raindrip

Product Description The RAINDRIP INC 180JET010B is a half circle micro spray jet head sold in a 10-pack, designed for low-volume irrigation in landscaped beds and sloped terrain. Each head distributes water in a 180-degree arc, delivering targeted coverage to plant root zones without...

Product DescriptionThe RAINDRIP INC 300025B is a 25-pack of hose end clamps designed to close off the open ends of poly hose with an outside diameter ranging from 0.5 inches to 0.625 inches. These clamps provide a secure, leak-free termination point on drip irrigation...

Product Description The RAINDRIP INC 320G00UB is a straight hose thread swivel adapter designed to connect 1/2-inch poly drip irrigation hose to a standard 3/4-inch male hose thread outlet such as a faucet or zone valve. The swivel end is 3/4 inches female hose...

Product DescriptionThe RAINDRIP INC 321G00UB is a 3/4-inch male pipe thread swivel with a 1/2-inch compression adapter, designed to connect 1/2-inch poly hose to a 3/4-inch male pipe thread fitting. The swivel design allows the hose connection to rotate without twisting the line, reducing...

Product Description The RAINDRIP INC 325G00UB is a 3/4-inch hose thread swivel to 1/4-inch compression adapter designed to connect 1/4-inch drip irrigation tubing directly to a faucet or any standard 3/4-inch male hose thread outlet. The swivel end allows for easy hand-tightening without twisting...

Product DescriptionThe RAINDRIP INC 328G00UB is a swivel-to-compression adaptor designed to connect 5/8 inch poly hose to a 3/4 inch male pipe thread fitting. One end features a 3/4 inch male pipe thread swivel connection, while the other accepts 5/8 inch poly hose with...

Product Description The RAINDRIP INC 347G00UB is a 3-way compression tee fitting designed for use with 1/2 inch drip irrigation tubing. It creates a branch connection in a drip line without the need for barbed fittings or clamps, relying instead on a compression-style joint...

Product Description The RAINDRIP INC 356G00UB is a 3/4-inch hose thread swivel adapter designed to create a leak-resistant, rotatable connection between a standard hose thread fitting and a 0.710-inch tubing or barb outlet. The swivel design allows the connection to rotate freely after installation,...

Product Description The RAINDRIP INC 360JET010B is a full-circle 12-stream spray jet head designed for low-volume drip and micro-irrigation systems. It distributes water in a complete 360-degree pattern using 12 individual streams, delivering even coverage across the irrigated area. Licensed irrigation professionals and landscape...

Product Description The RAINDRIP INC 368G00UB is a 5/8 inch compression elbow fitting designed for drip and low-volume irrigation systems. It creates a directional change in tubing runs without the need for solvent or heat, using a black compression ring to grip and seal...

Product DescriptionThe RAINDRIP INC 369G00UB is a 0.710-inch compression elbow designed for use in drip irrigation and low-pressure water distribution systems. This fitting creates a secure, leak-resistant directional change in tubing runs without the need for clamps or adhesives. The compression-style connection seats the...

Product Description The RAINDRIP INC 384ROUB is a heavy duty irrigation stake designed for securing low volume sprinkler heads and spray heads in landscape and drip irrigation systems. The stake measures 13 inches in length and includes an 8 inch adjustable rigid riser, giving...

Product DescriptionThe RAINDRIP INC 397015B is a 15-pack of 8-inch galvanized wire hook stakes designed to secure irrigation supply lines in place along the ground. Each stake arrives pre-bent into a shepherd-hook profile, eliminating field bending and speeding up line installation. The hooks accept...

Product Description The RAINDRIP INC 46200UB is a preset pipe pressure regulator designed for drip and low-flow irrigation systems. It accepts a 3/4 inch pipe thread inlet and delivers flow through a 3/4 inch pipe thread outlet, maintaining a steady output pressure in the...

Product Description The RAINDRIP INC 612010B is a 1/4-inch barbed valve sold in a 10-pack for drip irrigation systems. Each valve gives the installer manual control over water flow to individual watering circuits, zones, or plants. The valve adjusts, balances, or shuts off flow...

Product Description The RAINDRIP INC 61700UB is a compression inlet/outlet shut-off valve designed for use with 1/2-inch drip irrigation hose. It accepts hose with an outer diameter between 0.615 inches and 0.630 inches and is rated for water pressure up to 60 psi. The...

Product Description The RAINDRIP INC 63000UB is a hand tool designed to punch clean holes in drip irrigation poly hose for the installation of PC drippers and fittings. It accepts three common hose sizes: 1/2 inch, 5/8 inch, and 0.710 inch outside diameter tubing....

Product Description The RAINDRIP INC 63100UB is a professional-grade hole punch designed for use in drip irrigation installations. It punches clean, correctly sized holes in 1/2 inch, 5/8 inch, or 0.710 inch drip tubing to accept PC drippers or 1/4 inch barbed fittings. The...

Product Description The RAINDRIP INC 646050B is a double-ended hole plug designed to seal unwanted or unused holes in drip irrigation tubing. Each plug features two ends of different sizes, allowing it to close either large or small holes in 0.5-inch, 0.625-inch, or 0.710-inch...

Product Description The RAINDRIP INC A159CPUB is an adjustable full-circle stake sprinkler designed for low-volume drip and micro-irrigation systems. The unit features a stream-spray bubbler head that allows both height and flow rate (gallons per hour) to be independently adjusted, giving installers precise control...