raindrip

Product Description The RAINDRIP INC R307CT is a 1/4 inch barbed tee fitting designed for use in drip irrigation and micro-irrigation systems. Each pack contains five fittings, allowing technicians and installers to complete multiple connections in a single purchase. The barbed design creates a...

Product DescriptionThe RAINDRIP INC R325CT is a hose thread tubing adapter designed to connect a standard 3/4-inch hose thread fitting to 1/4-inch drip irrigation tubing. This fitting serves as a transition point between a threaded hose connection and small-diameter supply tubing, making it a...

Product Description The RAINDRIP INC R326CT is a pipe thread tubing adapter designed to connect 1/4 inch drip irrigation tubing to a 3/4 inch male pipe thread fitting. Each adapter includes a washer for a secure, leak-resistant seal. This fitting is a standard component...

Product DescriptionThe RAINDRIP INC R333CT is a 3/4-inch pipe thread swivel by 1/2-inch compression tee fitting designed to connect a threaded pipe fitting to 1/2-inch poly or irrigation tubing at a tee junction. The swivel inlet allows for easy hand-tightening without twisting the supply...

Product Description The RAINDRIP INC R334CT is a swivel tee fitting designed for use with 0.5-inch risers in drip and low-volume irrigation systems. The swivel design allows for easy angle adjustment during installation, reducing stress on tubing connections and simplifying alignment in the field....

Product Description The RAINDRIP INC R337CT is a drip irrigation swivel tee designed to connect drip tubing to a threaded sprinkler riser. It features a 3/4 inch Female Hose Thread (FHT) inlet on one end and a 5/8 inch compression fitting on the other....

Product DescriptionThe RAINDRIP INC R338CT is a 1/4-inch drip line tap-off fitting designed to connect 1/4-inch tubing to the existing 1/2-inch male pipe thread of an underground sprinkler riser. Each unit includes a filter cone to help prevent debris from entering the drip line....

Product Description The RAINDRIP INC R380CT is a pack of 10 support stakes designed to anchor 1/4 inch drip irrigation tubing securely in place. Each stake measures 4 inches in length, providing enough ground penetration to hold tubing flat along garden beds, landscaping borders,...

Product DescriptionThe RAINDRIP INC R382CT is an 8-inch sprinkler support stake designed to hold low-volume sprinklers and sprayers securely in place during irrigation operation. Each stake includes a 4-inch riser, allowing for proper head height positioning in drip and micro-irrigation layouts. Sold in a...

Product Description The RAINDRIP INC R390CT is a pack of 15 support clamps designed to secure 1/4-inch drip irrigation tubing to fixed surfaces. These clamps hold tubing firmly in place along posts, beams, and stucco walls, keeping irrigation lines routed cleanly and preventing sagging...

Product Description The RAINDRIP INC R396CT is a galvanized wire U-shaped support stake designed to secure 0.25-inch drip irrigation tubing at the soil surface next to plants. Each stake is formed from galvanized wire, giving it corrosion resistance in wet soil conditions. At 3.5...

Product Description The RAINDRIP INC R460CB is a pre-set hose pressure regulator designed to reduce incoming water pressure to a consistent 15-20 psi range at a 3/4-inch hose connection. This type of regulator protects drip irrigation emitters, micro-spray heads, and soaker hose systems from...

Product DescriptionThe RAINDRIP INC R567DT is a complete drip irrigation kit designed for watering vegetable gardens. It ships with all the fittings and emitters needed to set up a low-flow drip system at a standard garden hose bib. The kit centers on 25 half-GPH...

Product DescriptionThe RAINDRIP INC R612CT is a 2-pack of 1/4 inch barbed valves designed to adjust, balance, or shut off water flow in low-volume drip and micro-irrigation systems. Each valve connects to 1/4 inch rigid poly risers with an outer diameter range of 0.160...

Product DescriptionThe RAINDRIP INC R630CT is a hole punch tool packaged with hole plugs, designed for use in drip irrigation tubing installation and maintenance. The tool creates clean, uniform holes in poly drip line tubing, allowing technicians to add emitters, barbed fittings, or lateral...

Product Description The RAINDRIP INC R647CT is a combination bug plug and diffuser designed for use in drip irrigation systems. It serves two functions: sealing open 0.25-inch tubing ends to block insect entry, and spreading water flow when installed with high-flow emitters or bubblers....

Product Description The RAINDRIP INC R675CT is a battery-operated analog electronic water timer designed for outdoor faucet and hose spigot irrigation control. The unit threads directly onto a standard 3/4-inch female hose thread inlet and features a swivel 3/4-inch male hose thread outlet for...

Product DescriptionThe RAINDRIP INC SDFSTH1P is a complete drip irrigation kit designed for watering flowers, shrubs, and trees without the need for additional tools. The kit includes 10 pre-assembled 3-inch clamp and pierce feeder lines, each fitted with a 2 GPH dripper for consistent,...

Product DescriptionThe RAINDRIP INC SDGCBHP is a complete ground cover and flowerbed drip irrigation kit designed for residential landscape irrigation. The kit includes four pre-assembled 2-foot Clamp N Pierce feeder lines, each fitted with a half-circle adjustable sprayer, along with a battery-operated timer to...