flexible conduit is designed for routing power conductors through walls and concrete encasements in new...

Product Description The ABB INSTALLATION PRODUCTS ozxa-24 is a terminal lug kit designed for use with OS100 type fusible disconnect switches. The kit includes 6 lugs and accepts both copper and aluminum conductors ranging from 14 AWG to 2/0 AWG. These lugs provide the...

Product DescriptionABB OWC T&B Old Work Box Support Clip is designed for use with steel switch boxes. It adapts easily to various wall types and securely holds boxes in place. This product is essential for old work applications in construction and electrical installations. Easy...

Product Description The ABB TY527MX high-performance cable tie is constructed from black Nylon 6.6. It measures 340.36mm (13.4 Inches) in length and 6.86mm (0.27 Inch) in width, accommodating bundle diameters up to 102mm (4 Inches). It features a tensile strength rating of 534 Newtons...

Product Description The ABB INSTALLATION PRODUCTS E945KX Carlon expansion coupling with adapter is a 2-1/2 inch PVC conduit fitting designed for use with Schedule 40 and 80 conduit. This non-metallic expansion coupling features an adapter end and male terminal for secure connections. It compensates...

Product Description Abb Installation Products 52C512-25 is a raised plaster ring for 4-inch electrical boxes that provides 14.8 cubic inches of capacity and a 2-inch raised depth. The single-gang, square-cut design positions switches or receptacles closer to the finished surface for masonry or plaster...

Product Description The ABB Installation Products S288LLN is a base-mount spacer designed for 3 in. power and communications duct. The Snap-Loc styrene construction provides support for 3-inch non-metallic ducts and maintains consistent 3 in. spacing between runs. It is intended for use in power...

Product Description The ABB Installation Products 521711234E is a welded-style steel outlet box that provides 30.3 cubic inches of internal capacity in a 4 in x 4 in x 2-1/8 in housing. It features thirteen knockouts including 1/2 in and 3/4 in eccentric options,...

Product Description Abb Installation Products TK118A is a compression coupling designed for concrete-tight connections with EMT conduit. The TK118A couples 3-inch EMT conduit and measures 4.958 inches in length; it is constructed from zinc-plated steel to provide a corrosion-resistant mechanical joint for electrical conduit...

Product Description The Abb Installation Products B520A-UPC is a round ceiling outlet box for new work and general applications. It has non-metallic polycarbonate construction with a 4 in diameter, 2-1/4 in depth and 20 cu-in capacity. The nail-mount design includes mounting nails, a ground...

Product Description Abb Installation Products WR9 is a compression overhead cable tap in a Figure H shape designed for aluminum, copper, and ACSR conductors. The WR9 accepts run conductor sizes of 1–4 solid AL/CU, 2–6 stranded AL/CU, and 3–6 ACSR, and tap conductor sizes...

Product Description ABB Installation Products E997J is a 2-inch PVC bell end fitting for conduit termination compatible with Schedule 40 and Schedule 80 conduit. The bell end provides a smooth, rounded pulling surface to protect cables during installation and yields a secure termination for...

Product Description Abb Installation Products ICS73-1 is an insulated service entrance splice designed for 2 to 1 AWG ACSR and stranded conductors. The aluminum crimp body measures approximately 2-25/32 inches and uses die code 5/8. A stabilized nylon sleeve provides 600 VAC insulation and...

Product Description Abb Installation Products CY-1/2 is a gangable switch box extension constructed of pre-galvanized steel with a flush-ear mounting design. The box provides 18 cubic inches of capacity and measures approximately 3 in. x 2 in. x 3-1/2 in., with 1/2 in. knockouts...

Product Description The ABB Installation Products RB14-250F is a 250 series insulated nylon female disconnect for 16-14 AWG wire. It features an electro-tin plated brass contact with a brazed seam serrated barrel for enhanced tensile strength and an insulated nylon sleeve rated to 105...

Product Description ABB Installation Products 54174 is a Color-Keyed 1-hole non-insulated compression lug designed for 250 kcmil copper conductors. The lug features die code 62, a peep inspection hole, and fits a 3/8 in stud. It is constructed of high-conductivity copper with tin plating,...

Product Description Abb Installation Products E948N is a non-metallic PVC long-line sleeve coupling designed to join or repair 4 in conduit runs. It fits Schedule 40/STD and Schedule 80/XH conduit, employs a socket end with no internal stop, and measures approximately 6.50 in overall...

Product DescriptionThe ABB INSTALLATION PRODUCTS UA9AFB-CTN is a Schedule 40 non-metallic rigid conduit elbow designed to make a 90-degree change of direction in an electrical conduit run. Built from PVC with a standard radius bend, it includes a belled end that accepts standard conduit...