rittal

Product Description Rittal 4155010 is a cabinet luminaire with an integrated motion detector designed for mounting inside enclosures and cabinets. It features an isolated plastic housing and operates from 110–240 V AC at 50/60 Hz. The built-in presence sensor provides automatic on/off lighting based...

Product DescriptionThe RITTAL 4173000 is a punched mounting rail designed for use inside Rittal TS and SE modular enclosure systems. The rail features a 23 x 23 mm profile machined from sheet steel with a zinc-plated surface finish that resists corrosion in demanding panel...

Product Description The RITTAL 4179000 is a slide U-nut with M6 thread designed for securing punched rails and mounting chassis inside electrical enclosures and control panels. The nut slides into a punched rail slot and locks in place, providing a reliable threaded attachment point...

Product DescriptionThe RITTAL 4396000 is a set of four zinc-plated sheet steel support rails designed for heavy-duty component mounting inside industrial electrical enclosures. These slotted rails provide a rigid mounting platform for heavy equipment, and are particularly suited for the installation of base isolators...

Product Description The RITTAL 4579000 is a pack of 20 sheet steel door bars designed for use with 900mm deep enclosures. Door bars serve as structural cross-members or retention bars that support door alignment, reinforce panel rigidity, or secure door assemblies on industrial enclosures...

Product Description The RITTAL 4582500 is a flat baying bracket designed to interconnect and stabilize adjacent enclosures in modular panel installations. Constructed from zinc-plated carbon steel, this bracket provides corrosion resistance suited to industrial environments. It uses snap-on nut mounting for straightforward attachment without...

Product Description The RITTAL 4591700 is a mounting plate infill designed for use with TS 8 enclosures in industrial electrical and control panel applications. Fabricated from sheet steel with a zinc-plated finish, this infill plate fills unused panel mounting space inside the enclosure, maintaining...

Product DescriptionThe Rittal 4911000 Adjacent Door Latch Interlock Kit is designed for use with the TS Series 1/2-Door. This kit provides a reliable solution for locking bayed combination enclosures and integrates a conventional master switch. It is constructed from steel and features a zinc...

Product Description Rittal 4911100 is an adjacent door latch designed for two-door TS series enclosures to provide mechanical interlock and door-locking for bayed enclosure combinations. The latch extends conventional master switch door locks so the main door must be opened before adjacent doors, and...

Product Description The RITTAL 4918000 interconnecting rod extends locking from the main enclosure to adjacent enclosures of a bayed suite. It is made of sheet steel with a powder-coated finish. An interconnecting rod corresponding to the width of the enclosure is required for each...

Product Description The RITTAL 4920000 is a sheet steel interconnecting rod designed to extend the locking mechanism from a primary TS enclosure to adjacent enclosures in a bayed suite. When multiple enclosures are joined side by side, a single door-locking action on the main...

Product Description The RITTAL 5001220 is a zinc-plated sheet steel gland plate designed for use with CM and TP series enclosures. Gland plates provide a structured entry point for cables and conduit runs entering an enclosure, allowing technicians to maintain a clean, organized wiring...

Product DescriptionThe RITTAL 5001222 is a CM series gland plate designed to provide a clean, organized cable entry point at the base or top of compatible Rittal CM enclosures. The plate spans 250mm and fits enclosures with a 600mm width, allowing electricians and panel...

Product Description The RITTAL 5050070 is an enclosure accessory, specifically a TS accessory bag designed for double door configurations. This accessory bag is designed for use with enclosures. It is designed for TS series enclosures. Designed for TS series enclosures Accessory bag for enclosures...

Product Description The RITTAL 5050172 is a right-hand swing enclosure door designed for use with two-door TS series enclosures. It measures 78.74 inches in height and 23.62 inches in width, making it suited for full-height industrial enclosure installations. The door ships as a complete...

Product Description The RITTAL 5050178 is the left-hand door designed for use with Rittal's two-door TS series enclosures in the 79-inch by 24-inch configuration. This replacement and OEM-spec door ships complete with a door locking rod with double-bit insert, a tubular door frame, and...

Product Description The RITTAL 5051037 mounting panel is designed for VX and TS enclosures. Constructed from carbon steel with a zinc-plated finish, it provides a sturdy surface for mounting electrical components. This mounting panel is suitable for enclosures with a width of 600 mm...

Product Description The RITTAL 5051045 is a mounting plate attachment designed for use with sheet steel enclosures. It provides a secure, stable connection point for mounting plates inside electrical enclosures, keeping internal components properly positioned and mechanically retained. This hardware is sold individually as...

Product Description The Rittal 5051300 accessory bag is designed for AX series enclosures to store installation parts, spare parts, and small components during installation, service, or repair. Identified as article number AX 5051300, the item is listed as new and active in Rittal documentation...