Raindrip Inc 356G00UB Hose Thread Swivel Adapter 50 Pack

Product Description

The RAINDRIP INC 356G00UB is a 3/4-inch hose thread swivel adapter designed to create a leak-resistant, rotatable connection between a standard hose thread fitting and a 0.710-inch tubing or barb outlet. The swivel design allows the connection to rotate freely after installation, reducing hose kink and strain at the fitting joint. A washer is included to ensure a secure, drip-free seal without the need for additional tape or sealant. This adapter is sold in a bulk pack of 50 units, making it well-suited for irrigation contractors and service technicians who install or maintain drip irrigation and micro-spray systems.

This swivel adapter is used in residential and light commercial drip irrigation systems where a garden hose thread source connects to smaller-diameter distribution tubing. Common install scenarios include connecting hose-end drip kits to a faucet or hose bib, transitioning from a 3/4-inch hose thread supply to 0.710-inch mainline tubing at the head of an irrigation zone. The bulk packaging of 50 units supports larger irrigation installations or restocking field service kits.

Key Features

• 3/4-inch hose thread inlet swivels freely to reduce hose torque and kink at the connection point
• 0.710-inch adapter outlet for direct connection to standard drip irrigation mainline tubing
• Included washer provides a seal without additional thread tape or compound
• Bulk pack of 50 units reduces per-unit cost for volume installations
• Compact, lightweight fitting suitable for portable or permanent drip irrigation setups

Compatibility

Designed as an OEM-style fitting for use with standard 3/4-inch hose thread supply connections and 0.710-inch drip irrigation mainline tubing in residential and light commercial irrigation systems.

Installation Notes

Installation is typically performed by irrigation technicians or plumbers working on low-pressure drip systems. Shut off the water supply at the source before connecting or disconnecting fittings. Hand-tighten the hose thread connection first, then snug with pliers — do not overtighten, as this can crack the fitting body or deform the washer. Verify the washer is seated flat in the fitting before final assembly to ensure a leak-free joint.