mak-a-key

Product Description The MAK-A-KEY 0601250125-12 is an oversized key stock bar used to secure rotating components to shafts in mechanical drive assemblies. Machined from Alloy 360 brass, this key stock measures 1/8 inch high by 1/8 inch wide by 12 inches long. The oversized...

Product DescriptionThe MAK-A-KEY 0601870187-12 is an oversized key stock bar cut to 12 inches in length with a 3/16 inch height and 3/16 inch width. Machined from Alloy 360 brass, this key stock is used to transmit torque between a shaft and a mating...

Product DescriptionThe MAK-A-KEY 0602500250-12 is an oversized key stock bar used to transmit torque between a shaft and a mating hub or sprocket in mechanical power-transmission assemblies. Machined from Alloy 360 brass, this bar measures 0.25 inches high, 0.25 inches wide, and 12 inches...

Product DescriptionThe MAK-A-KEY 0603120312-12 is an oversized key stock bar used to transmit torque between a shaft and a hub, gear, pulley, or sprocket. Machined from Alloy 360 brass, it measures 5/16 inches high by 5/16 inches wide by 12 inches long. The oversized...

Product DescriptionThe MAK-A-KEY 0603750375-12 is an oversized key stock bar used to transmit torque between a shaft and a mating hub, gear, or pulley in mechanical drive assemblies. Machined from Alloy 360 brass, this key stock measures 3/8 inches high by 3/8 inches wide...

Product DescriptionThe MAK-A-KEY 0605000500-12 is an oversized key stock bar used to transmit torque between a shaft and a mating hub, gear, pulley, or sprocket. Machined from Alloy 360 brass, this key stock measures 0.5 inches high by 0.5 inches wide by 12 inches...

Product DescriptionThe MAK-A-KEY 3101250125-12 is an undersized key stock piece used to secure rotating components to shafts in mechanical drive systems. Machined from C1018 steel and finished with a zinc plating for corrosion resistance, this key stock measures 0.125 inches high by 0.125 inches...

Product Description The MAK-A-KEY 3101870187-12 is an undersized key stock bar used to secure rotating components to shafts in mechanical drive systems. Cut from C1018 low-carbon steel and finished with a zinc plating for corrosion resistance, this key stock measures 3/16 inches high by...

Product DescriptionThe MAK-A-KEY 3102500250-12 is an undersized key stock bar used to secure rotating components to shafts in mechanical drive assemblies. Machined from C1018 steel with a zinc-plated finish for corrosion resistance, this key stock measures 0.25 inches high, 0.25 inches wide, and 12...

Product Description The MAK-A-KEY 3103120312-12 is an undersized key stock bar used to secure rotating components to shafts in mechanical power transmission assemblies. Machined from C1018 steel and finished with a zinc plating for corrosion resistance, this key stock measures 5/16 inches high by...

Product Description The MAK-A-KEY 3103750375-12 is an undersized key stock bar used to transmit torque between a shaft and a mating hub, gear, pulley, or sprocket. Machined from C1018 steel with a zinc-plated finish for corrosion resistance, this bar measures 3/8 inch high by...

Product DescriptionThe MAK-A-KEY 3104370437-12 is an undersized key stock bar used to secure rotating components to shafts in mechanical power transmission assemblies. Machined from C1018 steel with a zinc-plated finish for corrosion resistance, this key stock measures 7/16 inches high by 7/16 inches wide...

Product DescriptionThe MAK-A-KEY 3105000500-12 is an undersized key stock bar used to secure rotating components such as gears, pulleys, and sprockets to shafts in mechanical power transmission assemblies. Manufactured from C1018 steel with a zinc-plated finish for corrosion resistance, this key stock measures 0.5...

Product Description The MAK-A-KEY 3106250625-12 is undersized key stock used to secure rotating components such as pulleys, sprockets, and gears to shafts in mechanical drive systems. Manufactured from C1018 steel with a zinc-plated finish, this key stock measures 5/8 inches high by 5/8 inches...

Product DescriptionThe MAK-A-KEY 3107500750-12 is an undersized key stock bar used to transmit torque between a shaft and a hub in mechanical drive assemblies. Machined from C1018 steel with a zinc-plated finish, this key stock measures 0.75 inches high by 0.75 inches wide by...

Product DescriptionThe MAK-A-KEY 3110001000-12 is an undersized key stock bar used to transmit torque between a shaft and a hub in mechanical drive assemblies. Manufactured from C1018 steel with a zinc-plated finish, this key stock measures 1 inch high by 1 inch wide by...

Product Description The MAK-A-KEY 3603120312-12 is an oversized key stock used to secure rotating components - such as pulleys, sprockets, and gears - to shafts in mechanical drive systems. Manufactured from C1018 steel with a zinc-plated finish for corrosion resistance, this key stock measures...

Product Description The MAK-A-KEY 3606250625-12 is a square oversized key stock bar used to transmit torque between a shaft and a rotating component such as a pulley, sprocket, or gear. Machined from C1018 steel with a zinc-plated finish for corrosion resistance, this piece measures...

Product Description The MAK-A-KEY 3606870687-12 is an oversized key stock bar used to transmit torque between a shaft and a hub or pulley in mechanical drive assemblies. Machined from C1018 steel with a zinc-plated finish for corrosion resistance, this key stock measures 11/16 inches...

Product DescriptionThe MAK-A-KEY 3607500750-12 is an oversized key stock segment used to secure rotating components - such as pulleys, sprockets, and gears - to shafts in mechanical drive assemblies. Machined from C1018 steel and finished with a zinc plating for corrosion resistance, this key...