CLEVELAND

Product Description Cleveland 03506 is a 3-pole contactor with a 110/120 V coil rated for 60 A inductive and 75 A resistive service. It functions as a compact electromechanical switching device for commercial appliances and foodservice equipment, providing controlled interruption of heating elements and...

Product Description The Cleveland 03546 is a 25V direct spark ignition module that provides spark ignition and flame sensing for commercial cooking equipment. It features a 4-second lockout, a single electrode for both flame sensing and spark generation, a top-mounted Rajah spark terminal, five...

Product Description The Cleveland 05101 ignition sensor is an OEM ignitor electrode used in Cleveland commercial cooking and steamer equipment, listed as a replacement for Mavrik units. The sensor produces the spark required to initiate burner ignition and mounts near the combustion chamber for...

Product Description The Cleveland 07106 is an OEM hand hole gasket for boilers and steam cooking equipment, listed as CLE07106 (AllPoints product 8046271). It provides a sealing surface for boiler hand hole openings to maintain pressure and prevent leaks. The gasket measures 7.25 x...

Product Description The Cleveland 07128 is a gasket for 3-inch flange heaters and serves as an OEM replacement gasket for Cleveland heater flanges. It provides a flange seal for select Cleveland oven, steamer, and heater models and is supplied as a single unit. Measured...

Product Description Cleveland 07136 is a silicone door gasket intended for Cleveland steamers and commercial appliance doors. The gasket uses a Type C silicone rubber closed-loop profile with an overall length of 80 inches and a 0.75 x 0.75 inch cross-section. It installs as...

Product Description The Cleveland 07138 is a replacement door gasket for Cleveland convection steamer SC II that forms a seal to maintain steam and cooking temperatures. The part corresponds to AllPoints OEM CLE07138 and product 8046274. It is intended for use as an OEM...

Product Description Cleveland 08511 is an EPDM hose with a 3/4 inch inner diameter designed for food-contact and steamer applications and sold by the foot. The hose is listed as FDA compatible and is used to deliver steam in Cleveland steamers and convection steamers....

Product Description The Cleveland 100241-CLE is an adjustable foot designed to fit 1-1/4 inch square tube applications on commercial appliance and tubular equipment. It provides height adjustment and a stable base to level equipment on uneven surfaces. Physical dimensions are 3.35 in length, 2.10...

Product Description The Cleveland 100285 heavy hex nut is an OEM stainless steel fastener with 1/4-20 UNC-2B threading and a class 2B internal thread fit. The heavy hex profile provides increased wrenching surface for appliance and commercial equipment assemblies. This part is sold individually...

Product Description The Cleveland 100330 is a hand hole gasket for Cleveland steamers that provides an oval-profile rubber seal for hand hole cover plate 24-1163. The Type C gasket has nominal outside dimensions of approximately 5-1/16 x 4-1/8 inches and a low profile thickness,...

Product Description The Cleveland 102263 is a female bullet push-on terminal designed for quick-disconnect electrical connections. It provides a push-on style female bullet connector for wire-to-wire or wire-to-terminal connections and serves as an OEM replacement for Cleveland commercial appliance and foodservice equipment. The part...

Product Description The Cleveland 102533 contact block is an OEM replacement block used with rotary switch #42-1773 for Cleveland convection steamers and compatible commercial units. It is specified for use in models such as 21-CET-8 and 21-CET-16 and fits applicable 10-pan units. The part...

Product Description The Cleveland 102534 is a rotary on/off selector switch used as an OEM replacement for specified Cleveland steamers. It interfaces with contact block 42-1766 and fits convection steamer models 21-CET-8, 21-CET-16 and applicable 10-pan units. The compact switch measures 3.8 x 2.5...

Product Description The Cleveland 103731 is a high-limit capillary thermostat (type 10H11) used to detect excessive temperature and provide a safety cutoff for commercial cooking and steam equipment. It is rated to 284 °F and includes a 26-inch capillary sensing tube with 1.64-inch mount...

Product Description The Cleveland 104026 door gasket is a Type C rubber replacement gasket sized 18 x 15.75 x 0.5 inches designed for Cleveland steamers and convection steamer units. It functions as a sealing gasket for steamer and oven doors to retain steam and...

Product Description The CLEVELAND 104053 is an OEM replacement label and overlay designed for digital timer controls on Cleveland commercial cooking equipment. This overlay presents clear timing information and control markings directly on the control face, giving operators accurate reference points for time settings...

Product Description The Cleveland 104062 snap ring is a small retaining ring used in parts assemblies and commercial appliance equipment, listed as product 264449 (26-4449). Sized 0.50 x 0.44 x 0.06 inches, the ring serves as an external retaining/circlip to prevent lateral movement, maintain...

Product Description The Cleveland 104082 gasket for steam injector (S/C) is an OEM replacement gasket designed to seal the steam injector assembly in compatible Cleveland commercial appliances. The part is sold each and has nominal dimensions of 1.10 in length, 1.05 in width, and...

Product Description Cleveland 104196 is an OEM switch assembly (AllPoints CLE104196) for Cleveland equipment, intended as a replacement electric control or steam compartment shut switch. The assembly measures approximately 0.85 x 0.80 x 0.10 inches and is manufactured in the United States. It is...